- 密度 [g/cm3]: 1.59
- 吸水率 [%]: 0.06
- 缺口冲击强度: 0.7
- 弯曲模量 [MPa]: 9.70
- 热变形温度 [℃]: 245.0
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.59 g/cc | 0.0574 lb/in³ | ASTM D792 |
Water Absorption | 0.060 % | 0.060 % | ASTM D570 |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm | 0.0030 in/in | MD |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm | 0.0090 in/in | |
Mechanical Properties | Metric | English | Comments |
Hardness, Rockwell M | 95 | 95 | ASTM D785 |
Tensile Strength at Break | 147 MPa | 21300 psi | ASTM D638 |
Elongation at Break | 2.2 % | 2.2 % | ASTM D638 |
Flexural Strength | 190 MPa | 27600 psi | ASTM D790 |
Flexural Modulus | 9.70 GPa | 1410 ksi | ASTM D790 |
Izod Impact, Notched | 0.700 J/cm | 1.31 ft-lb/in | ASTM D256 |
Taber Abrasion, mg/1000 Cycles | 15 | 15 | CS-17; ASTM D1044 |
Electrical Properties | Metric | English | Comments |
Volume Resistivity | 1.00e+16 ohm-cm | 1.00e+16 ohm-cm | ASTM D257 |
Dielectric Strength | 25.0 kV/mm @Thickness 2.00 mm | 635 kV/in @Thickness 0.0787 in | ASTM D149 |
Arc Resistance | 131 sec | 131 sec | UL recognition value, tungsten electrode; ASTM D495 |
Comparative Tracking Index | 175 - 249 V | 175 - 249 V | IEC Pub1.112, class 3; IEC Method |
Thermal Properties | Metric | English | Comments |
CTE, linear | 30.0 µm/m-°C @Temperature 20.0 °C | 16.7 µin/in-°F @Temperature 68.0 °F | ASTM D696 |
Melting Point | 255 °C | 491 °F | By DSC |
Maximum Service Temperature, Air | 130 °C | 266 °F | Provisional 150, Thermal index; ASTM UL746B |
225 °C | 437 °F | Ball pressure temperature; IEC Method | |
Deflection Temperature at 0.46 MPa (66 psi) | 245 °C | 473 °F | ASTM D648 |
Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ASTM D648 |
Flammability, UL94 | HB @Thickness 0.7937 mm | HB @Thickness 0.03125 in | |
Processing Properties | Metric | English | Comments |
Melt Temperature | 255 - 270 °C | 491 - 518 °F | |
Mold Temperature | 90.0 - 120 °C | 194 - 248 °F |