- 缺口冲击强度: 0.588
- 弯曲模量 [MPa]: 18.3447
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.74 g/cc | 1.74 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.00050 cm/cm | 0.00050 in/in | |
| Linear Mold Shrinkage, Transverse | 0.0050 cm/cm | 0.0050 in/in | |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength | 135.378 MPa | 19635.0 psi | ASTM D638 |
| Elongation at Break | 0.90 % | 0.90 % | ASTM D638 |
| Flexural Strength | 191.3 MPa | 27750 psi | ASTM D790 |
| Flexural Modulus | 18.3447 GPa | 2660.68 ksi | ASTM D790 |
| Izod Impact, Notched | 0.588 J/cm | 1.10 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | ASTM D257 |
| Dielectric Constant | 4.3 @Frequency 1.00e+6 Hz | 4.3 @Frequency 1.00e+6 Hz | ASTM D150 |
| Dielectric Strength | 21.0 kV/mm @Thickness 1.60 mm | 533 kV/in @Thickness 0.0630 in | ASTM D149 |
| Dissipation Factor | 0.025 @Frequency 1.00e+6 Hz | 0.025 @Frequency 1.00e+6 Hz | ASTM D150 |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 352 °C | 666 °F | ASTM D789 |
| Deflection Temperature at 1.8 MPa (264 psi) | 295 °C | 563 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 360 - 370 °C | 680 - 698 °F | |
| Mold Temperature | 30.0 - 160 °C | 86.0 - 320 °F | |