EMS-Grivory Grilamid L 25 NZ ESD PA12

EMS-Grivory Grilamid L 25 NZ ESD PA12 物性表: EMS-Grivory Grilamid L 25 NZ ESD PA12物性表及特性介绍,EMS-Grivory Grilamid L 25 NZ ESD PA12注塑参数详情,如需EMS-Grivory Grilamid L 25 NZ ESD PA12下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.02
  • 吸水率 [%]: 1.1
  • 拉伸强度 [MPa]: 35.0
  • 热变形温度 [℃]: 95.0
 
Physical PropertiesMetricEnglishComments
Density 1.02 g/cc0.0368 lb/in³ISO 1183
Water Absorption 1.1 %1.1 %ISO 62
Moisture Absorption 0.600 %0.600 %ISO 62
Linear Mold Shrinkage, Flow 0.011 cm/cm0.011 in/inISO 294-4, 2577
Linear Mold Shrinkage, Transverse 0.014 cm/cm0.014 in/inISO 294-4, 2577
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 40.0 MPa5800 psiconditioned; ISO 527-1/-2
Tensile Strength, Yield 35.0 MPa5080 psi
Elongation at Break >= 50 %>= 50 %conditioned; ISO 527-1/-2
 >= 50 %>= 50 %dry; ISO 527-1/-2
Elongation at Yield 12 %12 %conditioned; ISO 527-1/-2
Tensile Modulus 1.00 GPa145 ksiconditioned; ISO 527-1/-2
Charpy Impact, Notched 8.00 J/cm²38.1 ft-lb/in²conditioned; ISO 179/1eA
 2.00 J/cm²
@Temperature 30.0 °C
9.52 ft-lb/in²
@Temperature 86.0 °F
conditioned; ISO 179/1eU
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 10000 ohm-cm10000 ohm-cmconditioned; IEC 60093
Surface Resistance 1.00e+6 ohm1.00e+6 ohmIEC 60093
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 130 µm/m-°C72.2 µin/in-°FISO 11359-1/-2
CTE, linear, Transverse to Flow 150 µm/m-°C83.3 µin/in-°FISO 11359-1/-2
Melting Point 178 °C352 °F10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air 90.0 - 110 °C194 - 230 °Flong term; EMS
 150 °C302 °Fshort term; EMS
Deflection Temperature at 0.46 MPa (66 psi) 95.0 °C203 °FISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 45.0 °C113 °FISO 75-1/-2
Flammability, UL94 HBHBIEC 60695-11-10
 
Descriptive Properties
AutomotiveAutomotive electr. and electronics, lighting
 Fuel systems
Electricals & ElectronicsCables & Tubes
FormGranules
Industry & Consumer goodsHydraulics & Pneumatics
ProcessingOther Extrusion
Product AttributesHigh viscosity
Special CharacteristicsAnti-static
 High impact or impact modified
 Improved heat resistance
 Improved UV resistance (outdoor use)

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-46887.html

免责声明: 本文 EMS-Grivory Grilamid L 25 NZ ESD PA12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4