Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite物性表参数

Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite

Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite 物性表: Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite物性表及特性介绍,Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite注塑参数详情,如需Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite下载, 可到相关下载区下载

密度 [g/cm3]: 1.47
吸水率 [%]: 0.06
缺口冲击强度: 0.235
弯曲模量 [MPa]: 6.21

Physical Properties	Metric	English	Comments

Density	1.47 g/cc	0.0531 lb/in³	ASTM D792
Filler Content	30 %	30 %
Water Absorption	0.060 % @Time 86400 sec	0.060 % @Time 24.0 hour	ASTM D570

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	90	90	ASTM D785
Hardness, Shore D	85	85	ASTM D2240
Tensile Strength	64.8 MPa	9400 psi	ASTM D638
Elongation at Break	1.5 %	1.5 %	ASTM D638
	2.4 %	2.4 %	Flexural Strain; ASTM D790
Tensile Modulus	7.58 GPa	1100 ksi	ASTM D638
Flexural Strength	110 MPa	16000 psi	ASTM D790
Flexural Modulus	6.21 GPa	900 ksi	ASTM D790
Compressive Strength	132 MPa	19200 psi	ASTM D695
Compressive Modulus	2.28 GPa	330 ksi	ASTM D695
Izod Impact, Notched	0.235 J/cm	0.440 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Black

关键词:
PEEK
供应
Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound
Bearing Grade Material with 10% Graphite

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49796.html

免责声明: 本文 Ensinger Tecapeek® XP-100 Compression Molded PEEK Compound, Bearing Grade Material with 10% Graphite 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络