Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene物性表参数

Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene

Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene 物性表: Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene物性表及特性介绍,Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene注塑参数详情,如需Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 50.0
拉伸强度 [MPa]: 10.0
弯曲模量 [MPa]: 0.220
脆化温度 [℃]: -70.0

Physical Properties	Metric	English	Comments

Specific Gravity	0.925 g/cc	0.925 g/cc	ISO 1183
Melt Flow	50 g/10 min @Load 2.16 kg, Temperature 190 °C	50 g/10 min @Load 4.76 lb, Temperature 374 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	47	47	ISO 868/A
Tensile Strength at Break	10.0 MPa	1450 psi	ISO 527
Tensile Strength, Yield	10.0 MPa	1450 psi	ISO 527
Elongation at Break	>= 500 %	>= 500 %	ISO 527
Flexural Modulus	0.220 GPa	31.9 ksi	ISO 178

Thermal Properties	Metric	English	Comments
Melting Point	117 °C	243 °F	Internal method
Vicat Softening Point	92.0 °C @Load 1.00 kg	198 °F @Load 2.20 lb	ISO 306/A
Brittleness Temperature	<= -70.0 °C	<= -94.0 °F	ASTM D746

关键词:
供应
LLDPE
Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-40270.html

免责声明: 本文 Polimeri Europa Flexirene® MT 40 A Linear Low Density Polyethylene 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息