- 密度 [g/cm3]: 1.46
- 吸水率 [%]: 0.4
- 缺口冲击强度: 0.21
- 断裂伸长率 [%]: 86.0
- 弯曲强度 [MPa]: 56.0
- 弯曲模量 [MPa]: 6.90
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.46 g/cc | 0.0527 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.500 g/cc | 0.0181 lb/in³ | ASTM D1895 |
| Water Absorption | 0.40 % | 0.40 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0090 cm/cm | 0.0090 in/in | Injection; ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 56.0 MPa | 8120 psi | ASTM D638 |
| Flexural Yield Strength | 86.0 MPa | 12500 psi | ASTM D790 |
| Flexural Modulus | 6.90 GPa | 1000 ksi | ASTM D790 |
| Compressive Yield Strength | 235 MPa | 34100 psi | ASTM D695 |
| Izod Impact, Notched | 0.210 J/cm | 0.393 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 2.20e+10 ohm-cm | 2.20e+10 ohm-cm | ASTM D257 |
| Dielectric Strength | 12.2 kV/mm | 310 kV/in | ASTM D149 |
| Comparative Tracking Index | 180 V | 180 V | UL 746 |