Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced物性表参数

Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced

Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced 物性表: Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced物性表及特性介绍,Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced注塑参数详情,如需Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced下载, 可到相关下载区下载

密度 [g/cm3]: 1.18
弯曲模量 [MPa]: 3.30

Physical Properties	Metric	English	Comments

Density	1.18 - 1.36 g/cc	0.0426 - 0.0491 lb/in³	Average value: 1.24 g/cc Grade Count:4
Linear Mold Shrinkage	0.00500 - 0.00950 cm/cm	0.00500 - 0.00950 in/in	Average value: 0.00783 cm/cm Grade Count:3

Mechanical Properties	Metric	English	Comments
Flexural Modulus	3.30 - 4.83 GPa	479 - 700 ksi	Average value: 3.91 GPa Grade Count:3

Thermal Properties	Metric	English	Comments
Melting Point	200 - 260 °C	392 - 500 °F	Average value: 234 °C Grade Count:3
Deflection Temperature at 1.8 MPa (264 psi)	127 - 235 °C	261 - 455 °F	Average value: 178 °C Grade Count:4

Processing Properties	Metric	English	Comments
Dry Time	2.00 - 4.00 hour @Temperature 79.4 - 79.4 °C	2.00 - 4.00 hour @Temperature 175 - 175 °F	Average value: 3.00 hour Grade Count:1

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-44239.html

免责声明: 本文 Overview of materials for Nylon 66/6, 10% Glass Fiber Reinforced 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息