- 吸水率 [%]: 1.1
- 缺口冲击强度: 1.27
- 拉伸强度 [MPa]: 196.0
- 弯曲模量 [MPa]: 12.1
- 硬度: 120.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.58 g/cc | 1.58 g/cc | Dry; ASTM D792 |
| Water Absorption | 1.1 % | 1.1 % | Wet |
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | Dry; ASTM D2863 |
| Linear Mold Shrinkage, Transverse | 0.0050 cm/cm | 0.0050 in/in | Dry; ASTM D2863 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Rockwell M | 90 | 90 | Dry; ASTM D785 |
| Hardness, Rockwell R | 120 | 120 | Dry; ASTM D785 |
| Tensile Strength, Yield | 196 MPa | 28400 psi | Wet; ASTM D638 |
| 235 MPa | 34100 psi | Dry; ASTM D638 | |
| Elongation at Break | 2.5 % | 2.5 % | Dry; ASTM D638 |
| 3.0 % | 3.0 % | Wet; ASTM D638 | |
| Flexural Strength | 304 MPa | 44100 psi | Wet; ASTM D790 |
| 373 MPa | 54100 psi | Dry; ASTM D790 | |
| Flexural Modulus | 12.1 GPa | 1750 ksi | Wet; ASTM D790 |
| 15.5 GPa | 2250 ksi | Dry; ASTM D790 | |
| Izod Impact, Notched | 1.27 J/cm | 2.38 ft-lb/in | Dry; ASTM D256 |
| 1.33 J/cm | 2.49 ft-lb/in | Wet; ASTM D256 | |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 20.0 µm/m-°C @Temperature 20.0 °C | 11.1 µin/in-°F @Temperature 68.0 °F | Dry; ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 225 °C | 437 °F | Dry; ASTM D648 |
| Flammability, UL94 | HB | HB | Dry |