PolyOne Maxxam® FR PE 113 Low Density Polyethylene (LDPE)

PolyOne Maxxam® FR PE 113 Low Density Polyethylene (LDPE) 物性表: PolyOne Maxxam® FR PE 113 Low Density Polyethylene (LDPE)物性表及特性介绍,PolyOne Maxxam® FR PE 113 Low Density Polyethylene (LDPE)注塑参数详情,如需PolyOne Maxxam® FR PE 113 Low Density Polyethylene (LDPE)下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 0.9
  • 密度 [g/cm3]: 0.969
  • 拉伸强度 [MPa]: 13.8
 
Physical PropertiesMetricEnglishComments
Specific Gravity 0.980 g/cc0.980 g/ccASTM D792
Density 0.969 g/cc0.0350 lb/in³ASTM D792
Melt Flow 0.90 g/10 min
@Load 2.16 kg,
Temperature 190 °C
0.90 g/10 min
@Load 4.76 lb,
Temperature 374 °F
Procedure A - Manual Operation; ASTM D1238
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength, Yield 13.8 MPa2000 psiType 1 - Rigids, 2 in/min; ASTM D638
Elongation at Break 500 %500 %Type 1 - Rigids, 2 in/min; ASTM D638
 
Electrical PropertiesMetricEnglishComments
Dielectric Constant 2.34
@Frequency 1e+7 Hz
2.34
@Frequency 1e+7 Hz
ASTM D150
Dissipation Factor 0.0010
@Frequency 1e+7 Hz
0.0010
@Frequency 1e+7 Hz
ASTM D150
 
Thermal PropertiesMetricEnglishComments
Vicat Softening Point 87.8 °C190 °F
Flammability, UL94 V-2V-2All Colors; 0.062 in.; PolyOne Internal
Oxygen Index 24.8 %24.8 %0.062 in bars; ASTM D2863

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-41527.html

免责声明: 本文 PolyOne Maxxam® FR PE 113 Low Density Polyethylene (LDPE) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4