Premix Thermoplastics PRE-ELEC® PE 1270

Premix Thermoplastics PRE-ELEC® PE 1270 物性表: Premix Thermoplastics PRE-ELEC® PE 1270物性表及特性介绍,Premix Thermoplastics PRE-ELEC® PE 1270注塑参数详情,如需Premix Thermoplastics PRE-ELEC® PE 1270下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.5
  • 密度 [g/cm3]: 1.01
  • 拉伸强度 [MPa]: 11.0
 
Physical PropertiesMetricEnglishComments
Density 1.01 g/cc0.0365 lb/in³
Linear Mold Shrinkage 0.014 - 0.016 cm/cm0.014 - 0.016 in/inISO 294-4
Melt Flow  0.50 g/10 min
@Load 2.16 kg,
Temperature 190 °C
0.50 g/10 min
@Load 4.76 lb,
Temperature 374 °F
ISO 1133
 2.5 g/10 min
@Load 5.00 kg,
Temperature 190 °C
2.5 g/10 min
@Load 11.0 lb,
Temperature 374 °F
ISO 1133
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 11.0 MPa1600 psiISO 527
Elongation at Break 520 %520 %ISO 527
Modulus of Elasticity 0.220 GPa31.9 ksiISO 178
Izod Impact, Notched  NB
@Thickness 4.00 mm,
Temperature -20.0 °C
NB
@Thickness 0.157 in,
Temperature -4.00 °F
ISO 180
 NB
@Thickness 4.00 mm,
Temperature 23.0 °C
NB
@Thickness 0.157 in,
Temperature 73.4 °F
ISO 180
Izod Impact, Unnotched  NB
@Thickness 4.00 mm,
Temperature -20.0 °C
NB
@Thickness 0.157 in,
Temperature -4.00 °F
ISO 180
 NB
@Thickness 4.00 mm,
Temperature 23.0 °C
NB
@Thickness 0.157 in,
Temperature 73.4 °F
ISO 180
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity <= 10000 ohm-cm<= 10000 ohm-cmISO D-257
Surface Resistance <= 100000 ohm<= 100000 ohmISO D-257
 
Thermal PropertiesMetricEnglishComments
Vicat Softening Point 88.0 °C190 °FRate A; ISO 306/A50
 
Processing PropertiesMetricEnglishComments
Melt Temperature 180 - 220 °C356 - 428 °F
Mold Temperature 20.0 - 50.0 °C68.0 - 122 °F
Dry Time 3 hour3 hourAt 90°C; If stored for longer than 1 year
Moisture Content <= 0.15 %<= 0.15 %When Produced
Injection Pressure 60.0 - 80.0 MPa8700 - 11600 psi
Shelf Life 12.0 Month12.0 MonthNormal Storing Conditions
 
Descriptive Properties
AppearanceGranule
ColorBlack
Injection SpeedModerate

**
Materials flagged as discontinued () are no longer part of the manufacturer’s standard product line according to our latest information. These materials may be available by special order, in distribution inventory, or reinstated as an active product. Data sheets from materials that are no longer available remain in MatWeb to assist users in finding replacement materials.

Users of our Advanced Search (registration required) may exclude discontinued materials from search results.

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-40659.html

免责声明: 本文 Premix Thermoplastics PRE-ELEC® PE 1270 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4