Overview of materials for Polyethylene Terephthalate (PET), 20% Glass Reinforced

Overview of materials for Polyethylene Terephthalate (PET), 20% Glass Reinforced 物性表: Overview of materials for Polyethylene Terephthalate (PET), 20% Glass Reinforced物性表及特性介绍,Overview of materials for Polyethylene Terephthalate (PET), 20% Glass Reinforced注塑参数详情,如需Overview of materials for Polyethylene Terephthalate (PET), 20% Glass Reinforced下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 4.0
  • 密度 [g/cm3]: 1.38
  • 吸水率 [%]: 0.05
  • 缺口冲击强度: 0.34
  • 拉伸强度 [MPa]: 1.06
  • 断裂伸长率 [%]: 6.89
  • 弯曲强度 [MPa]: 18.2
  • 弯曲模量 [MPa]: 2.07
  • 硬度: 110.0
  • 热变形温度 [℃]: 220.0
 
Physical PropertiesMetricEnglishComments
Density 1.38 - 1.63 g/cc0.0499 - 0.0589 lb/in³Average value: 1.48 g/cc Grade Count:37
Filler Content 13.0 - 20.0 %13.0 - 20.0 %Average value: 16.5 % Grade Count:10
Water Absorption 0.0500 - 2.50 %0.0500 - 2.50 %Average value: 0.316 % Grade Count:14
Moisture Absorption at Equilibrium 0.100 - 0.250 %0.100 - 0.250 %Average value: 0.200 % Grade Count:11
Viscosity  47000 - 312000 cP
@Temperature 275 - 315 °C
47000 - 312000 cP
@Temperature 527 - 599 °F
Average value: 150000 cP Grade Count:1
 47000 - 312000 cP
@Shear Rate 500 - 7000 1/s
47000 - 312000 cP
@Shear Rate 500 - 7000 1/s
Average value: 150000 cP Grade Count:1
Linear Mold Shrinkage 0.00150 - 0.0120 cm/cm0.00150 - 0.0120 in/inAverage value: 0.00449 cm/cm Grade Count:29
Linear Mold Shrinkage, Transverse 0.00100 - 0.0120 cm/cm0.00100 - 0.0120 in/inAverage value: 0.00868 cm/cm Grade Count:10
Melt Flow 4.00 - 17.0 g/10 min4.00 - 17.0 g/10 minAverage value: 11.3 g/10 min Grade Count:3
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 55.0 - 12355.0 - 123Average value: 95.2 Grade Count:4
Hardness, Rockwell R 110 - 120110 - 120Average value: 115 Grade Count:10
Tensile Strength, Ultimate 18.2 - 150 MPa2640 - 21800 psiAverage value: 92.8 MPa Grade Count:27
 35.9 - 145 MPa
@Temperature -40.0 - 150 °C
5210 - 21000 psi
@Temperature -40.0 - 302 °F
Average value: 56.6 MPa Grade Count:2
 13.4 - 128 MPa
@Temperature -20.0 - 150 °C
1940 - 18600 psi
@Temperature -4.00 - 302 °F
Average value: 56.6 MPa Grade Count:1
 13.4 - 128 MPa
@Strain 0.300 - 10.0 %
1940 - 18600 psi
@Strain 0.300 - 10.0 %
Average value: 56.6 MPa Grade Count:1
Tensile Strength, Yield 1.06 - 115 MPa154 - 16700 psiAverage value: 63.1 MPa Grade Count:10
Elongation at Break 1.50 - 6.00 %1.50 - 6.00 %Average value: 3.17 % Grade Count:34
 2.00 - 14.0 %
@Temperature -40.0 - 150 °C
2.00 - 14.0 %
@Temperature -40.0 - 302 °F
Average value: 8.00 % Grade Count:2
Modulus of Elasticity 4.22 - 9.00 GPa612 - 1310 ksiAverage value: 6.78 GPa Grade Count:20
 1.69 - 7.721 GPa
@Temperature -40.0 - 150 °C
245 - 1120 ksi
@Temperature -40.0 - 302 °F
Average value: 4.25 GPa Grade Count:2
Flexural Yield Strength 6.89 - 178 MPa1000 - 25900 psiAverage value: 130 MPa Grade Count:23
 34.5 - 210 MPa
@Temperature -40.0 - 150 °C
5000 - 30500 psi
@Temperature -40.0 - 302 °F
Average value: 118 MPa Grade Count:2
Flexural Modulus 2.07 - 8.10 GPa300 - 1170 ksiAverage value: 5.46 GPa Grade Count:26
 1.10 - 6.737 GPa
@Temperature -40.0 - 150 °C
160 - 977.1 ksi
@Temperature -40.0 - 302 °F
Average value: 3.33 GPa Grade Count:2
Compressive Yield Strength 93.0 - 138 MPa13500 - 20000 psiAverage value: 123 MPa Grade Count:3
Izod Impact, Notched 0.340 - 1.33 J/cm0.637 - 2.50 ft-lb/inAverage value: 0.739 J/cm Grade Count:20
 0.690 - 0.690 J/cm
@Temperature -40.0 - -40.0 °C
1.29 - 1.29 ft-lb/in
@Temperature -40.0 - -40.0 °F
Average value: 0.690 J/cm Grade Count:1
Izod Impact, Unnotched 2.67 - 8.55 J/cm5.00 - 16.0 ft-lb/inAverage value: 4.27 J/cm Grade Count:6
 6.40 - 6.40 J/cm
@Temperature -40.0 - -40.0 °C
12.0 - 12.0 ft-lb/in
@Temperature -40.0 - -40.0 °F
Average value: 6.40 J/cm Grade Count:1
Izod Impact, Notched (ISO) 4.50 - 13.0 kJ/m²2.14 - 6.19 ft-lb/in²Average value: 7.64 kJ/m² Grade Count:16
 5.00 - 8.00 kJ/m²
@Temperature -40.0 - -30.0 °C
2.38 - 3.81 ft-lb/in²
@Temperature -40.0 - -22.0 °F
Average value: 5.97 kJ/m² Grade Count:9
Izod Impact, Unnotched (ISO) 26.0 - 40.0 kJ/m²12.4 - 19.0 ft-lb/in²Average value: 32.0 kJ/m² Grade Count:3
 18.0 - 35.0 kJ/m²
@Temperature -40.0 - -30.0 °C
8.57 - 16.7 ft-lb/in²
@Temperature -40.0 - -22.0 °F
Average value: 26.0 kJ/m² Grade Count:3
Charpy Impact Unnotched 2.00 - 5.50 J/cm²9.52 - 26.2 ft-lb/in²Average value: 3.71 J/cm² Grade Count:8
 1.50 - 2.50 J/cm²
@Temperature -40.0 - 5.00 °C
7.14 - 11.9 ft-lb/in²
@Temperature -40.0 - 41.0 °F
Average value: 2.00 J/cm² Grade Count:4
Charpy Impact, Notched 0.470 - 1.10 J/cm²2.24 - 5.24 ft-lb/in²Average value: 0.797 J/cm² Grade Count:10
 0.500 - 0.800 J/cm²
@Temperature -40.0 - -30.0 °C
2.38 - 3.81 ft-lb/in²
@Temperature -40.0 - -22.0 °F
Average value: 0.640 J/cm² Grade Count:4
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+11 - 3.00e+16 ohm-cm1.00e+11 - 3.00e+16 ohm-cmAverage value: 7.44e+15 ohm-cm Grade Count:18
Surface Resistance 1.00e+13 - 1.00e+15 ohm1.00e+13 - 1.00e+15 ohmAverage value: 1.72e+14 ohm Grade Count:9
Dielectric Constant 3.30 - 4.603.30 - 4.60Average value: 3.77 Grade Count:7
Dielectric Strength 16.1 - 39.0 kV/mm410 - 991 kV/inAverage value: 23.1 kV/mm Grade Count:12
 6.50 - 15.5 kV/mm
@Temperature 95.0 - 150 °C
165 - 394 kV/in
@Temperature 203 - 302 °F
Average value: 10.4 kV/mm Grade Count:1
 6.50 - 15.5 kV/mm
@Thickness 1.60 - 3.20 mm
165 - 394 kV/in
@Thickness 0.0630 - 0.126 in
Average value: 10.4 kV/mm Grade Count:1
Dissipation Factor 0.00300 - 0.02200.00300 - 0.0220Average value: 0.0151 Grade Count:4
Comparative Tracking Index 175 - 400 V175 - 400 VAverage value: 251 V Grade Count:8
 
Thermal PropertiesMetricEnglishComments
CTE, linear 12.6 - 500 µm/m-°C7.00 - 278 µin/in-°FAverage value: 233 µm/m-°C Grade Count:13
 500 - 500 µm/m-°C
@Temperature 55.0 - 160 °C
278 - 278 µin/in-°F
@Temperature 131 - 320 °F
Average value: 500 µm/m-°C Grade Count:2
CTE, linear, Transverse to Flow 70.0 - 130 µm/m-°C38.9 - 72.2 µin/in-°FAverage value: 101 µm/m-°C Grade Count:5
 109 - 125 µm/m-°C
@Temperature 55.0 - 160 °C
60.6 - 69.4 µin/in-°F
@Temperature 131 - 320 °F
Average value: 114 µm/m-°C Grade Count:2
Melting Point 225 - 260 °C437 - 500 °FAverage value: 247 °C Grade Count:20
Deflection Temperature at 0.46 MPa (66 psi) 220 - 250 °C428 - 482 °FAverage value: 238 °C Grade Count:21
Deflection Temperature at 1.8 MPa (264 psi) 57.2 - 233 °C135 - 451 °FAverage value: 203 °C Grade Count:34
UL RTI, Electrical 75.0 - 140 °C167 - 284 °FAverage value: 134 °C Grade Count:5
UL RTI, Mechanical with Impact 75.0 - 140 °C167 - 284 °FAverage value: 123 °C Grade Count:5
UL RTI, Mechanical without Impact 75.0 - 140 °C167 - 284 °FAverage value: 134 °C Grade Count:5
Flammability, UL94 HB - 5VAHB - 5VAGrade Count:29
Oxygen Index 19.0 - 24.0 %19.0 - 24.0 %Average value: 20.5 % Grade Count:3
Glow Wire Test 675 - 960 °C1250 - 1760 °FAverage value: 809 °C Grade Count:6
 
Processing PropertiesMetricEnglishComments
Processing Temperature 20.0 - 293 °C68.0 - 560 °FAverage value: 244 °C Grade Count:12
Feed Temperature 40.0 - 70.0 °C104 - 158 °FAverage value: 58.6 °C Grade Count:7
Melt Temperature 235 - 300 °C455 - 572 °FAverage value: 273 °C Grade Count:12
Mold Temperature 80.0 - 163 °C176 - 325 °FAverage value: 117 °C Grade Count:22
Drying Temperature 116 - 140 °C240 - 284 °FAverage value: 126 °C Grade Count:15
Dry Time 2.00 - 6.00 hour2.00 - 6.00 hourAverage value: 3.81 hour Grade Count:16
Moisture Content 0.0100 - 0.200 %0.0100 - 0.200 %Average value: 0.0673 % Grade Count:15
Injection Pressure 68.9 - 138 MPa10000 - 20000 psiAverage value: 89.6 MPa Grade Count:5
Hold Pressure 30.0 - 100 MPa4350 - 14500 psiAverage value: 74.4 MPa Grade Count:7

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-38765.html

免责声明: 本文 Overview of materials for Polyethylene Terephthalate (PET), 20% Glass Reinforced 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4