Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled

Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled 物性表: Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled物性表及特性介绍,Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled注塑参数详情,如需Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled下载, 可到相关下载区下载
  • 密度 [g/cm3]: 2.24
  • 吸水率 [%]: 0.03
  • 断裂伸长率 [%]: 13.0
  • 弯曲强度 [MPa]: 7.0
  • 硬度: 50.0
 
Physical PropertiesMetricEnglishComments
Density 2.24 - 2.33 g/cc0.0809 - 0.0842 lb/in³Average value: 2.29 g/cc Grade Count:9
Water Absorption 0.0300 - 0.100 %0.0300 - 0.100 %Average value: 0.0650 % Grade Count:4
Moisture Absorption at Equilibrium 0.100 %0.100 %Average value: 0.100 % Grade Count:3
Water Absorption at Saturation 0.200 - 2.50 %0.200 - 2.50 %Average value: 1.10 % Grade Count:5
Deformation 1.10 - 12.0 %1.10 - 12.0 %Average value: 5.42 % Grade Count:4
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell R 50.0 - 55.050.0 - 55.0Average value: 52.0 Grade Count:5
Hardness, Shore D 60.0 - 70.060.0 - 70.0Average value: 64.1 Grade Count:8
Ball Indentation Hardness 40.0 - 135 MPa5800 - 19600 psiAverage value: 75.0 MPa Grade Count:5
Tensile Strength, Ultimate 7.00 - 23.0 MPa1020 - 3340 psiAverage value: 10.5 MPa Grade Count:8
Elongation at Break 6.50 - 300 %6.50 - 300 %Average value: 86.6 % Grade Count:9
Elongation at Yield 4.00 - 5.00 %4.00 - 5.00 %Average value: 4.33 % Grade Count:3
Modulus of Elasticity 1.45 - 2.07 GPa210 - 300 ksiAverage value: 1.69 GPa Grade Count:5
Flexural Yield Strength 13.0 - 15.2 MPa1890 - 2200 psiAverage value: 14.0 MPa Grade Count:5
Compressive Yield Strength 10.5 - 27.6 MPa1520 - 4000 psiAverage value: 18.3 MPa Grade Count:5
Charpy Impact Unnotched 0.800 - 3.00 J/cm²3.81 - 14.3 ft-lb/in²Average value: 2.27 J/cm² Grade Count:3
Charpy Impact, Notched 0.450 - 0.750 J/cm²2.14 - 3.57 ft-lb/in²Average value: 0.650 J/cm² Grade Count:3
Coefficient of Friction 0.0300 - 0.3000.0300 - 0.300Average value: 0.175 Grade Count:8
Coefficient of Friction, Static 0.0800 - 0.3200.0800 - 0.320Average value: 0.192 Grade Count:4
K (wear) Factor 4.03 - 1210 x 10-8 mm³/N-M2.00 - 600 x 10-10 in³-min/ft-lb-hrAverage value: 424 x 10-8 mm³/N-M Grade Count:3
Limiting Pressure Velocity 0.250 - 0.400 MPa-m/sec7140 - 11400 psi-ft/minAverage value: 0.310 MPa-m/sec Grade Count:4
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 1.00e+10 - 1.00e+15 ohm-cm1.00e+10 - 1.00e+15 ohm-cmAverage value: 1.70e+14 ohm-cm Grade Count:6
Surface Resistance 1.00e+10 - 1.00e+13 ohm1.00e+10 - 1.00e+13 ohmAverage value: 4.53e+12 ohm Grade Count:7
Dielectric Constant 2.58 - 2.852.58 - 2.85Average value: 2.72 Grade Count:4
Dielectric Strength 7.00 - 25.0 kV/mm178 - 635 kV/inAverage value: 11.2 kV/mm Grade Count:7
 
Thermal PropertiesMetricEnglishComments
CTE, linear 45.0 - 103 µm/m-°C25.0 - 57.0 µin/in-°FAverage value: 73.5 µm/m-°C Grade Count:5
Thermal Conductivity 0.440 - 0.770 W/m-K3.05 - 5.34 BTU-in/hr-ft²-°FAverage value: 0.683 W/m-K Grade Count:4
Melting Point 327 - 327 °C621 - 621 °FAverage value: 327 °C Grade Count:7
Maximum Service Temperature, Air 260 °C500 °FAverage value: 260 °C Grade Count:8
Deflection Temperature at 1.8 MPa (264 psi) 98.9 - 132 °C210 - 270 °FAverage value: 112 °C Grade Count:5
Minimum Service Temperature, Air -200 - -50.0 °C-328 - -58.0 °FAverage value: -117 °C Grade Count:3
Flammability, UL94 V-0V-0Grade Count:7
Oxygen Index 95.0 %95.0 %Average value: 95.0 % Grade Count:3

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-43544.html

免责声明: 本文 Overview of materials for Polytetrafluoroethylene (PTFE), Mica Filled 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4