- 密度 [g/cm3]: 1.6
- 吸水率 [%]: 0.139
- 缺口冲击强度: 0.196
- 弯曲强度 [MPa]: 60.0
- 弯曲模量 [MPa]: 9.80
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Bulk Density | 0.640 g/cc | 0.0231 lb/in³ | ASTM D1895 |
| Density | 1.60 g/cc | 0.0578 lb/in³ | ASTM D792 |
| Water Absorption | 0.139 % | 0.139 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00298 cm/cm | 0.00298 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell E | 85 | 85 | ASTM D785 |
| Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
| Elongation at Break | 0.80 % | 0.80 % | ASTM D638 |
| Tensile Modulus | 10.9 GPa | 1580 ksi | ASTM D638 |
| Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
| Flexural Modulus | 9.80 GPa | 1420 ksi | ASTM D790 |
| Compressive Strength | 199 MPa | 28900 psi | ASTM D695 |
| Izod Impact, Notched | 0.196 J/cm | 0.367 ft-lb/in | ASTM D256 |
| Charpy Impact, Notched | 0.222 J/cm² | 1.06 ft-lb/in² | ASTM D256 |
| Impact | 130 | 130 | J/m drop Ball Impact; PLENCO |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 4.30e+11 ohm-cm | 4.30e+11 ohm-cm | ASTM D247 |
| Dielectric Constant | 5.3 | 5.3 | ASTM D150 |
| Dielectric Strength | 11.6 kV/mm | 295 kV/in | Step by Step; ASTM D149 |
| 15.6 kV/mm | 396 kV/in | Short Time; ASTM D149 | |
| Dissipation Factor | 0.041 | 0.041 | ASTM D150 |
| Arc Resistance | 159 sec | 159 sec | ASTM D495 |
| Comparative Tracking Index | 175 V | 175 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 47.0 µm/m-°C @Temperature 40.0 - 130 °C | 26.1 µin/in-°F @Temperature 104 - 266 °F | TMA; ASTM E831 |
| Maximum Service Temperature, Air | 203 °C | 397 °F | Heat Resistance; ASTM D570D |
| Deflection Temperature at 1.8 MPa (264 psi) | 193 °C | 379 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 3.00 mm | V-0 @Thickness 0.118 in | |
| Oxygen Index | 38 % | 38 % | ASTM D2863 |
| Shrinkage | 0.125 % | 0.125 % | 72 hr, 120ºC; ASTM D1299 |