SABIC Innovative Plastics LNP STAT-KON SD000 PA12

SABIC Innovative Plastics LNP STAT-KON SD000 PA12 物性表: SABIC Innovative Plastics LNP STAT-KON SD000 PA12物性表及特性介绍,SABIC Innovative Plastics LNP STAT-KON SD000 PA12注塑参数详情,如需SABIC Innovative Plastics LNP STAT-KON SD000 PA12下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.124
  • 缺口冲击强度: 0.35
  • 拉伸强度 [MPa]: 49.0
  • 弯曲模量 [MPa]: 1.98
  • 热变形温度 [℃]: 137.0
 
Physical PropertiesMetricEnglishComments
Specific Gravity 1.13 g/cc1.13 g/ccASTM D792
Density 1.124 g/cc0.04061 lb/in³ASTM D792
Moisture Absorption 0.150 %0.150 %50% RH, 24 hrs; ASTM D570
 0.210 %0.210 %23°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow >= 0.020 cm/cm
@Time 86400 sec
>= 0.020 in/in
@Time 24.0 hour
ASTM D955
Linear Mold Shrinkage, Transverse 0.020 - 0.040 cm/cm
@Time 86400 sec
0.020 - 0.040 in/in
@Time 24.0 hour
ASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 40.0 MPa5800 psiType I, 5 mm/min; ASTM D638
 44.0 MPa6380 psi5 mm/min; ISO 527
Tensile Strength, Yield 49.0 MPa7110 psi5 mm/min; ISO 527
 51.0 MPa7400 psiType I, 5 mm/min; ASTM D638
Elongation at Break 17.1 %17.1 %5 mm/min; ISO 527
 28.1 %28.1 %Type I, 5 mm/min; ASTM D638
Elongation at Yield 11.3 %11.3 %5 mm/min; ISO 527
 13.4 %13.4 %Type I, 5 mm/min; ASTM D638
Tensile Modulus 2.10 GPa305 ksi1 mm/min; ISO 527
 2.21 GPa321 ksi5 mm/min; ASTM D638
Flexural Strength 67.0 MPa9720 psiISO 178
Flexural Modulus 1.98 GPa287 ksi2 mm/min; ISO 178
 2.05 GPa297 ksi1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched 0.350 J/cm0.656 ft-lb/inASTM D256
Izod Impact, Unnotched 19.1 J/cm35.8 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 4.00 kJ/m²1.90 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 219 kJ/m²104 ft-lb/in²80*10*4; ISO 180/1U
Dart Drop, Total Energy 2.00 J
@Temperature 23.0 °C
1.48 ft-lb
@Temperature 73.4 °F
ASTM D3763
Impact Test 1.00 J0.738 ft-lbMultiaxial Impact; ISO 6603
 
Electrical PropertiesMetricEnglishComments
Surface Resistance 1.0 - 4.0 ohm1.0 - 4.0 ohmASTM D257
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow 99.0 µm/m-°C
@Temperature -30.0 - 30.0 °C
55.0 µin/in-°F
@Temperature -22.0 - 86.0 °F
ASTM D696
CTE, linear, Transverse to Flow 108 µm/m-°C
@Temperature -30.0 - 30.0 °C
60.0 µin/in-°F
@Temperature -22.0 - 86.0 °F
ASTM D696
Deflection Temperature at 0.46 MPa (66 psi) 137 °C279 °FFlatw 80*10*4 sp=64mm; ISO 75/Bf
 158 °C
@Thickness 3.20 mm
316 °F
@Thickness 0.126 in
unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 61.0 °C142 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 96.0 °C
@Thickness 3.20 mm
205 °F
@Thickness 0.126 in
unannealed; ASTM D648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47163.html

免责声明: 本文 SABIC Innovative Plastics LNP STAT-KON SD000 PA12 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4