Evonik Corporation Vestamid® L1930 30% Glass Bead Filled Nylon 12

Evonik Corporation Vestamid® L1930 30% Glass Bead Filled Nylon 12 物性表: Evonik Corporation Vestamid® L1930 30% Glass Bead Filled Nylon 12物性表及特性介绍,Evonik Corporation Vestamid® L1930 30% Glass Bead Filled Nylon 12注塑参数详情,如需Evonik Corporation Vestamid® L1930 30% Glass Bead Filled Nylon 12下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.24
  • 吸水率 [%]: 1.1
  • 拉伸强度 [MPa]: 69.0
  • 热变形温度 [℃]: 170.0
 
Physical PropertiesMetricEnglishComments
Density 1.24 g/cc0.0448 lb/in³ISO 1183
Moisture Absorption at Equilibrium 0.50 %
@Thickness 1.00 mm,
Temperature 23.0 °C
0.50 %
@Thickness 0.0394 in,
Temperature 73.4 °F
50% R.H.; ISO 62
Water Absorption at Saturation 1.1 %
@Thickness 1.00 mm
1.1 %
@Thickness 0.0394 in
ISO 62
Linear Mold Shrinkage 0.0030 cm/cm0.0030 in/in127x12.7x3.2 mm (processing cond. acc. To ISO 1874-2)
Linear Mold Shrinkage, Transverse 0.0070 cm/cm0.0070 in/in127x12.7x3.2 mm (processing cond. acc. To ISO 1874-2)
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 60.0 MPa8700 psiISO 527-1/2
Tensile Strength, Yield 69.0 MPa10000 psiISO 527-1/2
Elongation at Break 10 %10 %ISO 527-1/2
Elongation at Yield 4.0 %4.0 %ISO 527-1/2
Tensile Modulus 4.00 GPa580 ksiISO 527-1/2
Charpy Impact Unnotched  6.50 J/cm²
@Temperature -30.0 °C
30.9 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eU
 7.00 J/cm²
@Temperature 23.0 °C
33.3 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eU
Charpy Impact, Notched  1.00 J/cm²
@Temperature 23.0 °C
4.76 ft-lb/in²
@Temperature 73.4 °F
ISO 179/1eA
 1.10 J/cm²
@Temperature -30.0 °C
5.24 ft-lb/in²
@Temperature -22.0 °F
ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity 1.00e+15 ohm-cm1.00e+15 ohm-cmIEC 60093
Dielectric Constant  3.4
@Frequency 1e+6 Hz
3.4
@Frequency 1e+6 Hz
IEC 60250
 4.1
@Frequency 100 Hz
4.1
@Frequency 100 Hz
IEC 60250
Dielectric Strength 40.0 kV/mm1020 kV/inK20/P50; IEC 60243-1
Dissipation Factor  0.024
@Frequency 1e+6 Hz
0.024
@Frequency 1e+6 Hz
IEC 60250
 0.031
@Frequency 100 Hz
0.031
@Frequency 100 Hz
IEC 60250
Comparative Tracking Index >= 600 V>= 600 VTest Solution A, 50 drops; IEC 60112
 600 V600 VTest Solution A, 100 drops; IEC 60112
 
Thermal PropertiesMetricEnglishComments
CTE, linear 50.0 µm/m-°C
@Temperature 23.0 - 55.0 °C
27.8 µin/in-°F
@Temperature 73.4 - 131 °F
45x15x10 mm; ISO 11359
Melting Point 178 °C352 °FPeak Temperature; ISO 3146, ISO 11357
Deflection Temperature at 0.46 MPa (66 psi) 170 °C338 °FISO 75
Deflection Temperature at 1.8 MPa (264 psi) 130 °C266 °FISO 75
Vicat Softening Point 170 °C338 °F50N; ISO 306
 175 °C347 °F10N; ISO 306
Flammability, UL94  HB
@Thickness 1.60 mm
HB
@Thickness 0.0630 in
 HB
@Thickness 3.20 mm
HB
@Thickness 0.126 in
 
Descriptive Properties
Electrolytic CorrosionA1 StepIEC 60426

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47024.html

免责声明: 本文 Evonik Corporation Vestamid® L1930 30% Glass Bead Filled Nylon 12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4