- 密度 [g/cm3]: 1.05
- 吸水率 [%]: 2.7
- 拉伸强度 [MPa]: 40.0
- 热变形温度 [℃]: 115.0
Physical Properties | Metric | English | Comments | ||
---|---|---|---|---|---|
Density | 1.05 g/cc | 0.0379 lb/in³ | ISO 1183 | ||
Water Absorption | 2.7 % | 2.7 % | ISO 62 | ||
Moisture Absorption | 1.20 % | 1.20 % | ISO 62 | ||
Linear Mold Shrinkage, Flow | 0.030 cm/cm | 0.030 in/in | ISO 294-4, 2577 | ||
Linear Mold Shrinkage, Transverse | 0.0040 cm/cm | 0.0040 in/in | ISO 294-4, 2577 | ||
Mechanical Properties | Metric | English | Comments | ||
Ball Indentation Hardness | 70.0 MPa | 10200 psi | conditioned; ISO 2039-1 | ||
100 MPa | 14500 psi | dry; ISO 2039-1 | |||
Tensile Strength, Yield | 40.0 MPa | 5800 psi | dry; ISO 527-1/-2 | ||
50.0 MPa | 7250 psi | dry; ISO 527-1/-2 | |||
Elongation at Break | >= 50 % | >= 50 % | dry; ISO 527-1/-2 | ||
>= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | |||
Elongation at Yield | 5.0 % | 5.0 % | dry; ISO 527-1/-2 | ||
20 % | 20 % | conditioned; ISO 527-1/-2 | |||
Tensile Modulus | 1.20 GPa | 174 ksi | conditioned; ISO 527-1/-2 | ||
2.00 GPa | 290 ksi | dry; ISO 527-1/-2 | |||
Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
NB | NB | conditioned; ISO 179/1eU | |||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Charpy Impact, Notched | 4.00 J/cm² | 19.0 ft-lb/in² | dry; ISO 179/1eA | ||
9.00 J/cm² | 42.8 ft-lb/in² | conditioned; ISO 179/1eA | |||
1.20 J/cm² @Temperature 30.0 °C | 5.71 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
1.30 J/cm² @Temperature 30.0 °C | 6.19 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
Electrical Properties | Metric | English | Comments | ||
Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | dry; IEC 60093 | ||
1.00e+12 ohm-cm | 1.00e+12 ohm-cm | conditioned; IEC 60093 | |||
Surface Resistance | 1.00e+11 ohm | 1.00e+11 ohm | IEC 60093 | ||
Dielectric Strength | 40.0 kV/mm | 1020 kV/in | dry; IEC 60243-1 | ||
40.0 kV/mm | 1020 kV/in | conditioned; IEC 60243-1 | |||
Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
Thermal Properties | Metric | English | Comments | ||
CTE, linear, Parallel to Flow | 160 µm/m-°C | 88.9 µin/in-°F | ISO 11359-1/-2 | ||
CTE, linear, Transverse to Flow | 100 µm/m-°C | 55.6 µin/in-°F | ISO 11359-1/-2 | ||
Melting Point | 210 °C | 410 °F | 10°C/min; ISO 11357-1/-3 | ||
Maximum Service Temperature, Air | 120 - 140 °C | 248 - 284 °F | long term; EMS | ||
160 °C | 320 °F | short term; EMS | |||
Deflection Temperature at 0.46 MPa (66 psi) | 115 °C | 239 °F | ISO 75-1/-2 | ||
Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | ISO 75-1/-2 | ||
Flammability, UL94 | HB | HB | IEC 60695-11-10 | ||
Descriptive Properties | |||||
Automotive | Air intake sytems | ||||
Automotive electr. and electronics, lighting | |||||
Compressed air systems | |||||
Cooling and climate control | |||||
Hydraulic systems | |||||
Electricals & Electronics | Cables & Tubes | ||||
Form | Granules | ||||
Industry & Consumer goods | Hydraulics & Pneumatics | ||||
Processing | Other Extrusion | ||||
Profile Extrusion | |||||
Product Attributes | High viscosity | ||||
Hydrolysis resistant | |||||
Special Characteristics | High impact or impact modified | ||||
Improved heat resistance |