Total MDPE HL 323 Medium Density Polyethylene, Film Resin物性表参数

Total MDPE HL 323 Medium Density Polyethylene, Film Resin

Total MDPE HL 323 Medium Density Polyethylene, Film Resin 物性表: Total MDPE HL 323 Medium Density Polyethylene, Film Resin物性表及特性介绍,Total MDPE HL 323 Medium Density Polyethylene, Film Resin注塑参数详情,如需Total MDPE HL 323 Medium Density Polyethylene, Film Resin下载, 可到相关下载区下载

熔体流动速率 [g/10min]: 0.23

Physical Properties	Metric	English	Comments

Specific Gravity	0.937 g/cc	0.937 g/cc	ISO 1183
Water Vapor Transmission	12.4 g/m²/day	0.800 g/100 in²/day	ASTM E96/66
Melt Flow	0.23 g/10 min @Load 2.16 kg, Temperature 190 °C	0.23 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238
	20 g/10 min @Load 21.6 kg, Temperature 190 °C	20 g/10 min @Load 47.6 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	12.4 MPa	1800 psi	ASTM D882, A
Film Tensile Strength at Yield, TD	19.3 MPa	2800 psi	ASTM D882, A
Film Elongation at Break, MD	500 %	500 %	ASTM D882, A
Film Elongation at Break, TD	900 %	900 %	ASTM D882, A
Elmendorf Tear Strength MD	18 g	18 g	ASTM D1922
Elmendorf Tear Strength TD	1350 g	1350 g	ASTM D1922
Dart drop Test	<= 50.0 g	<= 0.110 lb	ASTM D1709,A
Film Tensile Strength at Break, MD	57.2 MPa	8300 psi	ASTM D882, A
Film Tensile Strength at Break, TD	36.5 MPa	5300 psi	ASTM D882, A
1% Secant Modulus, MD	441 MPa	64000 psi	ASTM D882, A
1% Secant Modulus, TD	586 MPa	85000 psi	ASTM D882, A

Thermal Properties	Metric	English	Comments
Melting Point	126 °C	259 °F	ASTM D3417

Processing Properties	Metric	English	Comments
Melt Temperature	193 - 216 °C	380 - 420 °F	Extrusion

关键词:
供应
MDPE
Total MDPE HL 323 Medium Density Polyethylene
Film Resin

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43011.html

免责声明: 本文 Total MDPE HL 323 Medium Density Polyethylene, Film Resin 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息