- 密度 [g/cm3]: 1.36
- 吸水率 [%]: 0.05
- 缺口冲击强度: 0.31
- 弯曲模量 [MPa]: 4.83
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.36 g/cc | 0.0491 lb/in³ | ASTM D792 | ||
| Filler Content | 0.00 % | 0.00 % | |||
| Water Absorption | 0.050 % @Time 86400 sec | 0.050 % @Time 24.0 hour | ASTM D570 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell M | 101 | 101 | ASTM D785 | ||
| Hardness, Shore D | 89 | 89 | ASTM D2240 | ||
| Tensile Strength | 95.1 MPa | 13800 psi | ASTM D638 | ||
| Elongation at Break | 4.5 % | 4.5 % | ASTM D638 | ||
| 4.5 % | 4.5 % | Flexural Strain; ASTM D790 | |||
| Tensile Modulus | 5.31 GPa | 770 ksi | ASTM D638 | ||
| Flexural Strength | 154 MPa | 22300 psi | ASTM D790 | ||
| Flexural Modulus | 4.83 GPa | 700 ksi | ASTM D790 | ||
| Compressive Strength | 133 MPa | 19300 psi | 10% Deformation; ASTM D695 | ||
| Compressive Modulus | 2.48 GPa | 360 ksi | ASTM D695 | ||
| Izod Impact, Notched | 0.310 J/cm | 0.580 ft-lb/in | ASTM D256 | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | 4.90e+16 ohm-cm | 4.90e+16 ohm-cm | ASTM D257 | ||
| Dielectric Strength | 19.0 kV/mm | 483 kV/in | ASTM D149 | ||
| Thermal Properties | Metric | English | Comments | ||
| Thermal Conductivity | 0.245 W/m-K | 1.70 BTU-in/hr-ft²-°F | ASTM C177 | ||
| Melting Point | 343 °C | 649 °F | DSC | ||
| Heat Distortion Temperature | 149 °C | 300 °F | ASTM D648 | ||
| Glass Transition Temp, Tg | 143 °C | 289 °F | DSC | ||
| Descriptive Properties | |||||
| Color | Tan | ||||