- 密度 [g/cm3]: 1.04
- 吸水率 [%]: 2.7
- 拉伸强度 [MPa]: 45.0
- 热变形温度 [℃]: 120.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ | ISO 1183 | ||
| Water Absorption | 2.7 % | 2.7 % | ISO 62 | ||
| Moisture Absorption | 1.20 % | 1.20 % | ISO 62 | ||
| Linear Mold Shrinkage, Flow | 0.030 cm/cm | 0.030 in/in | ISO 294-4, 2577 | ||
| Linear Mold Shrinkage, Transverse | 0.0040 cm/cm | 0.0040 in/in | ISO 294-4, 2577 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 70.0 MPa | 10200 psi | conditioned; ISO 2039-1 | ||
| 100 MPa | 14500 psi | dry; ISO 2039-1 | |||
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | dry; ISO 527-1/-2 | ||
| 50.0 MPa | 7250 psi | dry; ISO 527-1/-2 | |||
| Elongation at Break | >= 50 % | >= 50 % | conditioned; ISO 527-1/-2 | ||
| <= 50 % | <= 50 % | dry; ISO 527-1/-2 | |||
| Elongation at Yield | 5.0 % | 5.0 % | dry; ISO 527-1/-2 | ||
| 20 % | 20 % | conditioned; ISO 527-1/-2 | |||
| Tensile Modulus | 1.30 GPa | 189 ksi | conditioned; ISO 527-1/-2 | ||
| 1.80 GPa | 261 ksi | dry; ISO 527-1/-2 | |||
| Charpy Impact Unnotched | NB | NB | dry; ISO 179/1eU | ||
| NB | NB | conditioned; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| NB @Temperature 30.0 °C | NB @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Charpy Impact, Notched | 5.00 J/cm² | 23.8 ft-lb/in² | dry; ISO 179/1eA | ||
| 9.00 J/cm² | 42.8 ft-lb/in² | conditioned; ISO 179/1eA | |||
| 1.20 J/cm² @Temperature 30.0 °C | 5.71 ft-lb/in² @Temperature 86.0 °F | dry; ISO 179/1eU | |||
| 1.20 J/cm² @Temperature 30.0 °C | 5.71 ft-lb/in² @Temperature 86.0 °F | conditioned; ISO 179/1eU | |||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | dry; IEC 60093 | ||
| 1.00e+10 ohm-cm | 1.00e+10 ohm-cm | conditioned; IEC 60093 | |||
| Surface Resistance | 1.00e+10 ohm | 1.00e+10 ohm | IEC 60093 | ||
| Dielectric Strength | 38.0 kV/mm | 965 kV/in | dry; IEC 60243-1 | ||
| 38.0 kV/mm | 965 kV/in | conditioned; IEC 60243-1 | |||
| Comparative Tracking Index | 600 V | 600 V | conditioned; IEC 60112 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 160 µm/m-°C | 88.9 µin/in-°F | ISO 11359-1/-2 | ||
| CTE, linear, Transverse to Flow | 110 µm/m-°C | 61.1 µin/in-°F | ISO 11359-1/-2 | ||
| Melting Point | 218 °C | 424 °F | 10°C/min; ISO 11357-1/-3 | ||
| Deflection Temperature at 0.46 MPa (66 psi) | 120 °C | 248 °F | ISO 75-1/-2 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 50.0 °C | 122 °F | ISO 75-1/-2 | ||
| Descriptive Properties | |||||
| Automotive | Air intake sytems | ||||
| Compressed air systems | |||||
| Fuel systems | |||||
| Hydraulic systems | |||||
| Electricals & Electronics | Cables & Tubes | ||||
| Form | Granules | ||||
| Industry & Consumer goods | Hydraulics & Pneumatics | ||||
| Processing | Other Extrusion | ||||
| Product Attributes | High viscosity | ||||
| Hydrolysis resistant | |||||
| Improved alcohol resistance | |||||
| Special Characteristics | High impact or impact modified | ||||
| Improved heat resistance | |||||
| Improved UV resistance (outdoor use) | |||||