SABIC Innovative Plastics LNP THERMOCOMP SF00A PA12 (Asia Pacific)

SABIC Innovative Plastics LNP THERMOCOMP SF00A PA12 (Asia Pacific) 物性表: SABIC Innovative Plastics LNP THERMOCOMP SF00A PA12 (Asia Pacific)物性表及特性介绍,SABIC Innovative Plastics LNP THERMOCOMP SF00A PA12 (Asia Pacific)注塑参数详情,如需SABIC Innovative Plastics LNP THERMOCOMP SF00A PA12 (Asia Pacific)下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.48
  • 缺口冲击强度: 0.97
  • 拉伸强度 [MPa]: 113.0
  • 断裂伸长率 [%]: 148
  • 弯曲模量 [MPa]: 8.93
  • 热变形温度 [℃]: 176.0
 
Physical PropertiesMetricEnglishComments
Density 1.48 g/cc0.0535 lb/in³ASTM D792
 1.48 g/cc0.0535 lb/in³ISO 1183
Linear Mold Shrinkage, Flow 0.0020 - 0.0040 cm/cm
@Time 86400 sec
0.0020 - 0.0040 in/in
@Time 24.0 hour
ASTM D955
Linear Mold Shrinkage, Transverse 0.0080 - 0.010 cm/cm
@Time 86400 sec
0.0080 - 0.010 in/in
@Time 24.0 hour
ASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 113 MPa16400 psi5 mm/min; ISO 527
 121 MPa17500 psiType I, 5 mm/min; ASTM D638
Tensile Strength, Yield 113 MPa16400 psi5 mm/min; ISO 527
 121 MPa17500 psiType I, 5 mm/min; ASTM D638
Elongation at Break 1.5 %1.5 %5 mm/min; ISO 527
 1.7 %1.7 %Type I, 5 mm/min; ASTM D638
Elongation at Yield 1.5 %1.5 %5 mm/min; ISO 527
 1.7 %1.7 %Type I, 5 mm/min; ASTM D638
Tensile Modulus 12.28 GPa1781 ksi1 mm/min; ISO 527
 12.8 GPa1860 ksi50 mm/min; ASTM D638
Flexural Strength 143 MPa20700 psibrk, 1.3 mm/min, 50 mm span; ASTM D790
Flexural Yield Strength 148 MPa21500 psi1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus 8.93 GPa1300 ksi1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched 0.970 J/cm1.82 ft-lb/inASTM D256
Izod Impact, Unnotched 5.77 J/cm10.8 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 1.00 kJ/m²0.476 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 30.0 kJ/m²14.3 ft-lb/in²80*10*4; ISO 180/1U
Impact Test 16.0 J11.8 ft-lbMultiaxial Impact; ISO 6603
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 0.46 MPa (66 psi) 176 °C
@Thickness 3.20 mm
349 °F
@Thickness 0.126 in
unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 176 °C349 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 166 °C
@Thickness 3.20 mm
331 °F
@Thickness 0.126 in
unannealed; ASTM D648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-47180.html

免责声明: 本文 SABIC Innovative Plastics LNP THERMOCOMP SF00A PA12 (Asia Pacific) 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4