DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)

DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry) 物性表: DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)物性表及特性介绍,DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)注塑参数详情,如需DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry)下载, 可到相关下载区下载
  • 熔体流动速率 [g/10min]: 33.66
  • 密度 [g/cm3]: 1.53
  • 吸水率 [%]: 6.2
  • 热变形温度 [℃]: 205.0
 
Physical PropertiesMetricEnglishComments
Density 1.53 g/cc0.0553 lb/in³ISO 1183
Water Absorption 6.2 %6.2 %Sim. to ISO 62
Moisture Absorption at Equilibrium 1.7 %1.7 %Humidity Absorption; Sim. to ISO 62
Melt Flow 33.66 g/10 min
@Load 2.16 kg,
Temperature 250 °C
33.66 g/10 min
@Load 4.76 lb,
Temperature 482 °F
Calculated from Volume Flow Rate of 22 cm3/10min.; ISO 1133
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 70.0 MPa10200 psiISO 527-1/-2
Elongation at Break 2.5 %2.5 %ISO 527-1/-2
Tensile Modulus 8.00 GPa1160 ksiISO 527-1/-2
Charpy Impact Unnotched  3.50 J/cm²
@Temperature -30.0 °C
16.7 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 3.50 J/cm²
@Temperature 23.0 °C
16.7 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  0.500 J/cm²
@Temperature -30.0 °C
2.38 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 0.500 J/cm²
@Temperature 23.0 °C
2.38 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmIEC 60093
Dielectric Constant  3.2
@Frequency 1e+6 Hz
3.2
@Frequency 1e+6 Hz
IEC 60250
 3.6
@Frequency 100 Hz
3.6
@Frequency 100 Hz
IEC 60250
Dielectric Strength 30.0 kV/mm762 kV/inIEC 60243-1
Dissipation Factor  0.0085
@Frequency 100 Hz
0.0085
@Frequency 100 Hz
IEC 60250
 0.014
@Frequency 1e+6 Hz
0.014
@Frequency 1e+6 Hz
IEC 60250
Comparative Tracking Index 250 - 399 V250 - 399 VPLC 2; UL 746A
 375 V375 VIEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 50.0 µm/m-°C
@Temperature 20.0 °C
27.8 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 50.0 µm/m-°C
@Temperature 20.0 °C
27.8 µin/in-°F
@Temperature 68.0 °F
ISO 11359-1/-2
Melting Point 220 °C428 °F10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi) 205 °C401 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 145 °C293 °FISO 75-1/-2
UL RTI, Electrical  140 °C
@Thickness 1.50 mm
284 °F
@Thickness 0.0591 in
UL746B
 140 °C
@Thickness 3.00 mm
284 °F
@Thickness 0.118 in
UL746B
UL RTI, Mechanical with Impact  110 °C
@Thickness 1.50 mm
230 °F
@Thickness 0.0591 in
UL746B
 110 °C
@Thickness 3.00 mm
230 °F
@Thickness 0.118 in
UL746B
UL RTI, Mechanical without Impact  140 °C
@Thickness 1.50 mm
284 °F
@Thickness 0.0591 in
UL746B
 140 °C
@Thickness 3.00 mm
284 °F
@Thickness 0.118 in
UL746B
Flammability, UL94  V-2
@Thickness 1.60 mm
V-2
@Thickness 0.0630 in
IEC 60695-11-10
 V-0
@Thickness 3.00 mm
V-0
@Thickness 0.118 in
IEC 60695-11-10
Glow Wire Test  725 °C
@Thickness 0.750 mm
1340 °F
@Thickness 0.0295 in
Glow Wire Ignition Temperature; IEC 60695-2-13
 775 °C
@Thickness 3.00 mm
1430 °F
@Thickness 0.118 in
Glow Wire Ignition Temperature; IEC 60695-2-13
 960 °C
@Thickness 0.750 mm
1760 °F
@Thickness 0.0295 in
Glow Wire Flammability Index; IEC 60695-2-12
 960 °C
@Thickness 3.00 mm
1760 °F
@Thickness 0.118 in
Glow Wire Flammability Index; IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 220 °C428 °F10°C/min; ISO 11357-1/-3
 
Descriptive Properties
Flame RetardantYes
Flame Retarding AgentYes
Heat Stabilized or Stable to HeatYes
Injection MoldingYes
Release AgentYes
With FillersYes

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46654.html

免责声明: 本文 DSM Akulon® K223-KMV6 (GREY) Nylon 6-30% Mineral Reinforced (European and Asian Grade) (Dry) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4