- 吸水率 [%]: 0.3
- 缺口冲击强度: 6.41
- 拉伸强度 [MPa]: 86.2
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.70 g/cc | 1.70 g/cc | ASTM D-792 | ||
| Water Absorption | 0.30 % | 0.30 % | % by wt.; ASTM D-570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Yield | 86.2 MPa | 12500 psi | ASTM D-638 | ||
| Tensile Modulus | 11.7 GPa | 1700 ksi | ASTM D-638 | ||
| Flexural Strength | 200 MPa | 29000 psi | ASTM D-790 | ||
| Compressive Strength | 248 MPa | 36000 psi | ASTM D-695 | ||
| Shear Strength | 76.5 MPa | 11100 psi | ASTM D-732 | ||
| Izod Impact, Notched | 6.41 J/cm | 12.0 ft-lb/in | ASTM D-256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Insulation Resistance | 1.45e+14 ohm | 1.45e+14 ohm | ASTM D-257 | ||
| Dielectric Constant | 3.7 @Frequency 1e+6 Hz | 3.7 @Frequency 1e+6 Hz | ASTM D-150 | ||
| 4.6 @Frequency 60 Hz | 4.6 @Frequency 60 Hz | ASTM D-150 | |||
| Dielectric Strength | 19.6 kV/mm | 498 kV/in | Perpendicular S/T in Air; ASTM D-149 | ||
| 24.6 kV/mm | 625 kV/in | Perpendicular S/T in Oil; ASTM D-149 | |||
| Dissipation Factor | 0.013 @Frequency 1e+6 Hz | 0.013 @Frequency 1e+6 Hz | ASTM D-150 | ||
| 0.037 @Frequency 60 Hz | 0.037 @Frequency 60 Hz | ASTM D-150 | |||
| Arc Resistance | 120 sec | 120 sec | ASTM D-495 | ||
| 180 sec | 180 sec | Post-cured; ASTM D-495 | |||
| Comparative Tracking Index | >= 500 V | >= 500 V | UL 746A | ||
| Hot Wire Ignition, HWI | 35 sec @Thickness 0.711 mm | 35 sec @Thickness 0.0280 in | UL 746A | ||
| 39 sec @Thickness 1.47 mm | 39 sec @Thickness 0.0580 in | UL 746A | |||
| High Amp Arc Ignition, HAI | >= 200 arcs | >= 200 arcs | #Exposure; UL 746A | ||
| High Voltage Arc-Tracking Rate, HVTR | 0.000 mm/min | 0.000 in/min | UL 746A | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 20.0 µm/m-°C @Temperature 20.0 °C | 11.1 µin/in-°F @Temperature 68.0 °F | ASTM D-696 | ||
| Thermal Conductivity | 0.250 W/m-K | 1.74 BTU-in/hr-ft²-°F | ASTM C-177 | ||
| UL RTI, Electrical | 210 °C | 410 °F | UL 746B | ||
| UL RTI, Mechanical without Impact | 210 °C | 410 °F | UL 746B | ||
| Flammability, UL94 | HB | HB | |||
| Oxygen Index | 21.8 % | 21.8 % | ASTM D-2863 | ||
| Descriptive Properties | |||||
| Electric Strength kV, ASTM D149 | 50 | Parallel S/S in Oil | |||
| Standard Color | Natural/Tan | ||||
| UL Recognition File Number | E81928 | ||||