- 密度 [g/cm3]: 1.58
- 吸水率 [%]: 0.37
- 缺口冲击强度: 0.195
- 弯曲强度 [MPa]: 65.0
- 弯曲模量 [MPa]: 8.50
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.570 g/cc | 0.0206 lb/in³ | ASTM D1895 |
| Density | 1.58 g/cc | 0.0571 lb/in³ | ASTM D792 |
| Water Absorption | 0.37 % | 0.37 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0076 cm/cm | 0.0076 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 72 | 72 | ASTM D785 |
| Tensile Strength, Ultimate | 65.0 MPa | 9430 psi | ASTM D638 |
| Elongation at Break | 0.87 % | 0.87 % | ASTM D638 |
| Tensile Modulus | 10.3 GPa | 1490 ksi | ASTM D638 |
| Flexural Strength | 93.0 MPa | 13500 psi | ASTM D790 |
| Flexural Modulus | 8.50 GPa | 1230 ksi | ASTM D790 |
| Compressive Strength | 161 MPa | 23400 psi | ASTM D695 |
| Izod Impact, Notched | 0.195 J/cm | 0.365 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.206 J/cm² | 0.980 ft-lb/in² | ASTM D256 |
| Impact | 120 | 120 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.40e+12 ohm-cm | 1.40e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 7.2 | 7.2 | ASTM D150 |
| Dielectric Strength | 4.80 kV/mm | 122 kV/in | Step by Step; ASTM D149 |
| 7.50 kV/mm | 191 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.080 | 0.080 | ASTM D150 |
| Arc Resistance | 180 sec | 180 sec | ASTM D495 |
| Comparative Tracking Index | 525 V | 525 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 149 °C | 300 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 178 °C | 352 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.50 mm | V-0 @Thickness 0.0591 in | |
| Shrinkage | 1.08 % | 1.08 % | 240 hr, 105ºC; ASTM D1299 |