- 密度 [g/cm3]: 1.61
- 吸水率 [%]: 0.2
- 弯曲强度 [MPa]: 45.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.61 g/cc | 0.0582 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.680 g/cc | 0.0246 lb/in³ | ASTM D1895 |
| Water Absorption | 0.20 % | 0.20 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 45.0 MPa | 6530 psi | ASTM D638 |
| Tensile Modulus | 10.3 GPa | 1490 ksi | ASTM D638 |
| Flexural Strength | 69.0 MPa | 10000 psi | |
| Compressive Strength | 158 MPa | 22900 psi | ASTM D695 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | ASTM D257 |
| Dielectric Constant | 4.9 @Frequency 1e+6 Hz | 4.9 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 12.8 kV/mm | 325 kV/in | Step by step; ASTM D149 |
| 16.7 kV/mm | 424 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.040 @Frequency 1e+6 Hz | 0.040 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 180 sec | 180 sec | ASTM D495 |
| Comparative Tracking Index | 220 V | 220 V | IEC Tracking Index |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 160 °C @Thickness 3.0 mm | 320 °F @Thickness 0.12 in | UL Temperature Index |
| Deflection Temperature at 1.8 MPa (264 psi) | 204 °C | 399 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 0.510 mm | V-0 @Thickness 0.0201 in | |
| V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | ||
| 5VA @Thickness 3.30 mm | 5VA @Thickness 0.130 in | ||