Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass物性表参数

Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass

Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass 物性表: Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass物性表及特性介绍,Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass注塑参数详情,如需Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass下载, 可到相关下载区下载

密度 [g/cm3]: 1.52
弯曲模量 [MPa]: 5.86

Physical Properties	Metric	English	Comments

Density	1.52 g/cc	0.0549 lb/in³	ASTM D792
Filler Content	25 %	25 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	105	105	ASTM D785
Tensile Strength	104 MPa	15100 psi	ASTM D638
Elongation at Break	2.8 %	2.8 %	ASTM D638
Flexural Strength	148 MPa	21500 psi	ASTM D790
Flexural Modulus	5.86 GPa	850 ksi	ASTM D790

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Tan

关键词:
PEEK
供应
25% Fiberglass
Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49777.html

免责声明: 本文 Ensinger Tecapeek® XP-90 Compression Molded PEEK Compound, 25% Fiberglass 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络