LyondellBasell Alathon® H5112 High Density Polyethylene, Injection Molding Grade

LyondellBasell Alathon® H5112 High Density Polyethylene, Injection Molding Grade 物性表: LyondellBasell Alathon® H5112 High Density Polyethylene, Injection Molding Grade物性表及特性介绍,LyondellBasell Alathon® H5112 High Density Polyethylene, Injection Molding Grade注塑参数详情,如需LyondellBasell Alathon® H5112 High Density Polyethylene, Injection Molding Grade下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 12.0
  • 密度 [g/cm3]: 0.951
  • 缺口冲击强度: 0.299
  • 弯曲模量 [MPa]: 0.9094
  • 热变形温度 [℃]: 70.0
  • 脆化温度 [℃]: -76.0
 
Physical PropertiesMetricEnglishComments
Bulk Density 0.593 - 0.625 g/cc0.0214 - 0.0226 lb/in³ASTM D1895
Density 0.951 g/cc0.0344 lb/in³ASTM D1505
Melt Flow 12 g/10 min
@Load 2.16 kg,
Temperature 190 °C
12 g/10 min
@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Spiral Flow 35.1 cm13.8 inEquistar test
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 7171ASTM D2240
Tensile Strength at Break 26.4 MPa3830 psi50 mm/min; ASTM D638
Elongation at Break 11 %11 %50 mm/min; ASTM D638
Tensile Modulus 0.7274 GPa105.5 ksi1% Secant; 50mm/min; ASTM D638
 0.8839 GPa128.2 ksi50mm/min; ASTM D638
Flexural Modulus 0.9094 GPa131.9 ksi2% Secant; 12.5 mm/min; ASTM D790
 1.092 GPa158.4 ksi1% Secant; 12.5 mm/min; ASTM D790
 1.175 GPa170.4 ksi12.5 mm/min; ASTM D790
Izod Impact, Notched 0.299 J/cm0.560 ft-lb/inASTM D256
 NB
@Temperature -18.0 °C
NB
@Temperature -0.400 °F
ASTM D4812
 
Thermal PropertiesMetricEnglishComments
Melting Point 128.2 °C262.8 °FASTM D3418
Crystallization Temperature 114.2 °C237.6 °FASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 70.0 °C158 °FASTM D648
Vicat Softening Point 124 °C255 °FASTM D1525
Brittleness Temperature <= -76.0 °C<= -105 °FASTM D746
 
Processing PropertiesMetricEnglishComments
Rear Barrel Temperature 232 °C450 °F
Middle Barrel Temperature 243 °C470 °F
Front Barrel Temperature 246 °C475 °F
Nozzle Temperature 246 °C475 °F

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-42463.html

免责声明: 本文 LyondellBasell Alathon® H5112 High Density Polyethylene, Injection Molding Grade 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4