- 密度 [g/cm3]: 1.14
- 吸水率 [%]: 8.0
- 拉伸强度 [MPa]: 90.0
- 弯曲模量 [MPa]: 2.80
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | ISO 1183 | ||
| Moisture Absorption at Equilibrium | 2.4 % | 2.4 % | in normal climate 23°C/50%RH; ISO 62 | ||
| Water Absorption at Saturation | 8.0 % | 8.0 % | in water at 23°C; ISO 62 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 88 @Thickness 10.0 mm | 88 @Thickness 0.394 in | ISO 2039-2 | ||
| Ball Indentation Hardness | 160 MPa | 23200 psi | value at 30 sec.; ISO 2039-1 | ||
| Tensile Strength, Yield | 90.0 MPa | 13100 psi | v = 50 mm/min; ISO 527-2 | ||
| Elongation at Break | >= 40 % | >= 40 % | ISO 527-2 | ||
| Tensile Modulus | 3.10 GPa | 450 ksi | ISO 527-2 | ||
| Flexural Modulus | 2.80 GPa | 406 ksi | ISO 178 | ||
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU | ||
| Charpy Impact, Notched | 0.600 J/cm² | 2.86 ft-lb/in² | ISO 179/1eA | ||
| Electrical Properties | Metric | English | Comments | ||
| Electrical Resistivity | 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | IEC 60093 | ||
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | IEC 60093 | ||
| Dielectric Constant | 3.3 @Frequency 1e+6 Hz | 3.3 @Frequency 1e+6 Hz | IEC 60250 | ||
| 3.8 @Frequency 100 Hz | 3.8 @Frequency 100 Hz | IEC 60250 | |||
| Dielectric Strength | 27.0 kV/mm | 686 kV/in | in transformer oil; IEC 60243-1 | ||
| Dissipation Factor | 0.013 @Frequency 100 Hz | 0.013 @Frequency 100 Hz | IEC 60250 | ||
| 0.020 @Frequency 1e+6 Hz | 0.020 @Frequency 1e+6 Hz | IEC 60250 | |||
| Comparative Tracking Index | 600 V | 600 V | IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 80.0 µm/m-°C @Temperature 20.0 °C | 44.4 µin/in-°F @Temperature 68.0 °F | ISO 11359 | ||
| Thermal Conductivity | 0.280 W/m-K | 1.94 BTU-in/hr-ft²-°F | |||
| Melting Point | 260 °C | 500 °F | 10K/min; ISO 3146 | ||
| Maximum Service Temperature, Air | 95.0 °C | 203 °F | Long Term | ||
| 180 °C | 356 °F | Short term | |||
| Deflection Temperature at 1.8 MPa (264 psi) | 85.0 °C | 185 °F | ISO 75-2 | ||
| Minimum Service Temperature, Air | -30.0 °C | -22.0 °F | |||
| Flammability, UL94 | V-2 @Thickness 1.00 mm | V-2 @Thickness 0.0394 in | |||
| V-2 @Thickness 6.00 mm | V-2 @Thickness 0.236 in | ||||
| Descriptive Properties | |||||
| Food Compliance | yes | BGVV | |||
| yes | FD A | ||||