- 熔体流动速率 [g/10min]: 0.8
- 密度 [g/cm3]: 0.9255
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 0.9255 g/cc | 0.03344 lb/in³ | ASTM D792 |
Thickness | 50.8 microns | 2.00 mil | |
Melt Flow | 0.80 g/10 min @Load 2.16 kg, Temperature 190 °C | 0.80 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 |
Mechanical Properties | Metric | English | Comments |
Film Tensile Strength at Yield, MD | 14.78 MPa | 2143 psi | ASTM D882 |
Film Tensile Strength at Yield, TD | 16.03 MPa | 2325 psi | ASTM D882 |
Film Elongation at Break, MD | 786 % | 786 % | ASTM D882 |
Film Elongation at Break, TD | 854 % | 854 % | ASTM D882 |
Secant Modulus, MD | 0.282023 GPa | 40.9046 ksi | 2% Secant; ASTM D882 |
Secant Modulus, TD | 0.332741 GPa | 48.2607 ksi | 2% Secant; ASTM D882 |
Impact | 18 | 18 | [lbf]; Puncture Resistance Force; Dow Method |
159 | 159 | [ft-lbf/in3]; Puncture Resistance; Dow Method | |
4204 | 4204 | [ft-lbf/in3]; Toughness MD; ASTM D882 | |
4267 | 4267 | [ft-lbf/in3]; Toughness TD; ASTM D882 | |
Puncture Energy | 5.42 J | 4.00 ft-lb | Dow Method |
Elmendorf Tear Strength MD | 465 g | 465 g | Method B; ASTM D1922 |
Elmendorf Tear Strength TD | 1116 g | 1116 g | Method B; ASTM D1922 |
Elmendorf Tear Strength, MD | 9.154 g/micron | 232.5 g/mil | ASTM D1922 |
Elmendorf Tear Strength, TD | 22.0 g/micron | 558 g/mil | ASTM D1922 |
Dart drop Test | <= 100 g | <= 0.221 lb | Method B; ASTM D1709 |
186 g | 0.410 lb | Method A; ASTM D1709 | |
Film Tensile Strength at Break, MD | 32.19 MPa | 4669 psi | ASTM D882 |
Film Tensile Strength at Break, TD | 46.00 MPa | 6672 psi | ASTM D882 |
Heat Seal Strength, Ultimate | 21.8 N | 4.90 lb (f) | at 180°C, 0.5 sec dwell, 40 psi bar pressure, pull speed 10 (in./min.); Dow Method |
Heat Seal Strength Initiation Temperature | 130 °C | 266 °F | 1 lb/in heat seal strength; 0.5 sec dwell, 40 psi bar pressure, pull speed 10 (in./min.); Dow Method |
Thermal Properties | Metric | English | Comments |
Melting Point | 125 °C | 257 °F | Dow Method (DSC) |
Vicat Softening Point | 113 °C | 235 °F | ASTM D1525 |
Optical Properties | Metric | English | Comments |
Haze | 16 % | 16 % | ASTM D1003 |
Gloss | 54 % | 54 % | 45°; ASTM D2457 |
55 % | 55 % | 20°; ASTM D2457 |