塑胶原料之家
  1. 首页
  2. 英文物性
  3. LCP
  4. Celanese Zenite® 6140L BK010 LCP

Celanese Zenite® 6140L BK010 LCP

Celanese Zenite® 6140L BK010 LCP 物性表: Celanese Zenite® 6140L BK010 LCP物性表及特性介绍,Celanese Zenite® 6140L BK010 LCP注塑参数详情,如需Celanese Zenite® 6140L BK010 LCP下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.71
  • 缺口冲击强度: 1.12
  • 弯曲强度 [MPa]: 135.0
  • 弯曲模量 [MPa]: 16.5
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.71 g/cc1.71 g/ccASTM D 792
Density 1.71 g/cc0.0618 lb/in³ISO 1183
Filler Content 40 %40 %
Linear Mold Shrinkage, Flow 0.00050 cm/cm
@Thickness 2.00 mm		0.00050 in/in
@Thickness 0.0787 in		Parallel; ISO 294-4
Linear Mold Shrinkage, Transverse 0.0050 cm/cm
@Thickness 2.00 mm		0.0050 in/in
@Thickness 0.0787 in		ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 130 MPa18900 psiISO 527
Tensile Strength, Ultimate 135 MPa
@Thickness 3.17 mm,
Temperature 23.0 °C		19600 psi
@Thickness 0.125 in,
Temperature 73.4 °F		ASTM D638
Elongation at Break 1.1 %1.1 %ISO 527
 1.3 %
@Thickness 3.17 mm,
Temperature 23.0 °C		1.3 %
@Thickness 0.125 in,
Temperature 73.4 °F		ASTM D638
Tensile Modulus 17.0 GPa
@Temperature 23.0 °C		2470 ksi
@Temperature 73.4 °F		ISO 527
Flexural Strength 190 MPa
@Temperature 23.0 °C		27600 psi
@Temperature 73.4 °F		ISO 178
 183 MPa
@Thickness 3.17 mm,
Temperature 23.0 °C		26500 psi
@Thickness 0.125 in,
Temperature 73.4 °F		ASTM D790
Flexural Modulus 16.5 GPa
@Temperature 23.0 °C		2390 ksi
@Temperature 73.4 °F		ISO 178
 15.6 GPa
@Thickness 3.17 mm,
Temperature 23.0 °C		2260 ksi
@Thickness 0.125 in,
Temperature 73.4 °F		ASTM D790
Izod Impact, Notched 1.12 J/cm
@Thickness 3.17 mm,
Temperature 23.0 °C		2.10 ft-lb/in
@Thickness 0.125 in,
Temperature 73.4 °F		ASTM D256
Izod Impact, Notched (ISO) 12.0 kJ/m²
@Temperature 23.0 °C		5.71 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1A
Izod Impact, Unnotched (ISO)  20.0 kJ/m²
@Temperature -30.0 °C		9.52 ft-lb/in²
@Temperature -22.0 °F		ISO 180/1U
 20.0 kJ/m²
@Temperature 23.0 °C		9.52 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1U
Charpy Impact Unnotched  2.00 J/cm²
@Temperature -30.0 °C		9.52 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eU
 2.30 J/cm²
@Temperature 23.0 °C		10.9 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eU
Charpy Impact, Notched  1.50 J/cm²
@Temperature -30.0 °C		7.14 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eA
 1.50 J/cm²
@Temperature 23.0 °C		7.14 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity >= 1.00e+15 ohm-cm>= 1.00e+15 ohm-cmIEC 60093
 1.00e+16 ohm-cm1.00e+16 ohm-cmIEC 60093
Surface Resistance >= 1.00e+15 ohm>= 1.00e+15 ohmIEC 60093
 1.00e+16 ohm1.00e+16 ohmIEC 60093
Dielectric Strength  27.0 kV/mm
@Thickness 2.00 mm		686 kV/in
@Thickness 0.0787 in		IEC 60243-1
 45.0 kV/mm
@Thickness 1.00 mm		1140 kV/in
@Thickness 0.0394 in		IEC 60243-1
Comparative Tracking Index 175 V175 VIEC 60112
 175 - 249 V175 - 249 VUL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear  0.000 µm/m-°C
@Thickness 2.00 mm,
Temperature 160 - 260 °C		0.000 µin/in-°F
@Thickness 0.0787 in,
Temperature 320 - 500 °F		ISO 11359-1/-2
 2.00 µm/m-°C
@Thickness 4.00 mm,
Temperature 160 - 260 °C		1.11 µin/in-°F
@Thickness 0.157 in,
Temperature 320 - 500 °F		ISO 11359-1/-2
 3.00 µm/m-°C
@Thickness 4.00 mm,
Temperature -40.0 - 23.0 °C		1.67 µin/in-°F
@Thickness 0.157 in,
Temperature -40.0 - 73.4 °F		ISO 11359-1/-2
 3.00 µm/m-°C
@Thickness 2.00 mm,
Temperature -40.0 - 23.0 °C		1.67 µin/in-°F
@Thickness 0.0787 in,
Temperature -40.0 - 73.4 °F		ISO 11359-1/-2
 3.00 µm/m-°C
@Thickness 2.00 mm,
Temperature -40.0 - 260 °C		1.67 µin/in-°F
@Thickness 0.0787 in,
Temperature -40.0 - 500 °F		ISO 11359-1/-2
 3.00 µm/m-°C
@Thickness 4.00 mm,
Temperature -40.0 - 260 °C		1.67 µin/in-°F
@Thickness 0.157 in,
Temperature -40.0 - 500 °F		ISO 11359-1/-2
 3.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 23.0 - 55.0 °C		1.67 µin/in-°F
@Thickness 0.0787 in,
Temperature 73.4 - 131 °F		ISO 11359-1/-2
 3.00 µm/m-°C
@Thickness 2.00 mm,
Temperature 55.0 - 160 °C		1.67 µin/in-°F
@Thickness 0.0787 in,
Temperature 131 - 320 °F		ISO 11359-1/-2
 4.00 µm/m-°C
@Thickness 4.00 mm,
Temperature 23.0 - 55.0 °C		2.22 µin/in-°F
@Thickness 0.157 in,
Temperature 73.4 - 131 °F		ISO 11359-1/-2
 5.00 µm/m-°C
@Thickness 4.00 mm,
Temperature 55.0 - 160 °C		2.78 µin/in-°F
@Thickness 0.157 in,
Temperature 131 - 320 °F		ISO 11359-1/-2
CTE, linear, Transverse to Flow  55.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		30.6 µin/in-°F
@Temperature -40.0 - 73.4 °F		ISO 11359-1/-2; 2mm
 56.0 µm/m-°C
@Temperature -40.0 - 23.0 °C		31.1 µin/in-°F
@Temperature -40.0 - 73.4 °F		ISO 11359-1/-2; 4mm
 77.0 µm/m-°C
@Temperature -40.0 - 260 °C		42.8 µin/in-°F
@Temperature -40.0 - 500 °F		ISO 11359-1/-2; 2mm
 79.0 µm/m-°C
@Temperature -40.0 - 260 °C		43.9 µin/in-°F
@Temperature -40.0 - 500 °F		ISO 11359-1/-2; 4mm
 62.0 µm/m-°C
@Thickness 2.00 mm,
Temperature 23.0 - 55.0 °C		34.4 µin/in-°F
@Thickness 0.0787 in,
Temperature 73.4 - 131 °F		ISO 11359-1/-2
 64.0 µm/m-°C
@Thickness 4.00 mm,
Temperature 23.0 - 55.0 °C		35.6 µin/in-°F
@Thickness 0.157 in,
Temperature 73.4 - 131 °F		ISO 11359-1/-2
 80.0 µm/m-°C
@Thickness 2.00 mm,
Temperature 55.0 - 160 °C		44.4 µin/in-°F
@Thickness 0.0787 in,
Temperature 131 - 320 °F		ISO 11359-1/-2
 82.0 µm/m-°C
@Thickness 4.00 mm,
Temperature 55.0 - 160 °C		45.6 µin/in-°F
@Thickness 0.157 in,
Temperature 131 - 320 °F		ISO 11359-1/-2
 90.0 µm/m-°C
@Thickness 2.00 mm,
Temperature 160 - 260 °C		50.0 µin/in-°F
@Thickness 0.0787 in,
Temperature 320 - 500 °F		ISO 11359-1/-2
 94.0 µm/m-°C
@Thickness 4.00 mm,
Temperature 160 - 260 °C		52.2 µin/in-°F
@Thickness 0.157 in,
Temperature 320 - 500 °F		ISO 11359-1/-2
Melting Point 335 °C635 °FASTM D 3418
 335 °C635 °F10°C/min; ISO 11357-1/-3
Deflection Temperature at 1.8 MPa (264 psi) 271 °C520 °FASTM D 648
 280 °C536 °FISO 75-1/-2
Glass Transition Temp, Tg 120 °C248 °FASTM D 3418
UL RTI, Electrical  240 °C
@Thickness 1.50 mm		464 °F
@Thickness 0.0591 in		UL 746B
 240 °C
@Thickness 0.750 mm		464 °F
@Thickness 0.0295 in		UL 746B
 240 °C
@Thickness 3.00 mm		464 °F
@Thickness 0.118 in		UL 746B
UL RTI, Mechanical with Impact  220 °C
@Thickness 1.50 mm		428 °F
@Thickness 0.0591 in		UL 746B
 220 °C
@Thickness 0.750 mm		428 °F
@Thickness 0.0295 in		UL 746B
 220 °C
@Thickness 3.00 mm		428 °F
@Thickness 0.118 in		UL 746B
UL RTI, Mechanical without Impact  240 °C
@Thickness 1.50 mm		464 °F
@Thickness 0.0591 in		UL 746B
 240 °C
@Thickness 0.750 mm		464 °F
@Thickness 0.0295 in		UL 746B
 240 °C
@Thickness 3.00 mm		464 °F
@Thickness 0.118 in		UL 746B
Flammability, UL94  V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		IEC 60695-11-10
 V-0
@Thickness 0.750 mm		V-0
@Thickness 0.0295 in		IEC 60695-11-10
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		UL94
 V-0
@Thickness 0.750 mm		V-0
@Thickness 0.0295 in		UL94
 V-0
@Thickness 0.400 mm		V-0
@Thickness 0.0157 in		IEC 60695-11-10
 V-0
@Thickness 0.400 mm		V-0
@Thickness 0.0157 in		UL94
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		IEC 60695-11-10
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		UL94
Glow Wire Test  800 °C
@Thickness 0.700 mm		1470 °F
@Thickness 0.0276 in		Glow Wire Ignition Temperature; IEC 60695-2-13
 800 °C
@Thickness 1.00 mm		1470 °F
@Thickness 0.0394 in		Glow Wire Ignition Temperature; IEC 60695-2-13
 800 °C
@Thickness 2.00 mm		1470 °F
@Thickness 0.0787 in		Glow Wire Ignition Temperature; IEC 60695-2-13
 900 °C
@Thickness 3.00 mm		1650 °F
@Thickness 0.118 in		Glow Wire Ignition Temperature; IEC 60695-2-13
 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		Glow Wire Flammability Index; IEC 60695-2-12
 960 °C
@Thickness 2.00 mm		1760 °F
@Thickness 0.0787 in		Glow Wire Flammability Index; IEC 60695-2-12
 960 °C
@Thickness 0.700 mm		1760 °F
@Thickness 0.0276 in		Glow Wire Flammability Index; IEC 60695-2-12
 960 °C
@Thickness 1.00 mm		1760 °F
@Thickness 0.0394 in		Glow Wire Flammability Index; IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 355 °C671 °FOptimum
 350 - 360 °C662 - 680 °F
Mold Temperature 80.0 °C176 °FOptimum
 40.0 - 150 °C104 - 302 °F
Drying Temperature 150 °C302 °F
Dry Time 3 hour3 hourDehumidified Dryer
Moisture Content <= 0.010 %<= 0.010 %
 
Descriptive Properties
AdditiveLubricant
ColorBlack
Drying RecommendedYes
FeaturesAppearance, Pleasing Surface
 Arc Resistant
 Aromatic
 Chemical Resistance, Good
 Dimensional Stability, Good
 Flow, Good
 Heat Aging Resistance, Good
 Lubricated
 Moisture Absorption, Low
 Platable
FillerGlass fiber reinforcement
Flame Retardant - Halogen/Red Phosphorus FreeYes
FormsPellets
GenericLCP
Part Marking Code>LCP-GF40<ISO 11469
Polymer FamilyLCP
Polymer TypeLCP
ProcessingInjection Moldable
Processing MethodInjection Molding
Product CategoryElectrical Resins
 Flame Retardant Resins
 Glass Reinforced Resins
Region AvailableAmericas
 Asia/Pacific
 Europe
Resin IdentificationLCP-GF40ISO 1043
UsesAutomotive Applications
 Automotive Electronics
 Automotive, Under the Hood
 Communication Applications
 Computer Components
 Connectors
 Electrical/Electronic Applications
 Parts, Engineering
 Parts, Thin-walled
 Printer Parts

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-31750.html

免责声明: 本文 Celanese Zenite® 6140L BK010 LCP 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4