塑胶原料之家
  1. 首页
  2. 英文物性
  3. PBT
  4. DuPont Performance Polymers Crastin® HR5315HF NC010 PBT

DuPont Performance Polymers Crastin® HR5315HF NC010 PBT

DuPont Performance Polymers Crastin® HR5315HF NC010 PBT 物性表: DuPont Performance Polymers Crastin® HR5315HF NC010 PBT物性表及特性介绍,DuPont Performance Polymers Crastin® HR5315HF NC010 PBT注塑参数详情,如需DuPont Performance Polymers Crastin® HR5315HF NC010 PBT下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.37
  • 吸水率 [%]: 0.15
  • 缺口冲击强度: 6.0
  • 弯曲模量 [MPa]: 1.70
  • 硬度: 115.0
  • 热变形温度 [℃]: 220.0
 
Physical PropertiesMetricEnglishComments
Density 1.37 g/cc0.0495 lb/in³ISO 1183
Filler Content 15 %15 %
Water Absorption  0.15 %
@Thickness 1.00 mm,
Temperature 23.0 °C		0.15 %
@Thickness 0.0394 in,
Temperature 73.4 °F		Equilibrium 50%RH; ISO 62, Similar to
 0.40 %
@Thickness 1.00 mm,
Temperature 23.0 °C		0.40 %
@Thickness 0.0394 in,
Temperature 73.4 °F		Saturation, immersed; ISO 62, Similar to
Linear Mold Shrinkage, Flow 0.0050 cm/cm
@Thickness 2.00 mm		0.0050 in/in
@Thickness 0.0787 in		Parallel; ISO 294-4
Linear Mold Shrinkage, Transverse 0.011 cm/cm
@Thickness 2.00 mm		0.011 in/in
@Thickness 0.0787 in		Normal; ISO 294-4
Melt Index of Compound 18 g/10 min
@Load 2.16 kg,
Temperature 250 °C		18 g/10 min
@Load 4.76 lb,
Temperature 482 °F		cm3/10 min; ISO 1133
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell R 115115ISO 2039/2
Tensile Strength at Break  40.0 MPa
@Temperature 150 °C		5800 psi
@Temperature 302 °F		ISO 527
 45.0 MPa
@Temperature 120 °C		6530 psi
@Temperature 248 °F		ISO 527
 95.0 MPa
@Temperature 23.0 °C		13800 psi
@Temperature 73.4 °F		ISO 527
 110 MPa
@Temperature -40.0 °C		16000 psi
@Temperature -40.0 °F		ISO 527
Tensile Stress  9.67 MPa
@Strain 0.530 %,
Temperature 120 °C		1400 psi
@Strain 0.530 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 12.1 MPa
@Strain 0.520 %,
Temperature 60.0 °C		1750 psi
@Strain 0.520 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 15.3 MPa
@Strain 0.310 %,
Temperature 23.0 °C		2220 psi
@Strain 0.310 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 16.3 MPa
@Strain 1.06 %,
Temperature 120 °C		2360 psi
@Strain 1.06 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 21.6 MPa
@Strain 1.59 %,
Temperature 120 °C		3130 psi
@Strain 1.59 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 22.5 MPa
@Strain 1.04 %,
Temperature 60.0 °C		3260 psi
@Strain 1.04 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 26.0 MPa
@Strain 2.12 %,
Temperature 120 °C		3770 psi
@Strain 2.12 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 29.2 MPa
@Strain 2.65 %,
Temperature 120 °C		4240 psi
@Strain 2.65 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 29.5 MPa
@Strain 0.620 %,
Temperature 23.0 °C		4280 psi
@Strain 0.620 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 31.0 MPa
@Strain 1.56 %,
Temperature 60.0 °C		4500 psi
@Strain 1.56 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 31.5 MPa
@Strain 3.18 %,
Temperature 120 °C		4570 psi
@Strain 3.18 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 33.2 MPa
@Strain 3.71 %,
Temperature 120 °C		4820 psi
@Strain 3.71 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 34.2 MPa
@Strain 4.24 %,
Temperature 120 °C		4960 psi
@Strain 4.24 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 35.0 MPa
@Strain 4.77 %,
Temperature 120 °C		5080 psi
@Strain 4.77 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 35.5 MPa
@Strain 5.30 %,
Temperature 120 °C		5150 psi
@Strain 5.30 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 37.5 MPa
@Strain 2.08 %,
Temperature 60.0 °C		5440 psi
@Strain 2.08 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 42.5 MPa
@Strain 0.930 %,
Temperature 23.0 °C		6160 psi
@Strain 0.930 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 43.3 MPa
@Strain 2.60 %,
Temperature 60.0 °C		6280 psi
@Strain 2.60 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 47.7 MPa
@Strain 3.12 %,
Temperature 60.0 °C		6920 psi
@Strain 3.12 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 50.0 MPa
@Strain 3.64 %,
Temperature 60.0 °C		7250 psi
@Strain 3.64 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 51.2 MPa
@Strain 4.16 %,
Temperature 60.0 °C		7430 psi
@Strain 4.16 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 51.9 MPa
@Strain 4.68 %,
Temperature 60.0 °C		7530 psi
@Strain 4.68 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 54.0 MPa
@Strain 1.24 %,
Temperature 23.0 °C		7830 psi
@Strain 1.24 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 64.2 MPa
@Strain 1.55 %,
Temperature 23.0 °C		9310 psi
@Strain 1.55 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 72.6 MPa
@Strain 1.86 %,
Temperature 23.0 °C		10500 psi
@Strain 1.86 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 78.9 MPa
@Strain 2.17 %,
Temperature 23.0 °C		11400 psi
@Strain 2.17 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 83.4 MPa
@Strain 2.48 %,
Temperature 23.0 °C		12100 psi
@Strain 2.48 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 86.4 MPa
@Strain 2.79 %,
Temperature 23.0 °C		12500 psi
@Strain 2.79 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 88.3 MPa
@Strain 3.10 %,
Temperature 23.0 °C		12800 psi
@Strain 3.10 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
Elongation at Break  2.0 %
@Temperature -40.0 °C		2.0 %
@Temperature -40.0 °F		ISO 527
 3.0 %
@Temperature 23.0 °C		3.0 %
@Temperature 73.4 °F		ISO 527
 6.0 %
@Temperature 120 °C		6.0 %
@Temperature 248 °F		ISO 527
 8.0 %
@Temperature 150 °C		8.0 %
@Temperature 302 °F		ISO 527
Tensile Modulus  2.10 GPa
@Temperature 150 °C		305 ksi
@Temperature 302 °F		ISO 527
 2.30 GPa
@Temperature 120 °C		334 ksi
@Temperature 248 °F		ISO 527
 5.20 GPa
@Temperature 23.0 °C		754 ksi
@Temperature 73.4 °F		ISO 527
 6.00 GPa
@Temperature -40.0 °C		870 ksi
@Temperature -40.0 °F		ISO 527
Flexural Strength  45.0 MPa
@Temperature 150 °C		6530 psi
@Temperature 302 °F		ISO 178
 60.0 MPa
@Temperature 120 °C		8700 psi
@Temperature 248 °F		ISO 178
 150 MPa
@Temperature 23.0 °C		21800 psi
@Temperature 73.4 °F		ISO 178
 170 MPa
@Temperature -40.0 °C		24700 psi
@Temperature -40.0 °F		ISO 178
Flexural Modulus  1.70 GPa
@Temperature 150 °C		247 ksi
@Temperature 302 °F		ISO 178
 2.00 GPa
@Temperature 120 °C		290 ksi
@Temperature 248 °F		ISO 178
 4.70 GPa
@Temperature 23.0 °C		682 ksi
@Temperature 73.4 °F		ISO 178
 5.80 GPa
@Temperature -40.0 °C		841 ksi
@Temperature -40.0 °F		ISO 178
Izod Impact, Notched (ISO)  6.00 kJ/m²
@Temperature -40.0 °C		2.86 ft-lb/in²
@Temperature -40.0 °F		ISO 180/1A
 10.0 kJ/m²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		ISO 180/1A
 10.0 kJ/m²
@Temperature 23.0 °C		4.76 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1A
Izod Impact, Unnotched (ISO)  30.0 kJ/m²
@Temperature -40.0 °C		14.3 ft-lb/in²
@Temperature -40.0 °F		ISO 180/1U
 40.0 kJ/m²
@Temperature -30.0 °C		19.0 ft-lb/in²
@Temperature -22.0 °F		ISO 180/1U
 45.0 kJ/m²
@Temperature 23.0 °C		21.4 ft-lb/in²
@Temperature 73.4 °F		ISO 180/1U
Charpy Impact Unnotched  3.00 J/cm²
@Temperature -30.0 °C		14.3 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eU
 6.00 J/cm²
@Temperature 23.0 °C		28.6 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eU
Charpy Impact, Notched  0.700 J/cm²
@Temperature -30.0 °C		3.33 ft-lb/in²
@Temperature -22.0 °F		ISO 179/1eA
 1.00 J/cm²
@Temperature 23.0 °C		4.76 ft-lb/in²
@Temperature 73.4 °F		ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity >= 1.00e+15 ohm-cm
@Temperature 23.0 °C		>= 1.00e+15 ohm-cm
@Temperature 73.4 °F		IEC 60093
Dissipation Factor  0.010
@Frequency 100 Hz,
Temperature 23.0 °C		0.010
@Frequency 100 Hz,
Temperature 73.4 °F		IEC 60250
 0.010
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.010
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		IEC 60250
Comparative Tracking Index 325 V
@Temperature 23.0 °C		325 V
@Temperature 73.4 °F		IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		ISO 11359-1/-2
CTE, linear, Transverse to Flow 110 µm/m-°C
@Temperature 23.0 - 55.0 °C		61.1 µin/in-°F
@Temperature 73.4 - 131 °F		ISO 11359-1/-2
Deflection Temperature at 0.46 MPa (66 psi) 220 °C428 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 200 °C392 °FISO 75-1/-2
Glass Transition Temp, Tg 65.0 °C149 °F10°C/min; ISO 11357-1/-2
Flammability, UL94 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		IEC 60695-11-10
Oxygen Index 20 %20 %ISO 4589-1/-2
 
Processing PropertiesMetricEnglishComments
Melt Temperature 225 °C437 °F10°C/min; ISO 11357-1/-3
 240 - 260 °C464 - 500 °F
 250 °C482 °FOptimum
Mold Temperature 30.0 - 130 °C86.0 - 266 °F
 80.0 °C176 °Foptimum
Drying Temperature 110 - 130 °C230 - 266 °F
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hour
Moisture Content <= 0.040 %<= 0.040 %
 
Descriptive Properties
AdditiveHydrolysis Resistant
 Lubricant
AppearanceNatural Color
Drying RecommendedYes
FeaturesChemical Resistance, Good
 Dimensional Stability, Good
 Flow, High
 Hydrolysis Resistant
 Moisture Absorption, Low
 Processability, Good
 Viscosity, Low
FillerGlass fiber reinforcement
FormsPellets
GenericPBT
Material StatusCurrent
Part Marking Code>PBT-IGF15<ISO 11469
Polymer FamilyPolyester
Polymer TypePBT
Processing MethodInjection Molding
Product CategoryGlass Reinforced Resins
 Hydrolysis Resistant Resins
Region Available - GlobalYes
Resin IdentificationPBT-IGF15ISO 1043
RoHS ComplianceContact Manufacturer
Ultrasonic WeldableYes
UsesAutomotive Applications
 Connectors
 Electrical/Electronic Applications
 Industrial Applications
 Parts, Engineering
 Parts, Industrial
 Parts, Machine/Mechanical

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38062.html

免责声明: 本文 DuPont Performance Polymers Crastin® HR5315HF NC010 PBT 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4