CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material物性表参数

CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material

CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material 物性表: CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material物性表及特性介绍,CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material注塑参数详情,如需CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material下载, 可到相关下载区下载

密度 [g/cm3]: 1.7
弯曲模量 [MPa]: 8.20

Physical Properties	Metric	English	Comments

Density	1.700 g/cc	0.06140 lb/in³
Porosity	20 %	20 %	Total porosity (by volume)

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	80	80
Flexural Strength	22.01 MPa	3192 psi
Flexural Modulus	8.20 GPa	1190 ksi
Impact	3.2	3.2	Unspecified Impact Strength Test (kJ/m²)

Thermal Properties	Metric	English	Comments
CTE, linear	25.2 - 28.8 µm/m-°C @Temperature 25.0 - 125 °C	14.0 - 16.0 µin/in-°F @Temperature 77.0 - 257 °F
Thermal Conductivity	1.60 W/m-K @Temperature 100 °C	11.1 BTU-in/hr-ft²-°F @Temperature 212 °F
Maximum Service Temperature, Air	65.6 °C	150 °F	Martens Dimensional Stability

Descriptive Properties
Color	White

关键词:
环氧树脂
供应
CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-32761.html

免责声明: 本文 CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络