Evonik Corporation Vestamid® E47-S3 Heat & Light Stabilized Nylon 12/PEBA Elastomer

Evonik Corporation Vestamid® E47-S3 Heat & Light Stabilized Nylon 12/PEBA Elastomer 物性表: Evonik Corporation Vestamid® E47-S3 Heat & Light Stabilized Nylon 12/PEBA Elastomer物性表及特性介绍,Evonik Corporation Vestamid® E47-S3 Heat & Light Stabilized Nylon 12/PEBA Elastomer注塑参数详情,如需Evonik Corporation Vestamid® E47-S3 Heat & Light Stabilized Nylon 12/PEBA Elastomer下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.02
  • 吸水率 [%]: 1.0
  • 热变形温度 [℃]: 65.0
 
Physical PropertiesMetricEnglishComments
Density 1.02 g/cc0.0368 lb/in³ISO 1183
Water Absorption at Saturation 1.0 %1.0 %ISO 62
Viscosity Test 190 cm³/g190 cm³/gViscosity Number; ISO 307
Linear Mold Shrinkage 0.0060 - 0.010 cm/cm
@Thickness 3.00 mm
0.0060 - 0.010 in/in
@Thickness 0.118 in
sheet with film gate at rim, mold temperature 80°C
Linear Mold Shrinkage, Transverse 0.0090 - 0.015 cm/cm
@Thickness 3.00 mm
0.0090 - 0.015 in/in
@Thickness 0.118 in
sheet with film gate at rim, mold temperature 80°C
 
Mechanical PropertiesMetricEnglishComments
Hardness, Shore D 4747ISO 868
Tensile Strength at Break 23.0 MPa3340 psiISO 527-1, ISO 527-2
Elongation at Break >= 200 %>= 200 %ISO 527-1, ISO 527-2
Tensile Modulus 0.120 GPa17.4 ksiISO 527-1, ISO 527-2
50% Modulus 0.0120 GPa1.74 ksiISO 527-1, ISO 527-2
Charpy Impact Unnotched  NB
@Temperature -30.0 °C
NB
@Temperature -22.0 °F
ISO 179/1eU
 NB
@Temperature 23.0 °C
NB
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  NB
@Temperature -30.0 °C
NB
@Temperature -22.0 °F
ISO 179/1eA
 NB
@Temperature 23.0 °C
NB
@Temperature 73.4 °F
ISO 179/1eA
Tensile Creep Modulus, 1000 hours 90.0 MPa13100 psiISO 899-1
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+11 ohm-cm1.00e+11 ohm-cmSpec.; IEC 60093
Surface Resistance 1.00e+13 ohm1.00e+13 ohmSpec.; IEC 60093
Dielectric Constant  4.7
@Frequency 1e+6 Hz
4.7
@Frequency 1e+6 Hz
IEC 60250
 8.5
@Frequency 100 Hz
8.5
@Frequency 100 Hz
IEC 60250
Dielectric Strength 37.0 kV/mm940 kV/inK20/P50; IEC 60243-1
Dissipation Factor  0.12
@Frequency 100 Hz
0.12
@Frequency 100 Hz
IEC 60250
 0.13
@Frequency 1e+6 Hz
0.13
@Frequency 1e+6 Hz
IEC 60250
Comparative Tracking Index 600 V600 VTest Solution A; IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear 230 µm/m-°C
@Temperature 23.0 - 55.0 °C
128 µin/in-°F
@Temperature 73.4 - 131 °F
Longitudinal; ISO 11359
CTE, linear, Transverse to Flow 210 µm/m-°C
@Temperature 23.0 - 55.0 °C
117 µin/in-°F
@Temperature 73.4 - 131 °F
ISO 11359
Deflection Temperature at 0.46 MPa (66 psi) 65.0 °C149 °FISO 75-2
Deflection Temperature at 1.8 MPa (264 psi) 45.0 °C113 °FISO 75-1
Vicat Softening Point 70.0 °C158 °F50N; ISO 306
 140 °C284 °F10N; ISO 306
Flammability, UL94 HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47023.html

免责声明: 本文 Evonik Corporation Vestamid® E47-S3 Heat & Light Stabilized Nylon 12/PEBA Elastomer 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4