- 密度 [g/cm3]: 1.38
- 吸水率 [%]: 0.6
- 缺口冲击强度: 1.03
- 弯曲强度 [MPa]: 41.0
- 弯曲模量 [MPa]: 9.00
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.300 g/cc | 0.0108 lb/in³ | Powder; ASTM D1895 | ||
| Density | 1.38 g/cc | 0.0499 lb/in³ | ASTM D-792 | ||
| Water Absorption | 0.60 % | 0.60 % | 24 hour; ASTM D570 | ||
| 2.2 % | 2.2 % | 48 hour; ASTM D570 | |||
| Linear Mold Shrinkage | 0.0030 cm/cm | 0.0030 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell E | 105 | 105 | ASTM D785 | ||
| Tensile Strength, Ultimate | 41.0 MPa | 5950 psi | ASTM D638 | ||
| Flexural Strength | 86.0 MPa | 12500 psi | ASTM D790 | ||
| Flexural Modulus | 9.00 GPa | 1310 ksi | ASTM D790 | ||
| Compressive Strength | 165 MPa | 23900 psi | ASTM D695 | ||
| Izod Impact, Notched | 1.03 J/cm | 1.93 ft-lb/in | ASTM D256A | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 3.10 kV/mm | 78.7 kV/in | 60 Hz, wet, SS; ASTM D149 | ||
| 5.50 kV/mm | 140 kV/in | ST; ASTM D149 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 20.0 µm/m-°C @Temperature 20.0 °C | 11.1 µin/in-°F @Temperature 68.0 °F | ASTM E831 | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | UL Temperature Index; UL 746B | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 180 °C | 356 °F | As Molded; ASTM D648A | ||
| Flammability, UL94 | HB @Thickness 1.60 mm | HB @Thickness 0.0630 in | |||
| Descriptive Properties | |||||
| Available Molding Grades | Compression, Transfer, Injection | ||||
| Color | Black | ||||
| Form | Pellet | ||||