塑胶原料之家
  1. 首页
  2. 英文物性
  3. PBT
  4. DuPont Performance Polymers Crastin® LW9030FR NC010 PBT

DuPont Performance Polymers Crastin® LW9030FR NC010 PBT

DuPont Performance Polymers Crastin® LW9030FR NC010 PBT 物性表: DuPont Performance Polymers Crastin® LW9030FR NC010 PBT物性表及特性介绍,DuPont Performance Polymers Crastin® LW9030FR NC010 PBT注塑参数详情,如需DuPont Performance Polymers Crastin® LW9030FR NC010 PBT下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.57
  • 吸水率 [%]: 0.21
  • 缺口冲击强度: 7.0
  • 热变形温度 [℃]: 220.0
 
Physical PropertiesMetricEnglishComments
Density 1.57 g/cc0.0567 lb/in³ISO 1183
Filler Content 30 %30 %
Water Absorption  0.21 %
@Temperature 23.0 °C		0.21 %
@Temperature 73.4 °F		Equilibrium 50%RH; ISO 62, Similar to
 0.72 %
@Temperature 23.0 °C		0.72 %
@Temperature 73.4 °F		Saturation, immersed; ISO 62, Similar to
Viscosity  35000 cP
@Shear Rate 10000 1/s,
Temperature 270 °C		35000 cP
@Shear Rate 10000 1/s,
Temperature 518 °F		ISO 11443
 43000 cP
@Shear Rate 10000 1/s,
Temperature 260 °C		43000 cP
@Shear Rate 10000 1/s,
Temperature 500 °F		ISO 11443
 54000 cP
@Shear Rate 10000 1/s,
Temperature 250 °C		54000 cP
@Shear Rate 10000 1/s,
Temperature 482 °F		ISO 11443
 55000 cP
@Shear Rate 5000 1/s,
Temperature 270 °C		55000 cP
@Shear Rate 5000 1/s,
Temperature 518 °F		ISO 11443
 68000 cP
@Shear Rate 5000 1/s,
Temperature 260 °C		68000 cP
@Shear Rate 5000 1/s,
Temperature 500 °F		ISO 11443
 86000 cP
@Shear Rate 5000 1/s,
Temperature 250 °C		86000 cP
@Shear Rate 5000 1/s,
Temperature 482 °F		ISO 11443
 99000 cP
@Shear Rate 2000 1/s,
Temperature 270 °C		99000 cP
@Shear Rate 2000 1/s,
Temperature 518 °F		ISO 11443
 123000 cP
@Shear Rate 2000 1/s,
Temperature 260 °C		123000 cP
@Shear Rate 2000 1/s,
Temperature 500 °F		ISO 11443
 152000 cP
@Shear Rate 1000 1/s,
Temperature 270 °C		152000 cP
@Shear Rate 1000 1/s,
Temperature 518 °F		ISO 11443
 157000 cP
@Shear Rate 2000 1/s,
Temperature 250 °C		157000 cP
@Shear Rate 2000 1/s,
Temperature 482 °F		ISO 11443
 192000 cP
@Shear Rate 1000 1/s,
Temperature 260 °C		192000 cP
@Shear Rate 1000 1/s,
Temperature 500 °F		ISO 11443
 230000 cP
@Shear Rate 500 1/s,
Temperature 270 °C		230000 cP
@Shear Rate 500 1/s,
Temperature 518 °F		ISO 11443
 245000 cP
@Shear Rate 1000 1/s,
Temperature 250 °C		245000 cP
@Shear Rate 1000 1/s,
Temperature 482 °F		ISO 11443
 295000 cP
@Shear Rate 500 1/s,
Temperature 260 °C		295000 cP
@Shear Rate 500 1/s,
Temperature 500 °F		ISO 11443
 382000 cP
@Shear Rate 500 1/s,
Temperature 250 °C		382000 cP
@Shear Rate 500 1/s,
Temperature 482 °F		ISO 11443
 501000 cP
@Shear Rate 100 1/s,
Temperature 270 °C		501000 cP
@Shear Rate 100 1/s,
Temperature 518 °F		ISO 11443
 713000 cP
@Shear Rate 100 1/s,
Temperature 260 °C		713000 cP
@Shear Rate 100 1/s,
Temperature 500 °F		ISO 11443
 998000 cP
@Shear Rate 100 1/s,
Temperature 250 °C		998000 cP
@Shear Rate 100 1/s,
Temperature 482 °F		ISO 11443
Linear Mold Shrinkage, Flow 0.0040 cm/cm0.0040 in/inParallel; Annealed; ISO 294-4
 0.0030 cm/cm
@Thickness 2.00 mm		0.0030 in/in
@Thickness 0.0787 in		Parallel; ISO 294-4
Linear Mold Shrinkage, Transverse 0.010 cm/cm0.010 in/inNormal; Annealed; ISO 294-4
 0.0075 cm/cm
@Thickness 2.00 mm		0.0075 in/in
@Thickness 0.0787 in		Normal; ISO 294-4
Melt Index of Compound 10 g/10 min
@Load 5.00 kg,
Temperature 250 °C		10 g/10 min
@Load 11.0 lb,
Temperature 482 °F		cm3/10 min; ISO 1133
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 125 MPa
@Temperature 23.0 °C		18100 psi
@Temperature 73.4 °F		ISO 527
Tensile Stress  16.57 MPa
@Strain 0.780 %,
Temperature 120 °C		2403 psi
@Strain 0.780 %,
Temperature 248 °F		ISO 527
 17.56 MPa
@Strain 0.270 %,
Temperature 60.0 °C		2547 psi
@Strain 0.270 %,
Temperature 140 °F		ISO 527
 17.76 MPa
@Strain 0.170 %,
Temperature 23.0 °C		2576 psi
@Strain 0.170 %,
Temperature 73.4 °F		ISO 527
 18.04 MPa
@Strain 0.220 %,
Temperature 40.0 °C		2616 psi
@Strain 0.220 %,
Temperature 104 °F		ISO 527
 21.9 MPa
@Strain 1.45 %,
Temperature 120 °C		3180 psi
@Strain 1.45 %,
Temperature 248 °F		ISO 527
 21.95 MPa
@Strain 0.370 %,
Temperature 90.0 °C		3184 psi
@Strain 0.370 %,
Temperature 194 °F		ISO 527
 25.11 MPa
@Strain 2.20 %,
Temperature 120 °C		3642 psi
@Strain 2.20 %,
Temperature 248 °F		ISO 527
 26.97 MPa
@Strain 2.87 %,
Temperature 120 °C		3912 psi
@Strain 2.87 %,
Temperature 248 °F		ISO 527
 28.43 MPa
@Strain 3.62 %,
Temperature 120 °C		4123 psi
@Strain 3.62 %,
Temperature 248 °F		ISO 527
 29.39 MPa
@Strain 4.29 %,
Temperature 120 °C		4263 psi
@Strain 4.29 %,
Temperature 248 °F		ISO 527
 30.13 MPa
@Strain 5.03 %,
Temperature 120 °C		4370 psi
@Strain 5.03 %,
Temperature 248 °F		ISO 527
 30.65 MPa
@Strain 5.70 %,
Temperature 120 °C		4445 psi
@Strain 5.70 %,
Temperature 248 °F		ISO 527
 31.02 MPa
@Strain 6.45 %,
Temperature 120 °C		4499 psi
@Strain 6.45 %,
Temperature 248 °F		ISO 527
 31.16 MPa
@Strain 7.12 %,
Temperature 120 °C		4519 psi
@Strain 7.12 %,
Temperature 248 °F		ISO 527
 34.27 MPa
@Strain 0.530 %,
Temperature 60.0 °C		4970 psi
@Strain 0.530 %,
Temperature 140 °F		ISO 527
 34.4 MPa
@Strain 0.340 %,
Temperature 23.0 °C		4990 psi
@Strain 0.340 %,
Temperature 73.4 °F		ISO 527
 34.89 MPa
@Strain 0.650 %,
Temperature 90.0 °C		5060 psi
@Strain 0.650 %,
Temperature 194 °F		ISO 527
 35.23 MPa
@Strain 0.440 %,
Temperature 40.0 °C		5110 psi
@Strain 0.440 %,
Temperature 104 °F		ISO 527
 45.73 MPa
@Strain 0.990 %,
Temperature 90.0 °C		6633 psi
@Strain 0.990 %,
Temperature 194 °F		ISO 527
 47.56 MPa
@Strain 0.780 %,
Temperature 60.0 °C		6898 psi
@Strain 0.780 %,
Temperature 140 °F		ISO 527
 50.16 MPa
@Strain 0.650 %,
Temperature 40.0 °C		7275 psi
@Strain 0.650 %,
Temperature 104 °F		ISO 527
 51.23 MPa
@Strain 0.520 %,
Temperature 23.0 °C		7430 psi
@Strain 0.520 %,
Temperature 73.4 °F		ISO 527
 52.67 MPa
@Strain 1.33 %,
Temperature 90.0 °C		7639 psi
@Strain 1.33 %,
Temperature 194 °F		ISO 527
 56.44 MPa
@Strain 1.61 %,
Temperature 90.0 °C		8186 psi
@Strain 1.61 %,
Temperature 194 °F		ISO 527
 59.48 MPa
@Strain 1.95 %,
Temperature 90.0 °C		8627 psi
@Strain 1.95 %,
Temperature 194 °F		ISO 527
 59.57 MPa
@Strain 1.07 %,
Temperature 60.0 °C		8640 psi
@Strain 1.07 %,
Temperature 140 °F		ISO 527
 61.44 MPa
@Strain 2.28 %,
Temperature 90.0 °C		8911 psi
@Strain 2.28 %,
Temperature 194 °F		ISO 527
 62.51 MPa
@Strain 2.57 %,
Temperature 90.0 °C		9066 psi
@Strain 2.57 %,
Temperature 194 °F		ISO 527
 63.28 MPa
@Strain 0.860 %,
Temperature 40.0 °C		9178 psi
@Strain 0.860 %,
Temperature 104 °F		ISO 527
 63.41 MPa
@Strain 2.91 %,
Temperature 90.0 °C		9197 psi
@Strain 2.91 %,
Temperature 194 °F		ISO 527
 63.71 MPa
@Strain 3.24 %,
Temperature 90.0 °C		9240 psi
@Strain 3.24 %,
Temperature 194 °F		ISO 527
 64.93 MPa
@Strain 0.690 %,
Temperature 23.0 °C		9417 psi
@Strain 0.690 %,
Temperature 73.4 °F		ISO 527
 67.41 MPa
@Strain 1.32 %,
Temperature 60.0 °C		9777 psi
@Strain 1.32 %,
Temperature 140 °F		ISO 527
 73.26 MPa
@Strain 1.58 %,
Temperature 60.0 °C		10630 psi
@Strain 1.58 %,
Temperature 140 °F		ISO 527
 74.31 MPa
@Strain 1.07 %,
Temperature 40.0 °C		10780 psi
@Strain 1.07 %,
Temperature 104 °F		ISO 527
 77.52 MPa
@Strain 0.850 %,
Temperature 23.0 °C		11240 psi
@Strain 0.850 %,
Temperature 73.4 °F		ISO 527
 77.67 MPa
@Strain 1.83 %,
Temperature 60.0 °C		11270 psi
@Strain 1.83 %,
Temperature 140 °F		ISO 527
 80.54 MPa
@Strain 2.09 %,
Temperature 60.0 °C		11680 psi
@Strain 2.09 %,
Temperature 140 °F		ISO 527
 82.37 MPa
@Strain 2.34 %,
Temperature 60.0 °C		11950 psi
@Strain 2.34 %,
Temperature 140 °F		ISO 527
 83.2 MPa
@Strain 1.28 %,
Temperature 40.0 °C		12100 psi
@Strain 1.28 %,
Temperature 104 °F		ISO 527
 83.53 MPa
@Strain 2.63 %,
Temperature 60.0 °C		12120 psi
@Strain 2.63 %,
Temperature 140 °F		ISO 527
 88.44 MPa
@Strain 1.02 %,
Temperature 23.0 °C		12830 psi
@Strain 1.02 %,
Temperature 73.4 °F		ISO 527
 90.37 MPa
@Strain 1.49 %,
Temperature 40.0 °C		13110 psi
@Strain 1.49 %,
Temperature 104 °F		ISO 527
 95.85 MPa
@Strain 1.70 %,
Temperature 40.0 °C		13900 psi
@Strain 1.70 %,
Temperature 104 °F		ISO 527
 98.73 MPa
@Strain 1.20 %,
Temperature 23.0 °C		14320 psi
@Strain 1.20 %,
Temperature 73.4 °F		ISO 527
 100.1 MPa
@Strain 1.91 %,
Temperature 40.0 °C		14520 psi
@Strain 1.91 %,
Temperature 104 °F		ISO 527
 102.8 MPa
@Strain 2.12 %,
Temperature 40.0 °C		14910 psi
@Strain 2.12 %,
Temperature 104 °F		ISO 527
 106.3 MPa
@Strain 1.37 %,
Temperature 23.0 °C		15420 psi
@Strain 1.37 %,
Temperature 73.4 °F		ISO 527
 112.6 MPa
@Strain 1.54 %,
Temperature 23.0 °C		16330 psi
@Strain 1.54 %,
Temperature 73.4 °F		ISO 527
 118.2 MPa
@Strain 1.70 %,
Temperature 23.0 °C		17140 psi
@Strain 1.70 %,
Temperature 73.4 °F		ISO 527
Elongation at Break 1.8 %
@Temperature 23.0 °C		1.8 %
@Temperature 73.4 °F		ISO 527
Tensile Modulus  1.856 GPa
@Temperature 150 °C		269.2 ksi
@Temperature 302 °F		DAM; ISO 527
 2.722 GPa
@Temperature 120 °C		394.8 ksi
@Temperature 248 °F		DAM; ISO 527
 6.295 GPa
@Temperature 90.0 °C		913.0 ksi
@Temperature 194 °F		DAM; ISO 527
 7.46 GPa
@Temperature 60.0 °C		1080 ksi
@Temperature 140 °F		DAM; ISO 527
 8.529 GPa
@Temperature 40.0 °C		1237 ksi
@Temperature 104 °F		DAM; ISO 527
 10.5 GPa
@Temperature 23.0 °C		1520 ksi
@Temperature 73.4 °F		ISO 527
 10.793 GPa
@Temperature 0.000 °C		1565.4 ksi
@Temperature 32.0 °F		DAM; ISO 527
 11.243 GPa
@Temperature -20.0 °C		1630.7 ksi
@Temperature -4.00 °F		DAM; ISO 527
Flexural Strength 175 MPa
@Temperature 23.0 °C		25400 psi
@Temperature 73.4 °F		ISO 178
Izod Impact, Notched (ISO)  7.00 kJ/m²
@Temperature -30.0 °C		3.33 ft-lb/in²
@Temperature -22.0 °F		ISO 180/1A
 7.00 kJ/m²
@Temperature 23.0 °C		3.33 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1A
Izod Impact, Unnotched (ISO)  35.0 kJ/m²
@Temperature -30.0 °C		16.7 ft-lb/in²
@Temperature -22.0 °F		ISO 180/1U
 35.0 kJ/m²
@Temperature 23.0 °C		16.7 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1U
Charpy Impact Unnotched  4.00 J/cm²
@Temperature -30.0 °C		19.0 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eU
 4.00 J/cm²
@Temperature 23.0 °C		19.0 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eU
Charpy Impact, Notched  0.800 J/cm²
@Temperature -30.0 °C		3.81 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eA
 0.800 J/cm²
@Temperature 23.0 °C		3.81 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eA
Tensile Creep Modulus, 1 hour 9500 MPa
@Temperature 23.0 °C		1.38e+6 psi
@Temperature 73.4 °F		ISO 899
Tensile Creep Modulus, 1000 hours 7400 MPa
@Temperature 23.0 °C		1.07e+6 psi
@Temperature 73.4 °F		ISO 899
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity >= 1.00e+15 ohm-cm
@Temperature 23.0 °C		>= 1.00e+15 ohm-cm
@Temperature 73.4 °F		IEC 60093
Surface Resistance 1.00e+14 ohm
@Temperature 23.0 °C		1.00e+14 ohm
@Temperature 73.4 °F		IEC 60093
Dielectric Constant  3.6
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		3.6
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		IEC 60250
 3.8
@Frequency 100 Hz,
Temperature 23.0 °C		3.8
@Frequency 100 Hz,
Temperature 73.4 °F		IEC 60250
Dielectric Strength 28.0 kV/mm
@Thickness 1.00 mm,
Temperature 23.0 °C		711 kV/in
@Thickness 0.0394 in,
Temperature 73.4 °F		IEC 60243-1
 20.0 kV/mm
@Thickness 2.00 mm,
Time 20.0 sec		508 kV/in
@Thickness 0.0787 in,
Time 0.00556 hour		IEC 60243-1
Dissipation Factor  0.0030
@Frequency 100 Hz,
Temperature 23.0 °C		0.0030
@Frequency 100 Hz,
Temperature 73.4 °F		IEC 60250
 0.015
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.015
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		IEC 60250
Comparative Tracking Index  300 V
@Temperature 23.0 °C		300 V
@Temperature 73.4 °F		UL 746A
 400 V
@Temperature 23.0 °C		400 V
@Temperature 73.4 °F		IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		ASTM E 831
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		ISO 11359-1/-2
CTE, linear, Transverse to Flow  80.0 µm/m-°C
@Temperature 23.0 - 55.0 °C		44.4 µin/in-°F
@Temperature 73.4 - 131 °F		ASTM E 831
 80.0 µm/m-°C
@Temperature 23.0 - 55.0 °C		44.4 µin/in-°F
@Temperature 73.4 - 131 °F		ISO 11359-1/-2
Deflection Temperature at 0.46 MPa (66 psi) 220 °C428 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 190 °C374 °FISO 75-1/-2
Deflection Temperature at 5.0 MPa 130 °C266 °F4x100x100mm plaque; ISO 75-1/-2
Deflection Temperature at 8.0 MPa 106 °C223 °FISO 75-1/-2
UL RTI, Electrical  140 °C
@Thickness 1.50 mm		284 °F
@Thickness 0.0591 in		UL 746B
 140 °C
@Thickness 0.750 mm		284 °F
@Thickness 0.0295 in		UL 746B
 140 °C
@Thickness 6.00 mm		284 °F
@Thickness 0.236 in		UL 746B
 140 °C
@Thickness 3.00 mm		284 °F
@Thickness 0.118 in		UL 746B
UL RTI, Mechanical with Impact  125 °C
@Thickness 1.50 mm		257 °F
@Thickness 0.0591 in		UL 746B
 125 °C
@Thickness 0.750 mm		257 °F
@Thickness 0.0295 in		UL 746B
 130 °C
@Thickness 6.00 mm		266 °F
@Thickness 0.236 in		UL 746B
 130 °C
@Thickness 3.00 mm		266 °F
@Thickness 0.118 in		UL 746B
UL RTI, Mechanical without Impact  130 °C
@Thickness 0.750 mm		266 °F
@Thickness 0.0295 in		UL 746B
 130 °C
@Thickness 1.50 mm		266 °F
@Thickness 0.0591 in		UL 746B
 140 °C
@Thickness 3.00 mm		284 °F
@Thickness 0.118 in		UL 746B
 140 °C
@Thickness 6.00 mm		284 °F
@Thickness 0.236 in		UL 746B
Flammability, UL94  V-0
@Thickness 0.750 mm		V-0
@Thickness 0.0295 in		IEC 60695-11-10
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		IEC 60695-11-10
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		IEC 60695-11-10
 V-0
@Thickness 6.00 mm		V-0
@Thickness 0.236 in		IEC 60695-11-10
 V-0
@Thickness 6.00 mm		V-0
@Thickness 0.236 in		UL94
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		UL94
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		UL94
 V-0
@Thickness 0.750 mm		V-0
@Thickness 0.0295 in		UL94
 5VA
@Thickness 3.00 mm		5VA
@Thickness 0.118 in		IEC 60695-11-20
Oxygen Index 27 %27 %ISO 4589-1/-2
Glow Wire Test 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 225 °C437 °F10°C/min; ISO 11357-1/-3
 250 °C482 °FOptimum
 240 - 260 °C464 - 500 °F
Mold Temperature 80.0 °C176 °Foptimum
 30.0 - 130 °C86.0 - 266 °F
Drying Temperature 110 - 130 °C230 - 266 °F
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hour
Moisture Content <= 0.040 %<= 0.040 %
 
Descriptive Properties
AppearanceNatural Color
Drying RecommendedYes
FeaturesAppearance, Pleasing Surface
 Chemical Resistance, Good
 Dimensional Stability, Good
 Flame Retardant
 Moisture Absorption, Low
 Processability, Good
 Warp Resistant
 Warpage, Low
FillerGlass fiber reinforcement
FormsPellets
GenericPBT Alloy
Material StatusCurrent
Part Marking Code>PBT+ASA-GF30FR(17)<ISO 11469
Polymer FamilyPolyester
Polymer TypePBT
Processing MethodInjection Molding
Product CategoryFlame Retardant Resins
 Glass Reinforced Resins
 Low Warp Resins
Region Available - GlobalYes
Resin IdentificationPBT+ASA-GF30FR(17)ISO 1043
RoHS ComplianceContact Manufacturer
UsesHousings
 Industrial Applications

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38061.html

免责声明: 本文 DuPont Performance Polymers Crastin® LW9030FR NC010 PBT 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4