- 密度 [g/cm3]: 1.43
- 吸水率 [%]: 0.45
- 缺口冲击强度: 0.226
- 弯曲强度 [MPa]: 56.0
- 弯曲模量 [MPa]: 7.70
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.580 g/cc | 0.0210 lb/in³ | ASTM D1895 |
| Density | 1.43 g/cc | 0.0517 lb/in³ | ASTM D792 |
| Water Absorption | 0.45 % | 0.45 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0044 cm/cm | 0.0044 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 75 | 75 | ASTM D785 |
| Tensile Strength, Ultimate | 56.0 MPa | 8120 psi | ASTM D638 |
| Elongation at Break | 0.89 % | 0.89 % | ASTM D638 |
| Tensile Modulus | 8.30 GPa | 1200 ksi | ASTM D638 |
| Flexural Strength | 83.0 MPa | 12000 psi | ASTM D790 |
| Flexural Modulus | 7.70 GPa | 1120 ksi | ASTM D790 |
| Compressive Strength | 155 MPa | 22500 psi | ASTM D695 |
| Izod Impact, Notched | 0.226 J/cm | 0.423 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.224 J/cm² | 1.07 ft-lb/in² | ASTM D256 |
| Impact | 150 | 150 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 2.10e+12 ohm-cm | 2.10e+12 ohm-cm | ASTM D247 |
| Dielectric Constant | 4.5 | 4.5 | ASTM D150 |
| Dielectric Strength | 16.2 kV/mm | 411 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.040 | 0.040 | ASTM D150 |
| Arc Resistance | 57 sec | 57 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 99.0 µm/m-°C @Temperature 40.0 - 130 °C | 55.0 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Thermal Conductivity | 0.370 W/m-K @Temperature 100 °C | 2.57 BTU-in/hr-ft²-°F @Temperature 212 °F | ASTM E1461 |
| Maximum Service Temperature, Air | 190 °C | 374 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 160 °C | 320 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.50 mm | HB @Thickness 0.0591 in | |
| Oxygen Index | 25 % | 25 % | ASTM D2863 |
| Shrinkage | 0.143 % | 0.143 % | 72 hr, 120ºC; ASTM D1299 |