- 密度 [g/cm3]: 1.32
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.32 g/cc | 0.0477 lb/in³ | Side 1 Uncured Silicone Property; Arlon SQA-TMS-024 | ||
1.32 g/cc | 0.0477 lb/in³ | Side 2 Silicone Property; Arlon SQA-TMS-024 | |||
1.56 g/cc | 0.0564 lb/in³ | Side 1 Cured Silicone Property; Arlon SQA-TMS-024 | |||
Thickness | 25.4 microns | 1.00 mil | Side 1 Layer 1; Arlon SQA-TMS-003 | ||
76.2 microns | 3.00 mil | Side 1 Layer 2; Arlon SQA-TMS-003 | |||
76.2 microns | 3.00 mil | Side 2; Arlon SQA-TMS-003 | |||
203 microns | 8.00 mil | Substrate; Arlon SQA-TMS-003 | |||
381 microns | 15.0 mil | Overall Thickness; Arlon SQA-TMS-003 | |||
Mechanical Properties | Metric | English | Comments | ||
Hardness, Shore A | 37 | 37 | Side 1 Uncured Silicone Property; ASTM D2240 | ||
37 | 37 | Side 2 Silicone Property; ASTM D2240 | |||
50 | 50 | Side 1 Cured Silicone Property; ASTM D2240 | |||
Tensile Strength | 2.90 MPa | 420 psi | Side 1 Cured Silicone Property; ASTM D412 | ||
6.55 MPa | 950 psi | Side 1 Uncured Silicone Property; ASTM D412 | |||
6.55 MPa | 950 psi | Side 2 Silicone Property; ASTM D412 | |||
Elongation at Break | 500 % | 500 % | Side 1 Cured Silicone Property; ASTM D412 | ||
670 % | 670 % | Side 1 Uncured Silicone Property; ASTM D412 | |||
670 % | 670 % | Side 2 Silicone Property; ASTM D412 | |||
Tear Strength | 9.64 kN/m | 55.0 pli | Side 1 Cured Silicone Property; ASTM D624 | ||
26.3 kN/m | 150 pli | Side 1 Uncured Silicone Property; ASTM D624 | |||
26.3 kN/m | 150 pli | Side 2 Silicone Property; ASTM D624 | |||
Peel Strength | 1.23 kN/m | 7.00 pli | Bond Strength; Arlon SQA-TMS-011 | ||
Electrical Properties | Metric | English | Comments | ||
Dielectric Strength | 35.4 kV/mm | 900 kV/in | ASTM D149 | ||
Thermal Properties | Metric | English | Comments | ||
Maximum Service Temperature, Inert | 232 °C | 450 °F | |||
Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |||
Processing Properties | Metric | English | Comments | ||
Cure Time | 120 min @Temperature 204 °C | 2.00 hour @Temperature 400 °F | Recommended Post Cure Cycle | ||
15.0 min @Pressure 0.345 MPa, Temperature 121 °C | 0.250 hour @Pressure 50.0 psi, Temperature 250 °F | Recommended Cure Cycle | |||
Shelf Life | 6.00 Month @Temperature 21.1 °C | 6.00 Month @Temperature 70.0 °F | |||
Descriptive Properties | |||||
Color | Red | ||||
Total Product Weight (oz/yd2) | 16.9 | Arlon SQA-TMS-025 |