塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66

DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66

DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.41
  • 吸水率 [%]: 1.7
  • 缺口冲击强度: 10.0
  • 硬度: 117.0
  • 热变形温度 [℃]: 261.0
 
Physical PropertiesMetricEnglishComments
Density 1.41 g/cc0.0509 lb/in³DAM; ISO 1183
Filler Content 35 %35 %DAM
Water Absorption  1.7 %
@Temperature 23.0 °C		1.7 %
@Temperature 73.4 °F		Equilibrium 50%RH; DAM; ISO 62, Similar to
 5.5 %
@Temperature 23.0 °C		5.5 %
@Temperature 73.4 °F		Saturation, immersed; DAM; ISO 62, Similar to
Viscosity  58000 cP
@Shear Rate 7000 1/s,
Temperature 305 °C		58000 cP
@Shear Rate 7000 1/s,
Temperature 581 °F		DAM; ISO 11443
 69000 cP
@Shear Rate 5000 1/s,
Temperature 305 °C		69000 cP
@Shear Rate 5000 1/s,
Temperature 581 °F		DAM; ISO 11443
 73000 cP
@Shear Rate 7000 1/s,
Temperature 295 °C		73000 cP
@Shear Rate 7000 1/s,
Temperature 563 °F		DAM; ISO 11443
 86000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		86000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		DAM; ISO 11443
 107000 cP
@Shear Rate 2000 1/s,
Temperature 305 °C		107000 cP
@Shear Rate 2000 1/s,
Temperature 581 °F		DAM; ISO 11443
 116000 cP
@Shear Rate 7000 1/s,
Temperature 275 °C		116000 cP
@Shear Rate 7000 1/s,
Temperature 527 °F		DAM; ISO 11443
 134000 cP
@Shear Rate 2000 1/s,
Temperature 295 °C		134000 cP
@Shear Rate 2000 1/s,
Temperature 563 °F		DAM; ISO 11443
 137000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		137000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		DAM; ISO 11443
 147000 cP
@Shear Rate 1000 1/s,
Temperature 305 °C		147000 cP
@Shear Rate 1000 1/s,
Temperature 581 °F		DAM; ISO 11443
 171000 cP
@Shear Rate 700 1/s,
Temperature 305 °C		171000 cP
@Shear Rate 700 1/s,
Temperature 581 °F		DAM; ISO 11443
 185000 cP
@Shear Rate 1000 1/s,
Temperature 295 °C		185000 cP
@Shear Rate 1000 1/s,
Temperature 563 °F		DAM; ISO 11443
 196000 cP
@Shear Rate 500 1/s,
Temperature 305 °C		196000 cP
@Shear Rate 500 1/s,
Temperature 581 °F		DAM; ISO 11443
 215000 cP
@Shear Rate 700 1/s,
Temperature 295 °C		215000 cP
@Shear Rate 700 1/s,
Temperature 563 °F		DAM; ISO 11443
 216000 cP
@Shear Rate 2000 1/s,
Temperature 275 °C		216000 cP
@Shear Rate 2000 1/s,
Temperature 527 °F		DAM; ISO 11443
 248000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		248000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		DAM; ISO 11443
 299000 cP
@Shear Rate 1000 1/s,
Temperature 275 °C		299000 cP
@Shear Rate 1000 1/s,
Temperature 527 °F		DAM; ISO 11443
 350000 cP
@Shear Rate 700 1/s,
Temperature 275 °C		350000 cP
@Shear Rate 700 1/s,
Temperature 527 °F		DAM; ISO 11443
 404000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		404000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		DAM; ISO 11443
Linear Mold Shrinkage, Flow 0.0030 cm/cm
@Thickness 2.00 mm		0.0030 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.011 cm/cm
@Thickness 2.00 mm		0.011 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 898950%RH; ISO 2039/2
 105105DAM; ISO 2039/2
Hardness, Rockwell R 11711750%RH; ISO 2039/2
 125125DAM; ISO 2039/2
Tensile Strength at Break  145 MPa
@Temperature 23.0 °C		21000 psi
@Temperature 73.4 °F		50%RH; ISO 527
 210 MPa
@Temperature 23.0 °C		30500 psi
@Temperature 73.4 °F		DAM; ISO 527
Tensile Stress  4.99 MPa
@Strain 0.110 %,
Temperature 120 °C		724 psi
@Strain 0.110 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 7.61 MPa
@Strain 0.150 %,
Temperature 90.0 °C		1100 psi
@Strain 0.150 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 11.43 MPa
@Strain 0.280 %,
Temperature 150 °C		1658 psi
@Strain 0.280 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 11.7 MPa
@Strain 0.200 %,
Temperature 60.0 °C		1700 psi
@Strain 0.200 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 13.22 MPa
@Strain 0.300 %,
Temperature 120 °C		1917 psi
@Strain 0.300 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 19.29 MPa
@Strain 0.300 %,
Temperature 23.0 °C		2798 psi
@Strain 0.300 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 20.06 MPa
@Strain 0.330 %,
Temperature 40.0 °C		2909 psi
@Strain 0.330 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 22.78 MPa
@Strain 0.550 %,
Temperature 120 °C		3304 psi
@Strain 0.550 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 23.9 MPa
@Strain 0.430 %,
Temperature 120 °C		3470 psi
@Strain 0.430 %,
Temperature 248 °F		50%RH; ISO 527
 26.3 MPa
@Strain 0.480 %,
Temperature 60.0 °C		3810 psi
@Strain 0.480 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 27.2 MPa
@Strain 0.400 %,
Temperature 90.0 °C		3950 psi
@Strain 0.400 %,
Temperature 194 °F		50%RH; ISO 527
 27.74 MPa
@Strain 0.790 %,
Temperature 150 °C		4023 psi
@Strain 0.790 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 31.04 MPa
@Strain 0.810 %,
Temperature 120 °C		4502 psi
@Strain 0.810 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 31.89 MPa
@Strain 0.710 %,
Temperature 90.0 °C		4625 psi
@Strain 0.710 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 32.2 MPa
@Strain 0.430 %,
Temperature 60.0 °C		4670 psi
@Strain 0.430 %,
Temperature 140 °F		50%RH; ISO 527
 33.98 MPa
@Strain 1.06 %,
Temperature 150 °C		4928 psi
@Strain 1.06 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 34.4 MPa
@Strain 0.410 %,
Temperature 40.0 °C		4990 psi
@Strain 0.410 %,
Temperature 104 °F		50%RH; ISO 527
 35.9 MPa
@Strain 0.390 %,
Temperature 23.0 °C		5210 psi
@Strain 0.390 %,
Temperature 73.4 °F		50%RH; ISO 527
 37.95 MPa
@Strain 0.740 %,
Temperature 60.0 °C		5504 psi
@Strain 0.740 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 37.98 MPa
@Strain 1.06 %,
Temperature 120 °C		5509 psi
@Strain 1.06 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 39.28 MPa
@Strain 1.31 %,
Temperature 150 °C		5697 psi
@Strain 1.31 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 40.12 MPa
@Strain 0.960 %,
Temperature 90.0 °C		5819 psi
@Strain 0.960 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 40.7 MPa
@Strain 0.860 %,
Temperature 120 °C		5900 psi
@Strain 0.860 %,
Temperature 248 °F		50%RH; ISO 527
 43.52 MPa
@Strain 1.30 %,
Temperature 120 °C		6312 psi
@Strain 1.30 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 43.79 MPa
@Strain 1.57 %,
Temperature 150 °C		6351 psi
@Strain 1.57 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 45.9 MPa
@Strain 0.330 %,
Temperature 0.000 °C		6660 psi
@Strain 0.330 %,
Temperature 32.0 °F		50%RH; ISO 527
 45.93 MPa
@Strain 0.820 %,
Temperature 40.0 °C		6662 psi
@Strain 0.820 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 46.1 MPa
@Strain 0.280 %,
Temperature -20.0 °C		6690 psi
@Strain 0.280 %,
Temperature -4.00 °F		50%RH; ISO 527
 46.9 MPa
@Strain 0.800 %,
Temperature 90.0 °C		6800 psi
@Strain 0.800 %,
Temperature 194 °F		50%RH; ISO 527
 47.25 MPa
@Strain 1.20 %,
Temperature 90.0 °C		6853 psi
@Strain 1.20 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 47.67 MPa
@Strain 0.780 %,
Temperature 23.0 °C		6914 psi
@Strain 0.780 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 47.71 MPa
@Strain 1.82 %,
Temperature 150 °C		6920 psi
@Strain 1.82 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 48.21 MPa
@Strain 1.00 %,
Temperature 60.0 °C		6992 psi
@Strain 1.00 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 48.59 MPa
@Strain 1.53 %,
Temperature 120 °C		7047 psi
@Strain 1.53 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 51.17 MPa
@Strain 2.07 %,
Temperature 150 °C		7422 psi
@Strain 2.07 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 52.9 MPa
@Strain 1.29 %,
Temperature 120 °C		7670 psi
@Strain 1.29 %,
Temperature 248 °F		50%RH; ISO 527
 53.15 MPa
@Strain 1.77 %,
Temperature 120 °C		7709 psi
@Strain 1.77 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 53.63 MPa
@Strain 0.490 %,
Temperature -20.0 °C		7778 psi
@Strain 0.490 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 53.9 MPa
@Strain 1.46 %,
Temperature 90.0 °C		7820 psi
@Strain 1.46 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 54.25 MPa
@Strain 2.32 %,
Temperature 150 °C		7868 psi
@Strain 2.32 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 55.7 MPa
@Strain 0.610 %,
Temperature 0.000 °C		8080 psi
@Strain 0.610 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 56.0 MPa
@Strain 0.860 %,
Temperature 60.0 °C		8120 psi
@Strain 0.860 %,
Temperature 140 °F		50%RH; ISO 527
 56.52 MPa
@Strain 1.07 %,
Temperature 40.0 °C		8198 psi
@Strain 1.07 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 57.05 MPa
@Strain 2.59 %,
Temperature 150 °C		8274 psi
@Strain 2.59 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 57.08 MPa
@Strain 1.26 %,
Temperature 60.0 °C		8279 psi
@Strain 1.26 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 57.27 MPa
@Strain 2.01 %,
Temperature 120 °C		8306 psi
@Strain 2.01 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 59.43 MPa
@Strain 2.86 %,
Temperature 150 °C		8620 psi
@Strain 2.86 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 59.55 MPa
@Strain 1.02 %,
Temperature 23.0 °C		8637 psi
@Strain 1.02 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 59.8 MPa
@Strain 1.71 %,
Temperature 90.0 °C		8670 psi
@Strain 1.71 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 60.6 MPa
@Strain 0.820 %,
Temperature 40.0 °C		8790 psi
@Strain 0.820 %,
Temperature 104 °F		50%RH; ISO 527
 61.05 MPa
@Strain 2.26 %,
Temperature 120 °C		8855 psi
@Strain 2.26 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 61.4 MPa
@Strain 1.20 %,
Temperature 90.0 °C		8910 psi
@Strain 1.20 %,
Temperature 194 °F		50%RH; ISO 527
 61.48 MPa
@Strain 3.14 %,
Temperature 150 °C		8917 psi
@Strain 3.14 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 62.0 MPa
@Strain 1.72 %,
Temperature 120 °C		8990 psi
@Strain 1.72 %,
Temperature 248 °F		50%RH; ISO 527
 63.3 MPa
@Strain 3.43 %,
Temperature 150 °C		9180 psi
@Strain 3.43 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 64.39 MPa
@Strain 2.52 %,
Temperature 120 °C		9339 psi
@Strain 2.52 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 64.5 MPa
@Strain 0.780 %,
Temperature 23.0 °C		9350 psi
@Strain 0.780 %,
Temperature 73.4 °F		50%RH; ISO 527
 64.83 MPa
@Strain 3.71 %,
Temperature 150 °C		9403 psi
@Strain 3.71 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 64.96 MPa
@Strain 1.52 %,
Temperature 60.0 °C		9422 psi
@Strain 1.52 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 65.31 MPa
@Strain 1.97 %,
Temperature 90.0 °C		9472 psi
@Strain 1.97 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 65.53 MPa
@Strain 1.32 %,
Temperature 40.0 °C		9504 psi
@Strain 1.32 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 66.14 MPa
@Strain 3.98 %,
Temperature 150 °C		9593 psi
@Strain 3.98 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 67.24 MPa
@Strain 4.29 %,
Temperature 150 °C		9752 psi
@Strain 4.29 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 67.26 MPa
@Strain 2.78 %,
Temperature 120 °C		9755 psi
@Strain 2.78 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 68.12 MPa
@Strain 4.59 %,
Temperature 150 °C		9880 psi
@Strain 4.59 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 68.77 MPa
@Strain 4.92 %,
Temperature 150 °C		9974 psi
@Strain 4.92 %,
Temperature 302 °F		DAM; ISO 11403-1/-2
 68.8 MPa
@Strain 2.15 %,
Temperature 120 °C		9980 psi
@Strain 2.15 %,
Temperature 248 °F		50%RH; ISO 527
 69.61 MPa
@Strain 1.25 %,
Temperature 23.0 °C		10100 psi
@Strain 1.25 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 69.79 MPa
@Strain 3.06 %,
Temperature 120 °C		10120 psi
@Strain 3.06 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 70.0 MPa
@Strain 2.24 %,
Temperature 90.0 °C		10200 psi
@Strain 2.24 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 71.88 MPa
@Strain 1.78 %,
Temperature 60.0 °C		10430 psi
@Strain 1.78 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 71.98 MPa
@Strain 3.34 %,
Temperature 120 °C		10440 psi
@Strain 3.34 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 72.3 MPa
@Strain 1.60 %,
Temperature 90.0 °C		10500 psi
@Strain 1.60 %,
Temperature 194 °F		50%RH; ISO 527
 73.23 MPa
@Strain 1.55 %,
Temperature 40.0 °C		10620 psi
@Strain 1.55 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 73.5 MPa
@Strain 1.29 %,
Temperature 60.0 °C		10700 psi
@Strain 1.29 %,
Temperature 140 °F		50%RH; ISO 527
 73.8 MPa
@Strain 3.64 %,
Temperature 120 °C		10700 psi
@Strain 3.64 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 74.1 MPa
@Strain 2.58 %,
Temperature 120 °C		10700 psi
@Strain 2.58 %,
Temperature 248 °F		50%RH; ISO 527
 74.2 MPa
@Strain 2.51 %,
Temperature 90.0 °C		10800 psi
@Strain 2.51 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 75.29 MPa
@Strain 3.94 %,
Temperature 120 °C		10920 psi
@Strain 3.94 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 76.52 MPa
@Strain 4.27 %,
Temperature 120 °C		11100 psi
@Strain 4.27 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 77.48 MPa
@Strain 4.58 %,
Temperature 120 °C		11240 psi
@Strain 4.58 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 77.54 MPa
@Strain 2.78 %,
Temperature 90.0 °C		11250 psi
@Strain 2.78 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 77.74 MPa
@Strain 2.03 %,
Temperature 60.0 °C		11280 psi
@Strain 2.03 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 78.12 MPa
@Strain 4.94 %,
Temperature 120 °C		11330 psi
@Strain 4.94 %,
Temperature 248 °F		DAM; ISO 11403-1/-2
 78.2 MPa
@Strain 3.01 %,
Temperature 120 °C		11300 psi
@Strain 3.01 %,
Temperature 248 °F		50%RH; ISO 527
 78.89 MPa
@Strain 1.48 %,
Temperature 23.0 °C		11440 psi
@Strain 1.48 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 80.1 MPa
@Strain 0.660 %,
Temperature 0.000 °C		11600 psi
@Strain 0.660 %,
Temperature 32.0 °F		50%RH; ISO 527
 80.22 MPa
@Strain 3.04 %,
Temperature 90.0 °C		11630 psi
@Strain 3.04 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 80.33 MPa
@Strain 1.78 %,
Temperature 40.0 °C		11650 psi
@Strain 1.78 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 80.4 MPa
@Strain 1.23 %,
Temperature 40.0 °C		11700 psi
@Strain 1.23 %,
Temperature 104 °F		50%RH; ISO 527
 80.6 MPa
@Strain 2.00 %,
Temperature 90.0 °C		11700 psi
@Strain 2.00 %,
Temperature 194 °F		50%RH; ISO 527
 81.4 MPa
@Strain 3.44 %,
Temperature 120 °C		11800 psi
@Strain 3.44 %,
Temperature 248 °F		50%RH; ISO 527
 82.59 MPa
@Strain 3.33 %,
Temperature 90.0 °C		11980 psi
@Strain 3.33 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 82.6 MPa
@Strain 0.560 %,
Temperature -20.0 °C		12000 psi
@Strain 0.560 %,
Temperature -4.00 °F		50%RH; ISO 527
 82.66 MPa
@Strain 2.27 %,
Temperature 60.0 °C		11990 psi
@Strain 2.27 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 83.9 MPa
@Strain 3.87 %,
Temperature 120 °C		12200 psi
@Strain 3.87 %,
Temperature 248 °F		50%RH; ISO 527
 84.4 MPa
@Strain 3.63 %,
Temperature 90.0 °C		12200 psi
@Strain 3.63 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 85.8 MPa
@Strain 4.30 %,
Temperature 120 °C		12400 psi
@Strain 4.30 %,
Temperature 248 °F		50%RH; Break; ISO 527
 85.89 MPa
@Strain 3.93 %,
Temperature 90.0 °C		12460 psi
@Strain 3.93 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 86.4 MPa
@Strain 1.72 %,
Temperature 60.0 °C		12500 psi
@Strain 1.72 %,
Temperature 140 °F		50%RH; ISO 527
 86.61 MPa
@Strain 2.02 %,
Temperature 40.0 °C		12560 psi
@Strain 2.02 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 86.9 MPa
@Strain 2.40 %,
Temperature 90.0 °C		12600 psi
@Strain 2.40 %,
Temperature 194 °F		50%RH; ISO 527
 87.0 MPa
@Strain 1.17 %,
Temperature 23.0 °C		12600 psi
@Strain 1.17 %,
Temperature 73.4 °F		50%RH; ISO 527
 87.03 MPa
@Strain 4.24 %,
Temperature 90.0 °C		12620 psi
@Strain 4.24 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 87.08 MPa
@Strain 2.53 %,
Temperature 60.0 °C		12630 psi
@Strain 2.53 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 87.83 MPa
@Strain 1.74 %,
Temperature 23.0 °C		12740 psi
@Strain 1.74 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 87.88 MPa
@Strain 4.54 %,
Temperature 90.0 °C		12750 psi
@Strain 4.54 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 88.27 MPa
@Strain 1.04 %,
Temperature 0.000 °C		12800 psi
@Strain 1.04 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 88.44 MPa
@Strain 4.89 %,
Temperature 90.0 °C		12830 psi
@Strain 4.89 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 88.6 MPa
@Strain 5.25 %,
Temperature 90.0 °C		12900 psi
@Strain 5.25 %,
Temperature 194 °F		DAM; ISO 11403-1/-2
 90.64 MPa
@Strain 2.76 %,
Temperature 60.0 °C		13150 psi
@Strain 2.76 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 91.7 MPa
@Strain 2.80 %,
Temperature 90.0 °C		13300 psi
@Strain 2.80 %,
Temperature 194 °F		50%RH; ISO 527
 92.01 MPa
@Strain 2.24 %,
Temperature 40.0 °C		13340 psi
@Strain 2.24 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 93.84 MPa
@Strain 3.03 %,
Temperature 60.0 °C		13610 psi
@Strain 3.03 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 95.3 MPa
@Strain 1.64 %,
Temperature 40.0 °C		13800 psi
@Strain 1.64 %,
Temperature 104 °F		50%RH; ISO 527
 95.4 MPa
@Strain 3.20 %,
Temperature 90.0 °C		13800 psi
@Strain 3.20 %,
Temperature 194 °F		50%RH; ISO 527
 95.9 MPa
@Strain 2.15 %,
Temperature 60.0 °C		13900 psi
@Strain 2.15 %,
Temperature 140 °F		50%RH; ISO 527
 95.98 MPa
@Strain 1.99 %,
Temperature 23.0 °C		13920 psi
@Strain 1.99 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 96.47 MPa
@Strain 3.32 %,
Temperature 60.0 °C		13990 psi
@Strain 3.32 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 96.81 MPa
@Strain 0.930 %,
Temperature -20.0 °C		14040 psi
@Strain 0.930 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 97.1 MPa
@Strain 2.47 %,
Temperature 40.0 °C		14100 psi
@Strain 2.47 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 98.1 MPa
@Strain 3.60 %,
Temperature 90.0 °C		14200 psi
@Strain 3.60 %,
Temperature 194 °F		50%RH; ISO 527
 98.54 MPa
@Strain 3.63 %,
Temperature 60.0 °C		14290 psi
@Strain 3.63 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 99.59 MPa
@Strain 1.22 %,
Temperature 0.000 °C		14440 psi
@Strain 1.22 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 100 MPa
@Strain 4.00 %,
Temperature 90.0 °C		14500 psi
@Strain 4.00 %,
Temperature 194 °F		50%RH; Break; ISO 527
 100.09 MPa
@Strain 3.94 %,
Temperature 60.0 °C		14517 psi
@Strain 3.94 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 101.22 MPa
@Strain 4.26 %,
Temperature 60.0 °C		14681 psi
@Strain 4.26 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 101.42 MPa
@Strain 2.71 %,
Temperature 40.0 °C		14710 psi
@Strain 2.71 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 101.91 MPa
@Strain 4.61 %,
Temperature 60.0 °C		14781 psi
@Strain 4.61 %,
Temperature 140 °F		DAM; ISO 11403-1/-2
 103 MPa
@Strain 2.58 %,
Temperature 60.0 °C		14900 psi
@Strain 2.58 %,
Temperature 140 °F		50%RH; ISO 527
 103.48 MPa
@Strain 2.25 %,
Temperature 23.0 °C		15009 psi
@Strain 2.25 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 105 MPa
@Strain 1.56 %,
Temperature 23.0 °C		15200 psi
@Strain 1.56 %,
Temperature 73.4 °F		50%RH; ISO 527
 105.32 MPa
@Strain 2.96 %,
Temperature 40.0 °C		15275 psi
@Strain 2.96 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 106 MPa
@Strain 0.990 %,
Temperature 0.000 °C		15400 psi
@Strain 0.990 %,
Temperature 32.0 °F		50%RH; ISO 527
 106 MPa
@Strain 2.05 %,
Temperature 40.0 °C		15400 psi
@Strain 2.05 %,
Temperature 104 °F		50%RH; ISO 527
 108 MPa
@Strain 3.01 %,
Temperature 60.0 °C		15700 psi
@Strain 3.01 %,
Temperature 140 °F		50%RH; ISO 527
 108.51 MPa
@Strain 3.23 %,
Temperature 40.0 °C		15738 psi
@Strain 3.23 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 109.64 MPa
@Strain 2.50 %,
Temperature 23.0 °C		15902 psi
@Strain 2.50 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 109.93 MPa
@Strain 1.40 %,
Temperature 0.000 °C		15944 psi
@Strain 1.40 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 111 MPa
@Strain 3.44 %,
Temperature 60.0 °C		16100 psi
@Strain 3.44 %,
Temperature 140 °F		50%RH; ISO 527
 111.1 MPa
@Strain 3.51 %,
Temperature 40.0 °C		16110 psi
@Strain 3.51 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 112 MPa
@Strain 0.840 %,
Temperature -20.0 °C		16200 psi
@Strain 0.840 %,
Temperature -4.00 °F		50%RH; ISO 527
 112.03 MPa
@Strain 1.10 %,
Temperature -20.0 °C		16249 psi
@Strain 1.10 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 113 MPa
@Strain 3.87 %,
Temperature 60.0 °C		16400 psi
@Strain 3.87 %,
Temperature 140 °F		50%RH; ISO 527
 113.13 MPa
@Strain 3.80 %,
Temperature 40.0 °C		16408 psi
@Strain 3.80 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 114.69 MPa
@Strain 4.16 %,
Temperature 40.0 °C		16634 psi
@Strain 4.16 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 114.76 MPa
@Strain 2.74 %,
Temperature 23.0 °C		16645 psi
@Strain 2.74 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 115 MPa
@Strain 2.46 %,
Temperature 40.0 °C		16700 psi
@Strain 2.46 %,
Temperature 104 °F		50%RH; ISO 527
 115 MPa
@Strain 4.30 %,
Temperature 60.0 °C		16700 psi
@Strain 4.30 %,
Temperature 140 °F		50%RH; Break; ISO 527
 115.62 MPa
@Strain 4.49 %,
Temperature 40.0 °C		16769 psi
@Strain 4.49 %,
Temperature 104 °F		DAM; ISO 11403-1/-2
 118 MPa
@Strain 1.95 %,
Temperature 23.0 °C		17100 psi
@Strain 1.95 %,
Temperature 73.4 °F		50%RH; ISO 527
 118.78 MPa
@Strain 1.57 %,
Temperature 0.000 °C		17228 psi
@Strain 1.57 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 119.04 MPa
@Strain 2.95 %,
Temperature 23.0 °C		17265 psi
@Strain 2.95 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 120 MPa
@Strain 2.87 %,
Temperature 40.0 °C		17400 psi
@Strain 2.87 %,
Temperature 104 °F		50%RH; ISO 527
 122.94 MPa
@Strain 3.19 %,
Temperature 23.0 °C		17831 psi
@Strain 3.19 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 124 MPa
@Strain 3.28 %,
Temperature 40.0 °C		18000 psi
@Strain 3.28 %,
Temperature 104 °F		50%RH; ISO 527
 126.11 MPa
@Strain 3.45 %,
Temperature 23.0 °C		18291 psi
@Strain 3.45 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 127 MPa
@Strain 3.69 %,
Temperature 40.0 °C		18400 psi
@Strain 3.69 %,
Temperature 104 °F		50%RH; ISO 527
 127 MPa
@Strain 1.32 %,
Temperature 0.000 °C		18400 psi
@Strain 1.32 %,
Temperature 32.0 °F		50%RH; ISO 527
 127.15 MPa
@Strain 1.75 %,
Temperature 0.000 °C		18442 psi
@Strain 1.75 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 128 MPa
@Strain 2.34 %,
Temperature 23.0 °C		18600 psi
@Strain 2.34 %,
Temperature 73.4 °F		50%RH; ISO 527
 128.58 MPa
@Strain 3.71 %,
Temperature 23.0 °C		18649 psi
@Strain 3.71 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 129 MPa
@Strain 4.10 %,
Temperature 40.0 °C		18700 psi
@Strain 4.10 %,
Temperature 104 °F		50%RH; Break; ISO 527
 130.45 MPa
@Strain 4.02 %,
Temperature 23.0 °C		18920 psi
@Strain 4.02 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 131.76 MPa
@Strain 4.35 %,
Temperature 23.0 °C		19110 psi
@Strain 4.35 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 132.46 MPa
@Strain 4.69 %,
Temperature 23.0 °C		19212 psi
@Strain 4.69 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 132.52 MPa
@Strain 5.07 %,
Temperature 23.0 °C		19220 psi
@Strain 5.07 %,
Temperature 73.4 °F		DAM; ISO 11403-1/-2
 134.55 MPa
@Strain 1.91 %,
Temperature 0.000 °C		19515 psi
@Strain 1.91 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 136 MPa
@Strain 2.73 %,
Temperature 23.0 °C		19700 psi
@Strain 2.73 %,
Temperature 73.4 °F		50%RH; ISO 527
 136.97 MPa
@Strain 1.44 %,
Temperature -20.0 °C		19866 psi
@Strain 1.44 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 137 MPa
@Strain 1.12 %,
Temperature -20.0 °C		19900 psi
@Strain 1.12 %,
Temperature -4.00 °F		50%RH; ISO 527
 141.47 MPa
@Strain 2.08 %,
Temperature 0.000 °C		20519 psi
@Strain 2.08 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 142 MPa
@Strain 1.65 %,
Temperature 0.000 °C		20600 psi
@Strain 1.65 %,
Temperature 32.0 °F		50%RH; ISO 527
 142 MPa
@Strain 3.12 %,
Temperature 23.0 °C		20600 psi
@Strain 3.12 %,
Temperature 73.4 °F		50%RH; ISO 527
 146 MPa
@Strain 3.51 %,
Temperature 23.0 °C		21200 psi
@Strain 3.51 %,
Temperature 73.4 °F		50%RH; ISO 527
 148.23 MPa
@Strain 2.26 %,
Temperature 0.000 °C		21499 psi
@Strain 2.26 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 148.47 MPa
@Strain 1.60 %,
Temperature -20.0 °C		21534 psi
@Strain 1.60 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 149 MPa
@Strain 3.90 %,
Temperature 23.0 °C		21600 psi
@Strain 3.90 %,
Temperature 73.4 °F		50%RH; Break; ISO 527
 154.33 MPa
@Strain 2.44 %,
Temperature 0.000 °C		22384 psi
@Strain 2.44 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 155 MPa
@Strain 1.98 %,
Temperature 0.000 °C		22500 psi
@Strain 1.98 %,
Temperature 32.0 °F		50%RH; ISO 527
 158 MPa
@Strain 1.40 %,
Temperature -20.0 °C		22900 psi
@Strain 1.40 %,
Temperature -4.00 °F		50%RH; ISO 527
 158.26 MPa
@Strain 1.76 %,
Temperature -20.0 °C		22954 psi
@Strain 1.76 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 160.24 MPa
@Strain 2.63 %,
Temperature 0.000 °C		23241 psi
@Strain 2.63 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 165 MPa
@Strain 2.31 %,
Temperature 0.000 °C		23900 psi
@Strain 2.31 %,
Temperature 32.0 °F		50%RH; ISO 527
 165.78 MPa
@Strain 2.83 %,
Temperature 0.000 °C		24044 psi
@Strain 2.83 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 167.61 MPa
@Strain 1.93 %,
Temperature -20.0 °C		24310 psi
@Strain 1.93 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 170.72 MPa
@Strain 3.05 %,
Temperature 0.000 °C		24761 psi
@Strain 3.05 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 173 MPa
@Strain 2.64 %,
Temperature 0.000 °C		25100 psi
@Strain 2.64 %,
Temperature 32.0 °F		50%RH; ISO 527
 174.99 MPa
@Strain 3.26 %,
Temperature 0.000 °C		25380 psi
@Strain 3.26 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 176 MPa
@Strain 1.68 %,
Temperature -20.0 °C		25500 psi
@Strain 1.68 %,
Temperature -4.00 °F		50%RH; ISO 527
 176.15 MPa
@Strain 2.10 %,
Temperature -20.0 °C		25548 psi
@Strain 2.10 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 177.89 MPa
@Strain 3.57 %,
Temperature 0.000 °C		25801 psi
@Strain 3.57 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 178.67 MPa
@Strain 3.94 %,
Temperature 0.000 °C		25914 psi
@Strain 3.94 %,
Temperature 32.0 °F		DAM; ISO 11403-1/-2
 179 MPa
@Strain 2.97 %,
Temperature 0.000 °C		26000 psi
@Strain 2.97 %,
Temperature 32.0 °F		50%RH; ISO 527
 183.81 MPa
@Strain 2.26 %,
Temperature -20.0 °C		26659 psi
@Strain 2.26 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 184 MPa
@Strain 3.30 %,
Temperature 0.000 °C		26700 psi
@Strain 3.30 %,
Temperature 32.0 °F		50%RH; Break; ISO 527
 190.98 MPa
@Strain 2.43 %,
Temperature -20.0 °C		27699 psi
@Strain 2.43 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 192 MPa
@Strain 1.96 %,
Temperature -20.0 °C		27800 psi
@Strain 1.96 %,
Temperature -4.00 °F		50%RH; ISO 527
 197.77 MPa
@Strain 2.60 %,
Temperature -20.0 °C		28684 psi
@Strain 2.60 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 204.1 MPa
@Strain 2.77 %,
Temperature -20.0 °C		29600 psi
@Strain 2.77 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 206 MPa
@Strain 2.24 %,
Temperature -20.0 °C		29900 psi
@Strain 2.24 %,
Temperature -4.00 °F		50%RH; ISO 527
 210.13 MPa
@Strain 2.97 %,
Temperature -20.0 °C		30477 psi
@Strain 2.97 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 215.49 MPa
@Strain 3.18 %,
Temperature -20.0 °C		31254 psi
@Strain 3.18 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 219 MPa
@Strain 2.52 %,
Temperature -20.0 °C		31800 psi
@Strain 2.52 %,
Temperature -4.00 °F		50%RH; ISO 527
 219.69 MPa
@Strain 3.39 %,
Temperature -20.0 °C		31863 psi
@Strain 3.39 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 220.9 MPa
@Strain 3.75 %,
Temperature -20.0 °C		32040 psi
@Strain 3.75 %,
Temperature -4.00 °F		DAM; ISO 11403-1/-2
 230 MPa
@Strain 2.80 %,
Temperature -20.0 °C		33400 psi
@Strain 2.80 %,
Temperature -4.00 °F		50%RH; Break; ISO 527
Elongation at Break  3.2 %
@Temperature 23.0 °C		3.2 %
@Temperature 73.4 °F		DAM; ISO 527
 4.6 %
@Temperature 23.0 °C		4.6 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  8.30 GPa
@Temperature 23.0 °C		1200 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 11.2 GPa
@Temperature 23.0 °C		1620 ksi
@Temperature 73.4 °F		DAM; ISO 527
Flexural Strength  210 MPa
@Temperature 23.0 °C		30500 psi
@Temperature 73.4 °F		50%RH; ISO 178
 300 MPa
@Temperature 23.0 °C		43500 psi
@Temperature 73.4 °F		DAM; ISO 178
Izod Impact, Notched (ISO)  10.0 kJ/m²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 180/1A
 10.0 kJ/m²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 180/1A
 12.0 kJ/m²
@Temperature 23.0 °C		5.71 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 15.0 kJ/m²
@Temperature 23.0 °C		7.14 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Charpy Impact Unnotched  7.50 J/cm²
@Temperature -30.0 °C		35.7 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eU
 8.00 J/cm²
@Temperature -30.0 °C		38.1 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eU
 9.00 J/cm²
@Temperature 23.0 °C		42.8 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eU
 10.0 J/cm²
@Temperature 23.0 °C		47.6 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eU
Charpy Impact, Notched  1.00 J/cm²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eA
 1.00 J/cm²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eA
 1.50 J/cm²
@Temperature 23.0 °C		7.14 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 1.80 J/cm²
@Temperature 23.0 °C		8.57 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour 8400 MPa
@Temperature 23.0 °C		1.22e+6 psi
@Temperature 73.4 °F		50%RH; ISO 899
Tensile Creep Modulus, 1000 hours 6000 MPa
@Temperature 23.0 °C		870000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity  1.00e+11 ohm-cm
@Temperature 23.0 °C		1.00e+11 ohm-cm
@Temperature 73.4 °F		50%RH; IEC 60093
 >= 1.00e+15 ohm-cm
@Temperature 23.0 °C		>= 1.00e+15 ohm-cm
@Temperature 73.4 °F		DAM; IEC 60093
 1.00e+17 ohm-cm
@Temperature 23.0 °C		1.00e+17 ohm-cm
@Temperature 73.4 °F		DAM; IEC 60093
Surface Resistance  1.00e+13 ohm
@Temperature 23.0 °C		1.00e+13 ohm
@Temperature 73.4 °F		50%RH; IEC 60093
 >= 1.00e+15 ohm
@Temperature 23.0 °C		>= 1.00e+15 ohm
@Temperature 73.4 °F		DAM; IEC 60093
Dielectric Constant  4.1
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		4.1
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 4.7
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		4.7
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Dissipation Factor  0.014
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.014
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 0.062
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.062
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Comparative Tracking Index 400 V
@Temperature 23.0 °C		400 V
@Temperature 73.4 °F		DAM; IEC 60112
 250 V
@Thickness 3.00 mm,
Temperature 23.0 °C		250 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 250 - 400 V
@Thickness 3.00 mm,
Temperature 23.0 °C		250 - 400 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  100 µm/m-°C
@Temperature 23.0 - 55.0 °C		55.6 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 100 µm/m-°C
@Temperature 23.0 - 55.0 °C		55.6 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
Deflection Temperature at 0.46 MPa (66 psi) 261 °C502 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 252 °C486 °FDAM; ISO 75-1/-2
Glass Transition Temp, Tg 80.0 °C176 °F10°C/min; DAM; ISO 11357-1/-2
UL RTI, Electrical  140 °C
@Thickness 3.00 mm		284 °F
@Thickness 0.118 in		DAM; UL 746B
 140 °C
@Thickness 0.710 mm		284 °F
@Thickness 0.0280 in		DAM; UL 746B
 140 °C
@Thickness 1.50 mm		284 °F
@Thickness 0.0591 in		DAM; UL 746B
UL RTI, Mechanical with Impact  125 °C
@Thickness 0.710 mm		257 °F
@Thickness 0.0280 in		DAM; UL 746B
 125 °C
@Thickness 1.50 mm		257 °F
@Thickness 0.0591 in		DAM; UL 746B
 125 °C
@Thickness 3.00 mm		257 °F
@Thickness 0.118 in		DAM; UL 746B
UL RTI, Mechanical without Impact  140 °C
@Thickness 0.710 mm		284 °F
@Thickness 0.0280 in		DAM; UL 746B
 140 °C
@Thickness 3.00 mm		284 °F
@Thickness 0.118 in		DAM; UL 746B
 140 °C
@Thickness 1.50 mm		284 °F
@Thickness 0.0591 in		DAM; UL 746B
Flammability, UL94  HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; IEC 60695-11-10
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 HB
@Thickness 0.710 mm		HB
@Thickness 0.0280 in		DAM; IEC 60695-11-10
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; UL94
 HB
@Thickness 0.710 mm		HB
@Thickness 0.0280 in		DAM; UL94
 HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; UL94
Oxygen Index 24 %24 %DAM; ISO 4589-1/-2
 
Processing PropertiesMetricEnglishComments
Melt Temperature 262 °C504 °F10°C/min; DAM; ISO 11357-1/-3
 295 °C563 °FDAM; Optimum
 285 - 305 °C545 - 581 °FDAM
Mold Temperature 70.0 - 120 °C158 - 248 °FDAM
 100 °C212 °FDAM; optimum
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveHeat StabilizerDAM
AppearanceNatural ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesChemical Resistance, GoodDAM
 Creep Resistance, GoodDAM
 Fatigue ResistantDAM
 Fuel ResistantDAM
 Grease ResistantDAM
 Heat Aging Resistance, GoodDAM
 Heat StabilizedDAM
 Oil ResistantDAM
 Stiffness, HighDAM
 Strength, HighDAM
 Thermal Aging Resistance, GoodDAM
FillerGlass fiber reinforcementDAM
FormsPelletsDAM
GenericNylon 66DAM
Heat StabilizedYesDAM
Material StatusCurrentDAM
Part Marking Code>PA66-GF35<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryGlass Reinforced ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66-GF35ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
Ultrasonic WeldableYesDAM
UsesAppliance ComponentsDAM
 Automotive ApplicationsDAM
 Electrical/Electronic ApplicationsDAM
 Industrial ApplicationsDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45485.html

免责声明: 本文 DuPont Performance Polymers Zytel® 70G35HSL NC010 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4