| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 2.20 g/cc | 2.20 g/cc | ASTM D792 | ||
| Deformation | 30 % | 30 % | 49.8 N/cm | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 65 | 65 | ASTM D2240 | ||
| Tensile Strength at Break | 2.24 MPa | 325 psi | ASTM D412 | ||
| Elongation at Break | 65 % | 65 % | ASTM D412 | ||
| Compression Set | 45 % @Temperature 70.0 °C, Time 79200 sec | 45 % @Temperature 158 °F, Time 22.0 hour | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 0.050 ohm-cm | 0.050 ohm-cm | CHO MAT-1009 | ||
| Shielding Effectiveness | >= 60 dB @Frequency 200 - 12000 Hz | >= 60 dB @Frequency 200 - 12000 Hz | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 85.0 °C | 185 °F | |||
| Flammability, UL94 | V-0 | V-0 | |||
| Processing Properties | Metric | English | Comments | ||
| Cure Time | 18.0 min @Temperature 22.0 °C | 0.300 hour @Temperature 71.6 °F | 50% RH; Tack Free Time | ||
| 240 min @Temperature 22.0 °C | 4.00 hour @Temperature 71.6 °F | 50% RH; Handling Time | |||
| 2880 min @Temperature 22.0 °C | 48.0 hour @Temperature 71.6 °F | 50% RH; Full Cure | |||
| Shelf Life | 5.00 Month @Temperature 17.0 - 27.0 °C | 5.00 Month @Temperature 62.6 - 80.6 °F | |||
| Descriptive Properties | |||||
| Adhesion | 9 N/cm | Trivalent Chromate Coating on Aluminum, Chomerics WI 1038 | |||
| Cure System | Moisture | ||||
| Filler | Ni/C | ||||
| Galvanic Corrosion | 10 mg | Resistance Against Aluminum; CHO TM-100 | |||
| Number of Components | 1 | ||||
| Resin System | Silicone | ||||
