| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.67 g/cc | 0.0603 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage | 0.0040 cm/cm | 0.0040 in/in | Post Shrinkage (5 h, 140°C) on 2 mm sheets with film gate at rim, mold temperature 80°C |
| 0.013 cm/cm @Thickness 2.00 mm |
0.013 in/in @Thickness 0.0787 in |
sheet with film gate at rim, mold temperature 80°C | |
| Linear Mold Shrinkage, Transverse | 0.0030 cm/cm | 0.0030 in/in | Post Shrinkage (5 h, 140°C) on 2 mm sheets with film gate at rim, mold temperature 80°C |
| 0.014 cm/cm | 0.014 in/in | ||
| Melt Flow | 61.79 g/10 min @Load 2.16 kg, Temperature 250 °C |
61.79 g/10 min @Load 4.76 lb, Temperature 482 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 44.0 MPa | 6380 psi | ISO 527-1/2 |
| Elongation at Break | 1.1 % | 1.1 % | ISO 527-1/2 |
| Tensile Modulus | 4.80 GPa | 696 ksi | ISO 527-1/-2 |
| Charpy Impact Unnotched | 1.50 J/cm² @Temperature 23.0 °C |
7.14 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eU |
| Charpy Impact, Notched | 0.210 J/cm² @Temperature 23.0 °C |
0.999 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
| Flammability, UL94 | V-0 @Thickness 0.800 mm |
V-0 @Thickness 0.0315 in |
IEC 60695 |
| V-0 @Thickness 1.60 mm |
V-0 @Thickness 0.0630 in |
IEC 60695 |
|
上海松翰塑化科技有限公司！本公司承诺，假一赔百！所有产品都是原厂家，原包装一线独家营销！
我司所销售所有产品均为原厂原包，均可提供相关资料报告（如：物性表，MSDS报告，UL报告，COA报告，SGS报告，FDA等）！
欢迎新老客户来电或QQ咨询：
联系人：李先生
联系电话；13636696005
联系QQ；1020580970
联系邮箱；1020580970@qq.com