类别：聚合物；热塑性塑料；丙烯酸（有机玻璃）
材料说明：奎因XT片具有良好的光学性能和杰出的表面。奎因XT片提供优异的透明性，良好的机械性能，抗紫外线，具有很好的耐候性和耐老化性，多年来保持颜色不变。高冲击的成绩，奎因xt610，xt620，xt630，具有优异的力学性能和优异的抗冲击强度。奎因XT的床单和所有的高冲击性等级可用于与食品接触的，因为他们符合所有现行的欧洲食品管理立法。奎因XT片和高冲击等级不含任何有毒物质或重金属，这可能会造成环境破坏或健康风险。它不溶于水，不受有害物质鉴定。奎因XT片和高冲击级易于回收。
建筑构件：光丘，隔墙，门窗玻璃，屋面，天窗大篷车
照明：照明控制镜片，国内灯具配件
工程部件：机器外壳，机器安全罩，广告和标牌，模压信，存储显示器，店配件，照明图形板
其他应用：容器，刻字模板，日光浴，隔音墙。
物性表：
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.15 g/cc | 0.0415 lb/in³ | ISO 1183 | ||
| Water Absorption | 0.30 % | 0.30 % | 24h/23°C - 50x50x4mm; DIN 53495 Method 1 | ||
| Linear Mold Shrinkage | 0.0060 - 0.0090 cm/cm | 0.0060 - 0.0090 in/in | |||
| Mechanical Properties | Metric | English | Comments | ||
| Ball Indentation Hardness | 100 MPa | 14500 psi | ISO 2039-1 | ||
| Tensile Strength at Break | 40.0 MPa | 5800 psi | ISO 527-2 | ||
| Elongation at Break | 35 % | 35 % | ISO 527-2 | ||
| Tensile Modulus | 1.80 GPa | 261 ksi | ISO 527-2 | ||
| Flexural Strength | 65.0 MPa | 9430 psi | ISO 178 | ||
| Flexural Modulus | 1.80 GPa | 261 ksi | ISO 178 | ||
| Charpy Impact Unnotched | 6.00 J/cm² | 28.6 ft-lb/in² | ISO 179-1 | ||
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179-1 | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 2.9 @Frequency 1e+6 Hz |
2.9 @Frequency 1e+6 Hz |
|||
| Dielectric Strength | 30.0 kV/mm | 762 kV/in | DIN 53481 | ||
| Dissipation Factor | 0.030 @Frequency 1e+6 Hz |
0.030 @Frequency 1e+6 Hz |
DIN 53483-2 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 110 µm/m-°C @Temperature 20.0 °C |
61.1 µin/in-°F @Temperature 68.0 °F |
DIN 53752 | ||
| Specific Heat Capacity | 1.50 J/g-°C | 0.359 BTU/lb-°F | IEC 1006 | ||
| Thermal Conductivity | 0.180 W/m-K | 1.25 BTU-in/hr-ft²-°F | DIN 52612 | ||
| Maximum Service Temperature, Air | 65.0 °C | 149 °F | Continuous Use | ||
| 75.0 °C | 167 °F | Short Term Use | |||
| Vicat Softening Point | 98.0 °C | 208 °F | ISO 306 | ||
| Decomposition Temperature | >= 280 °C | >= 536 °F | |||
| Optical Properties | Metric | English | Comments | ||
| Refractive Index | 1.492 | 1.492 | DIN 5036-3 | ||
| Transmission, Visible | 90 % @Thickness 3.00 mm |
90 % @Thickness 0.118 in |
DIN 5036-3 | ||
| De |
|||||
| Forming Temperature, Air Pressure, °C | 130-150 | ||||
| Forming Temperature, Vacuum, °C | 140-170 | ||||
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
欢迎新老客户来电咨询;
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com