Abatron AboCast/AboCure 8109-4

Abatron AboCast/AboCure 8109-4 物性表: Abatron AboCast/AboCure 8109-4物性表及特性介绍,Abatron AboCast/AboCure 8109-4注塑参数详情,如需Abatron AboCast/AboCure 8109-4下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.17
  • 吸水率 [%]: 0.6
  • 断裂伸长率 [%]: 89.63
  • 弯曲强度 [MPa]: 62.05
 
Physical PropertiesMetricEnglishComments
Density 1.17 g/cc0.0423 lb/in³
Water Absorption 0.60 - 0.70 %0.60 - 0.70 %(60x10X4 mm bar) after 10 days at 20°C (77°F)
 1.0 - 1.1 %1.0 - 1.1 %(60x10X4 mm bar) after 1 hour at 100°C (212°F)
Viscosity 2000 - 2600 cP2000 - 2600 cP
Vapor Pressure <= 0.0000133 bar<= 0.0100 torrAboCure, at 20°C
 <= 0.00133 bar<= 1.00 torrAboCast, at 100°C
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Ultimate 62.05 MPa9000 psi
Modulus of Elasticity 3.102 GPa449.9 ksi
Flexural Yield Strength 89.63 MPa13000 psi
Compressive Yield Strength 82.74 MPa12000 psi
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity >= 1.50e+16 ohm-cm>= 1.50e+16 ohm-cm
Dielectric Constant  3.6 - 3.9
@Frequency 1e+6 Hz
3.6 - 3.9
@Frequency 1e+6 Hz
 4.0 - 4.1
@Frequency 50 Hz
4.0 - 4.1
@Frequency 50 Hz
Dissipation Factor 0.010 - 0.0200.010 - 0.020
 0.015 - 0.025
@Frequency 1e+6 Hz
0.015 - 0.025
@Frequency 1e+6 Hz
 
Thermal PropertiesMetricEnglishComments
CTE, linear 95.0 - 100 µm/m-°C
@Temperature 20.0 °C
52.8 - 55.6 µin/in-°F
@Temperature 68.0 °F
Maximum Service Temperature, Air 55.0 °C131 °FDeflection temperature; load unknown.
 
Processing PropertiesMetricEnglishComments
Processing Temperature 25.0 °C77.0 °F
Pot Life 150 min150 minat 20°C (68°F), 30 min/40°C (105°F), 15 min/60°C (140°F)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-32375.html

免责声明: 本文 Abatron AboCast/AboCure 8109-4 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4