DuPont™ Nomex® E56 Paper, 7 mil Nominal Thickness

DuPont™ Nomex® E56 Paper, 7 mil Nominal Thickness 物性表: DuPont™ Nomex® E56 Paper, 7 mil Nominal Thickness物性表及特性介绍,DuPont™ Nomex® E56 Paper, 7 mil Nominal Thickness注塑参数详情,如需DuPont™ Nomex® E56 Paper, 7 mil Nominal Thickness下载, 可到相关下载区下载
  • 密度 [g/cm3]: 0.68
 
Physical PropertiesMetricEnglishComments
Bulk Density 0.680 g/cc0.0246 lb/in³
Density 0.680 g/cc0.0246 lb/in³
Thickness 175 microns6.90 milTypical; ASTM D374
 178 microns7.00 milNominal
 
Mechanical PropertiesMetricEnglishComments
Film Elongation at Break, MD 10.8 %10.8 %ASTM D828
Film Elongation at Break, TD 12 %12 %ASTM D828
Tear Strength, Total 17.0 N3.82 lb (f)Initial in TD; ASTM D1004
 38.0 N8.54 lb (f)Initial in MD; ASTM D1004
Film Tensile Strength at Break, MD 63.9 MPa9270 psiCalculated from mfr's report of 112 N/cm per ASTM D828 and the typical thickness
Film Tensile Strength at Break, TD 28.0 MPa4060 psiCalculated from mfr's report of 49 N/cm per ASTM D828 and the typical thickness
 
Electrical PropertiesMetricEnglishComments
Dielectric Constant 2.1
@Frequency 60 Hz
2.1
@Frequency 60 Hz
ASTM D150
Dielectric Strength 18.0 kV/mm457 kV/inAC Rapid Rise; ASTM D149
 36.4 kV/mm925 kV/inFull-wave Impulse; ASTM D3426
Dissipation Factor 0.0060
@Frequency 60 Hz
0.0060
@Frequency 60 Hz
ASTM D150
 
Thermal PropertiesMetricEnglishComments
Thermal Conductivity 0.0830 W/m-K
@Temperature 150 °C
0.576 BTU-in/hr-ft²-°F
@Temperature 302 °F
measured on 10 mil sample
Maximum Service Temperature, Air 220 °C428 °F220°C insulation by UL

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-33246.html

免责声明: 本文 DuPont™ Nomex® E56 Paper, 7 mil Nominal Thickness 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4