Abatron AboCast/AboCure 8109-13

Abatron AboCast/AboCure 8109-13 物性表: Abatron AboCast/AboCure 8109-13物性表及特性介绍,Abatron AboCast/AboCure 8109-13注塑参数详情,如需Abatron AboCast/AboCure 8109-13下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.18
  • 吸水率 [%]: 0.3
  • 断裂伸长率 [%]: 137.9
  • 弯曲强度 [MPa]: 68.95
 
Physical PropertiesMetricEnglishComments
Density 1.18 g/cc0.0426 lb/in³
Water Absorption 0.30 - 0.40 %0.30 - 0.40 %(60x10X4 mm bar) after 1 hour at 100°C (212°F)
 0.40 - 0.50 %0.40 - 0.50 %(60x10X4 mm bar) after 10 days at 20°C (77°F)
Viscosity  1000 - 2000 cP
@Temperature 40.0 °C
1000 - 2000 cP
@Temperature 104 °F
 10000 - 15000 cP
@Temperature 21.0 °C
10000 - 15000 cP
@Temperature 69.8 °F
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 68.95 MPa10000 psi
Modulus of Elasticity 3.447 GPa500.0 ksi
Flexural Yield Strength 137.9 MPa20000 psi
Compressive Yield Strength 151.7 MPa22000 psi
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity >= 1.50e+16 ohm-cm>= 1.50e+16 ohm-cm
Dielectric Constant  3.9 - 4.4
@Frequency 1e+6 Hz
3.9 - 4.4
@Frequency 1e+6 Hz
 4.2 - 4.5
@Frequency 50 Hz
4.2 - 4.5
@Frequency 50 Hz
Dielectric Strength 15.7 - 17.7 kV/mm
@Thickness 3.17 mm
400 - 450 kV/in
@Thickness 0.125 in
Short time value
 
Thermal PropertiesMetricEnglishComments
CTE, linear 50.0 - 55.0 µm/m-°C
@Temperature 20.0 °C
27.8 - 30.6 µin/in-°F
@Temperature 68.0 °F
Maximum Service Temperature, Air 150 °C302 °FDeflection temperature; load unknown.
 
Processing PropertiesMetricEnglishComments
Processing Temperature 25.0 °C77.0 °F
Pot Life 30 - 60 min30 - 60 minat 60°C (140°F)v
 60 - 180 min60 - 180 minat 40°C (104°F)
 180 - 300 min180 - 300 minat 20°C (68°F)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-32372.html

免责声明: 本文 Abatron AboCast/AboCure 8109-13 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4