- 密度 [g/cm3]: 1.48
- 吸水率 [%]: 0.05
- 缺口冲击强度: 0.49
- 断裂伸长率 [%]: 153.1
- 弯曲强度 [MPa]: 112.1
- 弯曲模量 [MPa]: 6.74
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.48 g/cc | 0.0535 lb/in³ | ASTM D792 |
| Water Absorption | 0.050 % | 0.050 % | ASTM D570 |
| Linear Mold Shrinkage | 0.00060 cm/cm | 0.00060 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 112.1 MPa | 16260 psi | ASTM D638 |
| Elongation at Break | 1.91 % | 1.91 % | ASTM D638 |
| Tensile Modulus | 6.43 GPa | 933 ksi | ASTM D638 |
| Flexural Yield Strength | 153.1 MPa | 22210 psi | ASTM D790 |
| Flexural Modulus | 6.74 GPa | 978 ksi | ASTM D790 |
| Compressive Yield Strength | 131.8 MPa | 19120 psi | ASTM D695 |
| Izod Impact, Notched | 0.490 J/cm | 0.918 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 5.06e+16 ohm-cm | 5.06e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.0 @Frequency 1e+6 Hz | 3.0 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 16.9 kV/mm | 429 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.015 @Frequency 1e+6 Hz | 0.015 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 100 sec | 100 sec | ASTM D495 |
| Comparative Tracking Index | 225 V | 225 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 214 °C | 417 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.47 mm | HB @Thickness 0.0579 in | |