- 吸水率 [%]: 0.27
- 缺口冲击强度: 0.363
- 弯曲强度 [MPa]: 39.3
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Absorption | 0.27 % | 0.27 % | in 24 hours. |
| Viscosity Measurement | 470 | 470 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 80 | 80 | |
| Tensile Strength, Ultimate | 39.3 MPa | 5700 psi | |
| Elongation at Break | 8.0 % | 8.0 % | |
| Flexural Strength | 59.98 MPa | 8699 psi | |
| Izod Impact, Notched | 0.363 J/cm | 0.680 ft-lb/in | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | <= 1.00e+9 ohm-cm @Temperature 93.3 °C | <= 1.00e+9 ohm-cm @Temperature 200 °F | |
| 5.20e+10 ohm-cm @Temperature 65.6 °C | 5.20e+10 ohm-cm @Temperature 150 °F | ||
| 8.80e+14 ohm-cm @Temperature 25.0 °C | 8.80e+14 ohm-cm @Temperature 77.0 °F | ||
| Dielectric Constant | 3.54 @Frequency 1e+6 Hz | 3.54 @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.012 @Frequency 1e+6 Hz | 0.012 @Frequency 1e+6 Hz | |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 50.0 °C | 122 °F | Deflection temperature; load unknown. |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 16 hours; Postcure: 2 hours/100°C (212°F) |