- 熔体流动速率 [g/10min]: 1.37
- 密度 [g/cm3]: 1.06
- 吸水率 [%]: 0.02
- 缺口冲击强度: 3.84
- 弯曲强度 [MPa]: 8.07
- 弯曲模量 [MPa]: 0.185
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.06 g/cc | 0.0383 lb/in³ | ASTM D792 |
| Water Absorption | 0.020 % | 0.020 % | at Equilibrium; ASTM D570 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | ASTM D955 |
| Melt Flow | 1.37 g/10 min @Load 2.16 kg, Temperature 190 °C | 1.37 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore A | 88 | 88 | ASTM D2240 |
| Tensile Strength, Ultimate | 8.07 MPa | 1170 psi | ASTM D638 |
| Elongation at Break | 1000 % | 1000 % | ASTM D638 |
| Flexural Strength | 5.17 MPa | 750 psi | ASTM D790 |
| Flexural Modulus | 0.185 GPa | 26.8 ksi | Method I (3 point load), Procedure B); ASTM D790 |
| Izod Impact, Notched | 3.84 J/cm | 7.20 ft-lb/in | 73°F; ASTM D256 |
| Gardner Impact | 14.3490 J | 10.5833 ft-lb | ASTM D3029 |
| Electrical Properties | Metric | English | Comments |
| Volume Resistivity | 1.80e+15 ohm-cm | 1.80e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.64 @Frequency 100000 Hz | 2.64 @Frequency 100000 Hz | ASTM D150 |
| 3.15 @Frequency 100 Hz | 3.15 @Frequency 100 Hz | ASTM D150 | |
| Dielectric Strength | 26.0 kV/mm | 661 kV/in | ASTM D149 |
| Dissipation Factor | 0.015 @Frequency 100000 Hz | 0.015 @Frequency 100000 Hz | ASTM D150 |
| 0.016 @Frequency 100 Hz | 0.016 @Frequency 100 Hz | ASTM D150 | |
| Thermal Properties | Metric | English | Comments |
| Flammability, UL94 | V-0 | V-0 | 0.0866 in |
| V-0 | V-0 | 0.125 in | |