塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66美国杜邦/22C NC010 38％玻纤增强 增韧级

PA66美国杜邦/22C NC010 38％玻纤增强 增韧级

PA66/美国杜邦/22C NC010 38％玻纤增强 增韧级
 参考图片：

颗粒图片：
1058800263_878191804

包装图片：

成品图片：
100001041143_13526462585748

 

 

 
Physical Properties Metric English Comments
Density  1.28 g/cc 0.0462 lb/in³  
  1.45 g/cc 0.0524 lb/in³ DAM; ISO 1183
Water Absorption  5.4 %
@Thickness 2.00 mm		 5.4 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  1.40 %
@Thickness 2.00 mm		 1.40 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Water Absorption at Saturation  1.0 % 1.0 % DAM; Immersion 24h; ASTM D570
Viscosity  65520 cP
@Shear Rate 5000 1/s,
Temperature 305 °C		 65520 cP
@Shear Rate 5000 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  80210 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		 80210 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  99512 cP
@Shear Rate 5000 1/s,
Temperature 285 °C		 99512 cP
@Shear Rate 5000 1/s,
Temperature 545 °F		 ISO 11403-1 -2
  174500 cP
@Shear Rate 500 1/s,
Temperature 305 °C		 174500 cP
@Shear Rate 500 1/s,
Temperature 581 °F		 ISO 11403-1 -2
  232900 cP
@Shear Rate 500 1/s,
Temperature 295 °C		 232900 cP
@Shear Rate 500 1/s,
Temperature 563 °F		 ISO 11403-1 -2
  311100 cP
@Shear Rate 500 1/s,
Temperature 285 °C		 311100 cP
@Shear Rate 500 1/s,
Temperature 545 °F		 ISO 11403-1 -2
Viscosity Test  150 cm³/g 150 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0070 cm/cm 0.0070 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.0090 cm/cm 0.0090 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  82.0 MPa 11900 psi 50%RH; ISO 527-1/-2
  130 MPa 18900 psi DAM; ISO 527-1/-2
Tensile Stress   4.30 MPa
@Strain 0.200 %,
Temperature 150 °C		 624 psi
@Strain 0.200 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  4.60 MPa
@Strain 0.100 %,
Temperature 23.0 °C		 667 psi
@Strain 0.100 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  7.20 MPa
@Strain 0.100 %,
Temperature 23.0 °C		 1040 psi
@Strain 0.100 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  7.60 MPa
@Strain 0.100 %,
Temperature 0.000 °C		 1100 psi
@Strain 0.100 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  8.90 MPa
@Strain 0.400 %,
Temperature 150 °C		 1290 psi
@Strain 0.400 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  17.3 MPa
@Strain 0.900 %,
Temperature 150 °C		 2510 psi
@Strain 0.900 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  17.45 MPa
@Strain 0.200 %,
Temperature -40.0 °C		 2531 psi
@Strain 0.200 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  17.6 MPa
@Strain 0.900 %,
Temperature 150 °C		 2550 psi
@Strain 0.900 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  18.3 MPa
@Strain 0.200 %,
Temperature 0.000 °C		 2650 psi
@Strain 0.200 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  19.87 MPa
@Strain 0.200 %,
Temperature -40.0 °C		 2882 psi
@Strain 0.200 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  22.9 MPa
@Strain 1.30 %,
Temperature 150 °C		 3320 psi
@Strain 1.30 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  26.0 MPa
@Strain 0.600 %,
Temperature 23.0 °C		 3770 psi
@Strain 0.600 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  32.2 MPa
@Strain 2.10 %,
Temperature 150 °C		 4670 psi
@Strain 2.10 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  34.3 MPa
@Strain 2.60 %,
Temperature 150 °C		 4970 psi
@Strain 2.60 %,
Temperature 302 °F		 50%RH; ISO 11403-1 -2
  39.2 MPa
@Strain 1.00 %,
Temperature 23.0 °C		 5690 psi
@Strain 1.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  40.2 MPa
@Strain 3.20 %,
Temperature 150 °C		 5830 psi
@Strain 3.20 %,
Temperature 302 °F		 DAM; ISO 11403-1 -2
  41.5 MPa
@Strain 0.500 %,
Temperature 0.000 °C		 6020 psi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  51.7 MPa
@Strain 1.50 %,
Temperature 23.0 °C		 7500 psi
@Strain 1.50 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  55.50 MPa
@Strain 0.700 %,
Temperature -40.0 °C		 8050 psi
@Strain 0.700 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  57.12 MPa
@Strain 0.600 %,
Temperature -40.0 °C		 8285 psi
@Strain 0.600 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  60.1 MPa
@Strain 0.800 %,
Temperature 0.000 °C		 8720 psi
@Strain 0.800 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  62.24 MPa
@Strain 0.900 %,
Temperature 23.0 °C		 9027 psi
@Strain 0.900 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  64.1 MPa
@Strain 0.900 %,
Temperature 0.000 °C		 9300 psi
@Strain 0.900 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  79.97 MPa
@Strain 0.900 %,
Temperature -40.0 °C		 11600 psi
@Strain 0.900 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  80.3 MPa
@Strain 1.30 %,
Temperature 0.000 °C		 11600 psi
@Strain 1.30 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  84.53 MPa
@Strain 1.30 %,
Temperature 23.0 °C		 12260 psi
@Strain 1.30 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  86.6 MPa
@Strain 1.20 %,
Temperature 0.000 °C		 12600 psi
@Strain 1.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  93.49 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 13560 psi
@Strain 1.30 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  101.13 MPa
@Strain 1.70 %,
Temperature 23.0 °C		 14668 psi
@Strain 1.70 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  103 MPa
@Strain 1.50 %,
Temperature 0.000 °C		 14900 psi
@Strain 1.50 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  104.54 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 15162 psi
@Strain 1.30 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  114.7 MPa
@Strain 1.70 %,
Temperature -40.0 °C		 16640 psi
@Strain 1.70 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  126.42 MPa
@Strain 3.30 %,
Temperature 23.0 °C		 18336 psi
@Strain 3.30 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  149.8 MPa
@Strain 3.20 %,
Temperature 0.000 °C		 21730 psi
@Strain 3.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  160.7 MPa
@Strain 3.20 %,
Temperature -40.0 °C		 23310 psi
@Strain 3.20 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  165.9 MPa
@Strain 3.20 %,
Temperature -40.0 °C		 24050 psi
@Strain 3.20 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  10.0 MPa
@Strain 0.340 %,
Time 3600 sec		 1450 psi
@Strain 0.340 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.370 %,
Time 36000 sec		 1450 psi
@Strain 0.370 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.410 %,
Time 360000 sec		 1450 psi
@Strain 0.410 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  10.0 MPa
@Strain 0.460 %,
Time 3.60e+6 sec		 1450 psi
@Strain 0.460 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
Elongation at Break  3.5 % 3.5 % DAM; ISO 527-1/-2
  10 % 10 % 50%RH; ISO 527-1/-2
Tensile Modulus  5.00 GPa 725 ksi 50%RH; ISO 527-1/-2
  7.50 GPa 1090 ksi DAM; ISO 527-1/-2
  1.4166 GPa
@Temperature 170 °C		 205.46 ksi
@Temperature 338 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.84 GPa
@Temperature 110 °C		 267 ksi
@Temperature 230 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.965 GPa
@Temperature 170 °C		 285.0 ksi
@Temperature 338 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.649 GPa
@Temperature 110 °C		 384.2 ksi
@Temperature 230 °F		 DAM; Dynamic; ISO 11403-1 -2
  5.04 GPa
@Temperature 30.0 °C		 731 ksi
@Temperature 86.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  5.88 GPa
@Temperature -20.0 °C		 853 ksi
@Temperature -4.00 °F		 50%RH; Dynamic; ISO 11403-1 -2
  6.55 GPa
@Temperature -70.0 °C		 950 ksi
@Temperature -94.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  6.942 GPa
@Temperature -100 °C		 1007 ksi
@Temperature -148 °F		 50%RH; Dynamic; ISO 11403-1 -2
  7.137 GPa
@Temperature 30.0 °C		 1035 ksi
@Temperature 86.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  7.24 GPa
@Temperature -20.0 °C		 1050 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  7.739 GPa
@Temperature -70.0 °C		 1122 ksi
@Temperature -94.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  8.00 GPa
@Temperature -100 °C		 1160 ksi
@Temperature -148 °F		 DAM; Dynamic; ISO 11403-1 -2
Flexural Modulus  5.00 GPa 725 ksi 50%RH; ISO 178
  6.50 GPa 943 ksi DAM; ISO 178
Shear Modulus   0.7116 GPa
@Temperature 100 °C		 103.2 ksi
@Temperature 212 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.042 GPa
@Temperature 60.0 °C		 151.2 ksi
@Temperature 140 °F		 50%RH; Dynamic; ISO 11403-1 -2
  1.095 GPa
@Temperature 100 °C		 158.8 ksi
@Temperature 212 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.021 GPa
@Temperature 10.0 °C		 293.2 ksi
@Temperature 50.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.152 GPa
@Temperature -40.0 °C		 312.1 ksi
@Temperature -40.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.338 GPa
@Temperature -70.0 °C		 339.1 ksi
@Temperature -94.0 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.403 GPa
@Temperature 60.0 °C		 348.5 ksi
@Temperature 140 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.478 GPa
@Temperature -100 °C		 359.4 ksi
@Temperature -148 °F		 50%RH; Dynamic; ISO 11403-1 -2
  2.684 GPa
@Temperature 10.0 °C		 389.3 ksi
@Temperature 50.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.738 GPa
@Temperature -40.0 °C		 397.1 ksi
@Temperature -40.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.888 GPa
@Temperature -70.0 °C		 418.9 ksi
@Temperature -94.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  2.986 GPa
@Temperature -100 °C		 433.1 ksi
@Temperature -148 °F		 DAM; Dynamic; ISO 11403-1 -2
Secant Modulus   0.784 GPa
@Strain 7.50 %,
Temperature 100 °C		 114 ksi
@Strain 7.50 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  1.14 GPa
@Strain 6.00 %,
Temperature 80.0 °C		 165 ksi
@Strain 6.00 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.37 GPa
@Strain 3.90 %,
Temperature 80.0 °C		 198 ksi
@Strain 3.90 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.43 GPa
@Strain 3.50 %,
Temperature 100 °C		 207 ksi
@Strain 3.50 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  1.52 GPa
@Strain 2.90 %,
Temperature 100 °C		 220 ksi
@Strain 2.90 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  1.77 GPa
@Strain 3.50 %,
Temperature 80.0 °C		 257 ksi
@Strain 3.50 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.816 GPa
@Strain 2.50 %,
Temperature 80.0 °C		 263.4 ksi
@Strain 2.50 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.825 GPa
@Strain 2.00 %,
Temperature 100 °C		 264.7 ksi
@Strain 2.00 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.00 GPa
@Strain 1.60 %,
Temperature 100 °C		 290 ksi
@Strain 1.60 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  2.035 GPa
@Strain 4.00 %,
Temperature 23.0 °C		 295.2 ksi
@Strain 4.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.24 GPa
@Strain 1.40 %,
Temperature 80.0 °C		 324 ksi
@Strain 1.40 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  2.27 GPa
@Strain 2.10 %,
Temperature 80.0 °C		 329 ksi
@Strain 2.10 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  2.31 GPa
@Strain 0.700 %,
Temperature 100 °C		 336 ksi
@Strain 0.700 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.32 GPa
@Strain 0.900 %,
Temperature 100 °C		 337 ksi
@Strain 0.900 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  2.40 GPa
@Strain 0.200 %,
Temperature 100 °C		 348 ksi
@Strain 0.200 %,
Temperature 212 °F		 DAM; ISO 11403-1 -2
  2.65 GPa
@Strain 0.200 %,
Temperature 100 °C		 384 ksi
@Strain 0.200 %,
Temperature 212 °F		 50%RH; ISO 11403-1 -2
  2.83 GPa
@Strain 0.300 %,
Temperature 80.0 °C		 411 ksi
@Strain 0.300 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  2.90 GPa
@Strain 0.900 %,
Temperature 80.0 °C		 421 ksi
@Strain 0.900 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  3.01 GPa
@Strain 2.10 %,
Temperature 23.0 °C		 437 ksi
@Strain 2.10 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.265 GPa
@Strain 0.200 %,
Temperature 80.0 °C		 473.6 ksi
@Strain 0.200 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  3.81 GPa
@Strain 1.10 %,
Temperature 23.0 °C		 552 ksi
@Strain 1.10 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4.10 GPa
@Strain 2.70 %,
Temperature 0.000 °C		 595 ksi
@Strain 2.70 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.33 GPa
@Strain 0.600 %,
Temperature 23.0 °C		 629 ksi
@Strain 0.600 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  4.55 GPa
@Strain 2.70 %,
Temperature 23.0 °C		 660 ksi
@Strain 2.70 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.60 GPa
@Strain 0.100 %,
Temperature 23.0 °C		 667 ksi
@Strain 0.100 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  5.40 GPa
@Strain 2.60 %,
Temperature 0.000 °C		 784 ksi
@Strain 2.60 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.43 GPa
@Strain 1.70 %,
Temperature 0.000 °C		 787 ksi
@Strain 1.70 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.515 GPa
@Strain 2.00 %,
Temperature 23.0 °C		 799.9 ksi
@Strain 2.00 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.58 GPa
@Strain 2.80 %,
Temperature -40.0 °C		 809 ksi
@Strain 2.80 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.10 GPa
@Strain 2.40 %,
Temperature -40.0 °C		 884 ksi
@Strain 2.40 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  6.25 GPa
@Strain 1.50 %,
Temperature 23.0 °C		 906 ksi
@Strain 1.50 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  6.34 GPa
@Strain 1.90 %,
Temperature 0.000 °C		 919 ksi
@Strain 1.90 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  6.42 GPa
@Strain 2.00 %,
Temperature -40.0 °C		 931 ksi
@Strain 2.00 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.86 GPa
@Strain 1.00 %,
Temperature 0.000 °C		 995 ksi
@Strain 1.00 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  6.92 GPa
@Strain 0.900 %,
Temperature 23.0 °C		 1000 ksi
@Strain 0.900 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  6.97 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 1010 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  7.11 GPa
@Strain 1.30 %,
Temperature 0.000 °C		 1030 ksi
@Strain 1.30 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.20 GPa
@Strain 0.100 %,
Temperature 23.0 °C		 1040 ksi
@Strain 0.100 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  7.5125 GPa
@Strain 0.800 %,
Temperature 0.000 °C		 1089.6 ksi
@Strain 0.800 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.60 GPa
@Strain 0.100 %,
Temperature 0.000 °C		 1100 ksi
@Strain 0.100 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  7.64 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 1110 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  7.93 GPa
@Strain 0.700 %,
Temperature -40.0 °C		 1150 ksi
@Strain 0.700 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  8.30 GPa
@Strain 0.500 %,
Temperature 0.000 °C		 1200 ksi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  8.669 GPa
@Strain 1.00 %,
Temperature -40.0 °C		 1257 ksi
@Strain 1.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  8.73 GPa
@Strain 0.200 %,
Temperature -40.0 °C		 1270 ksi
@Strain 0.200 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  9.15 GPa
@Strain 0.200 %,
Temperature 0.000 °C		 1330 ksi
@Strain 0.200 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  9.52 GPa
@Strain 0.600 %,
Temperature -40.0 °C		 1380 ksi
@Strain 0.600 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  9.935 GPa
@Strain 0.200 %,
Temperature -40.0 °C		 1441 ksi
@Strain 0.200 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
Izod Impact, Notched (ISO)  5.00 kJ/m² 2.38 ft-lb/in² DAM; ISO 180/1A
  6.00 kJ/m² 2.86 ft-lb/in² 50%RH; ISO 180/1A
  4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
  4.00 kJ/m²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
  4.00 kJ/m²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  4.00 kJ/m²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 180/1A
Izod Impact, Unnotched (ISO)  40.0 kJ/m² 19.0 ft-lb/in² 50%RH; ISO 180/1U
  50.0 kJ/m² 23.8 ft-lb/in² DAM; ISO 180/1U
  40.0 kJ/m²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1U
  50.0 kJ/m²
@Temperature -30.0 °C		 23.8 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1U
Charpy Impact Unnotched  4.50 J/cm² 21.4 ft-lb/in² 50%RH; ISO 179/1eU
  5.00 J/cm² 23.8 ft-lb/in² DAM; ISO 179/1eU
  3.50 J/cm²
@Temperature -30.0 °C		 16.7 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
  4.00 J/cm²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  0.400 J/cm² 1.90 ft-lb/in² DAM; ISO 179/1eA
  0.600 J/cm² 2.86 ft-lb/in² 50%RH; ISO 179/1eA
  0.300 J/cm²
@Temperature -30.0 °C		 1.43 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
  0.300 J/cm²
@Temperature -40.0 °C		 1.43 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 179/1eA
  0.300 J/cm²
@Temperature -40.0 °C		 1.43 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 179/1eA
  0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour   1360 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 197000 psi
@Pressure 4350 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1370 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 198000 psi
@Pressure 3630 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1400 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 202000 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1490 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 215000 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1690 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 245000 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1760 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 255000 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1800 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 262000 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1980 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 287000 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2200 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 319000 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2220 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 322000 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2290 MPa
@Pressure 35.0 MPa,
Temperature 23.0 °C		 332000 psi
@Pressure 5080 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2370 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 344000 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2380 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 345000 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  2480 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 360000 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2610 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 379000 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2770 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 402000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2940 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 427000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3070 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 445000 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2300 MPa
@Time 3600 sec		 334000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours   820 MPa
@Pressure 30.0 MPa,
Temperature 60.0 °C		 119000 psi
@Pressure 4350 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  857 MPa
@Pressure 25.0 MPa,
Temperature 60.0 °C		 124000 psi
@Pressure 3630 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  909 MPa
@Pressure 20.0 MPa,
Temperature 60.0 °C		 132000 psi
@Pressure 2900 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  980 MPa
@Pressure 15.0 MPa,
Temperature 60.0 °C		 142000 psi
@Pressure 2180 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1080 MPa
@Pressure 10.0 MPa,
Temperature 60.0 °C		 156000 psi
@Pressure 1450 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1190 MPa
@Pressure 5.00 MPa,
Temperature 60.0 °C		 173000 psi
@Pressure 725 psi,
Temperature 140 °F		 50%RH; ISO 11403-1 -2
  1420 MPa
@Pressure 20.0 MPa,
Temperature 120 °C		 206000 psi
@Pressure 2900 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1530 MPa
@Pressure 15.0 MPa,
Temperature 120 °C		 222000 psi
@Pressure 2180 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1530 MPa
@Pressure 40.0 MPa,
Temperature 23.0 °C		 222000 psi
@Pressure 5800 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1550 MPa
@Pressure 35.0 MPa,
Temperature 23.0 °C		 225000 psi
@Pressure 5080 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1580 MPa
@Pressure 30.0 MPa,
Temperature 23.0 °C		 230000 psi
@Pressure 4350 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1630 MPa
@Pressure 25.0 MPa,
Temperature 23.0 °C		 237000 psi
@Pressure 3630 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1710 MPa
@Pressure 10.0 MPa,
Temperature 120 °C		 248000 psi
@Pressure 1450 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  1720 MPa
@Pressure 20.0 MPa,
Temperature 23.0 °C		 250000 psi
@Pressure 2900 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1900 MPa
@Pressure 15.0 MPa,
Temperature 23.0 °C		 276000 psi
@Pressure 2180 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1950 MPa
@Pressure 5.00 MPa,
Temperature 120 °C		 283000 psi
@Pressure 725 psi,
Temperature 248 °F		 DAM; ISO 11403-1 -2
  2170 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 315000 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2420 MPa
@Pressure 5.00 MPa,
Temperature 23.0 °C		 350000 psi
@Pressure 725 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1500 MPa
@Time 3.60e+6 sec		 218000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+9 ohm-cm 1.00e+9 ohm-cm 50%RH; IEC 60093
  1.00e+13 ohm-cm 1.00e+13 ohm-cm DAM; IEC 60093
Surface Resistance  3.00e+12 ohm 3.00e+12 ohm 50%RH; IEC 60093
Dielectric Constant   4.0
@Frequency 100 Hz		 4.0
@Frequency 100 Hz		 DAM; IEC 60250
  4.0
@Frequency 1.00e+6 Hz		 4.0
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.0
@Frequency 1.00e+6 Hz		 4.0
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  7.0
@Frequency 100 Hz		 7.0
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  39.0 kV/mm 991 kV/in 50%RH; IEC 60243-1
  40.0 kV/mm 1020 kV/in DAM; IEC 60243-1
Dissipation Factor   0.010
@Frequency 100 Hz		 0.010
@Frequency 100 Hz		 DAM; IEC 60250
  0.010
@Frequency 1.00e+6 Hz		 0.010
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.020
@Frequency 100 Hz		 0.020
@Frequency 100 Hz		 50%RH; IEC 60250
  0.050
@Frequency 1.00e+6 Hz		 0.050
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
Comparative Tracking Index  475 V 475 V DAM; IEC 60112
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  41.0 µm/m-°C 22.8 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  62.0 µm/m-°C 34.4 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.10 J/g-°C 0.502 BTU/lb-°F  
Thermal Conductivity  0.250 W/m-K 1.74 BTU-in/hr-ft²-°F of melt
Melting Point  263 °C 505 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  255 °C 491 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  230 °C 446 °F DAM; ISO 75-1/-2
Glass Transition Temp, Tg  80.0 °C 176 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94   HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.800 mm		 HB
@Thickness 0.0315 in		 DAM; IEC 60695-11-10
Flame Spread  40 mm/min
@Thickness 1.00 mm		 1.6 in/min
@Thickness 0.0394 in		 ISO 3795 (FMVSS 302)
Oxygen Index  24 % 24 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Part Marking Code >PA66-(MD+GF)38< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  North America  
  South and Central America  
Resin Identification PA66-(MD+GF)38  
Special characteristics Heat stabilised or stable to heat  
UL recognition UL DAM

概述

PA塑料(尼龙，聚酰胺)，英文名称:Polyamide

PA的品种繁多，有PA6、PA66、PAll、PAl2、PA46、PA610、PA612、PAl010等，以及近几年开发的半芳香族尼龙PA6T和特种尼龙等很多新品种。

物理性能

比重：PA6 1.14克/立方厘米，PA66 1.15克/立方厘米，PA1010 1.05克/立方厘米

成型收缩率：PA6 0.8-2.5% ，PA66 1.5-2.2%

成型温度：220-300℃

干燥条件：100-110℃/12小时

坚韧、耐磨、耐油、,耐水、抗酶菌、但吸水大

燃烧鉴别方法：火焰上端黄色，下端蓝色，燃烧后塑料熔滴落，起泡，离火后特殊的羊毛，指甲烧焦味和带芹菜味

尼龙6：

弹性好，冲击强度，吸水较大

尼龙66：

性能优于尼龙6，强度高，耐磨性好

尼龙610：

与尼龙66相似，但吸水小，刚度低

尼龙1010：

半透明，吸水小。耐寒性较好。适于制作一般机械零件、减磨耐磨零件、传动零件以及化工、电器、仪表等零件

成型性能

1、结晶料，熔点较高，熔融温度范围窄，热稳定性差，料温超过300度、滞留时间超过30分钟即分解。较易吸湿，需干燥，含水量不得超过0.3%。

2、流动性好，易溢料。宜用自锁时喷嘴，并应加热。

3、成型收缩范围及收缩率大，方向性明显，易发生缩孔、变形等。

4、模温按塑件壁厚在20～90度范围内选取，注射压力按注射机类型、料温、塑件形状尺寸、模具浇注系统选定，成型周期按塑件壁厚选定。树脂粘度小时，注射、冷却时间应取长，并用白油作脱模剂。

5、模具浇注系统的形式和尺寸，增大流道和浇口尺寸可减少缩水。

聚酰胺的不足之处在于：由于热膨胀和吸水性所至的尺寸精度不够，耐酸性差，硬度和弹性模量不够。经改良以后，也是比较优秀的工程塑料之一。

应用

汽车制造方面

用于制造燃料滤网、燃料过滤器、罐、捕集器、储油槽、发动机汽缸盖罩、散热器水缸、平衡旋转轴齿轮。也可用在汽车的电器配件、接线柱等。另外，它还可用作驱动、控制部件等。

电器电子工业

可用于制造电饭锅、电动吸尘器、高频电子食品加热器，电器产品的接线柱、开关和电阻器等。

医疗器械仪器

用于医用输血管、取血器、输液器等。PA单丝可做外科手术缝线、假发等；另外，电子打字机的数字旋转盘、接线柱、传动齿轮、印刷机的带式过滤片等。

其它方面

用于制作一次性打火机体、碱性干电池衬垫，摩托车驾驶员的头盔，办公机器外壳，办公用椅的角轮、座和靠背，冰鞋、钓鱼线等，PA薄膜气体阻隔性能优良，而且耐油性、耐低温冲击性、耐穿透性好，可用于肉、火腿肠等冷冻食品的包装。聚酰胺还可棒材和板材，也作齿轮或其它传动装置。

上海浩铭塑胶有限公司！本公司承诺，所有产品都是原厂家，原包装一线独家营销！

可提供以下报告：COA（产地证明）SGS（检测报告）MSDS（成分报告）FDA（食品安全报告）UL黄卡（出口报告）正规发票！欢迎新老客户来电咨询：

联系人：邓小姐

联系电话：13917657923

联系QQ:996152797

联系邮箱：996152797@qq.com

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-39755.html

免责声明: 本文 PA66美国杜邦/22C NC010 38％玻纤增强 增韧级 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4