PA6 BG-30 PA6-GF30 强度和韧性之间平衡、_产品资讯

PA6 BG-30 性状为半透明或不透明乳白色结晶形聚合物，具有可塑性。密度1．15g／cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。连续耐热80-120℃,平衡吸水率2．5％。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀，但易溶于苯酚、甲酸等极性溶剂。具有优良的耐磨性、自润滑性，机械强度较高。但吸水性较大，因而尺寸稳定性较差。

颗粒：

、

物性表:

Physical Properties	Metric	English	Comments

Density	1.35 g/cc	0.0488 lb/in³	ISO 1183
Water Absorption	7.0 %	7.0 %	ISO 62
Moisture Absorption	2.00 %	2.00 %	ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0060 cm/cm	0.0060 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	100 MPa	14500 psi	conditioned; ISO 2039-1
	210 MPa	30500 psi	dry; ISO 2039-1
Tensile Strength at Break	110 MPa	16000 psi	conditioned; ISO 527-1/-2
	190 MPa	27600 psi	dry; ISO 527-1/-2
Elongation at Break	3.5 %	3.5 %	dry; ISO 527-1/-2
	6.5 %	6.5 %	conditioned; ISO 527-1/-2
Tensile Modulus	6.50 GPa	943 ksi	conditioned; ISO 527-1/-2
	10.0 GPa	1450 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	8.50 J/cm²	40.4 ft-lb/in²	dry; ISO 179/1eU
	9.50 J/cm²	45.2 ft-lb/in²	conditioned; ISO 179/1eU
	7.00 J/cm² @Temperature 30.0 °C	33.3 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	7.00 J/cm² @Temperature 30.0 °C	33.3 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	1.20 J/cm²	5.71 ft-lb/in²	dry; ISO 179/1eA
	2.00 J/cm²	9.52 ft-lb/in²	conditioned; ISO 179/1eA
	0.900 J/cm² @Temperature 30.0 °C	4.28 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	0.900 J/cm² @Temperature 30.0 °C	4.28 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	conditioned; IEC 60093
	1.00e+14 ohm-cm	1.00e+14 ohm-cm	dry; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Strength	31.0 kV/mm	787 kV/in	conditioned; IEC 60243-1
	34.0 kV/mm	864 kV/in	dry; IEC 60243-1
Comparative Tracking Index	550 V	550 V	conditioned; IEC 60112

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	30.0 µm/m-°C	16.7 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
Melting Point	222 °C	432 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	90.0 - 110 °C	194 - 230 °F	long term; EMS
	160 °C	320 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	200 °C	392 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	135 °C	275 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Descriptive Properties
Automotive	Air intake sytems
	Interior
Electricals & Electronics	Electrical appliances
	Electrical equipment
Form	Granules
Processing	Injection Molding

广泛用于制造机械、汽车、化学与电气装置的零件，如齿轮、滚子、滑轮、辊轴、泵体中叶轮、风扇叶片、高压密封围、阀座、垫片、衬套、各种把手、支撑架、电线包层等。亦可制成薄膜用作包装材料。此外，还可用于制作医疗器械、体育用品、日用品等。

上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。

PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。

欢迎各位客户前来咨询：

联系人：夏先生

手机：13501802636

QQ ：205730283

邮箱：205730283@qq.com