Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.30 g/cc | 0.0470 lb/in³ | ISO 1183-1 |
Moisture Absorption at Equilibrium | 0.20 % | 0.20 % | ISO 62, 50% RH |
Water Absorption at Saturation | 0.50 % | 0.50 % | ISO 62 |
Viscosity | 380000 cP @Shear Rate 1000 1/s, Temperature 260 °C |
380000 cP @Shear Rate 1000 1/s, Temperature 500 °F |
melt viscosity; b.o. ISO 11443-A |
Linear Mold Shrinkage, Flow | 0.0040 - 0.0050 cm/cm @Thickness 3.00 mm |
0.0040 - 0.0050 in/in @Thickness 0.118 in |
150x105x3mm; b.o. ISO 2577 |
Linear Mold Shrinkage, Transverse | 0.0040 - 0.0050 cm/cm @Thickness 3.00 mm |
0.0040 - 0.0050 in/in @Thickness 0.118 in |
150x105x3mm; b.o. ISO 2577 |
Melt Flow | 13.0 g/10 min @Load 5.00 kg, Temperature 260 °C |
13.0 g/10 min @Load 11.0 lb, Temperature 500 °F |
ISO 1133 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 50.0 MPa | 7250 psi | 50 mm/min; ISO 527-1,-2 |
Tensile Strength, Yield | 63.0 MPa | 9140 psi | 50 mm/min; ISO 527-1,-2 |
Elongation at Break | 15 % | 15 % | 50 mm/min; ISO 527-1,-2 |
Elongation at Yield | 4.0 % | 4.0 % | 50 mm/min; ISO 527-1,-2 |
Tensile Modulus | 3.95 GPa | 573 ksi | 1 mm/min; ISO 527-1,-2 |
Izod Impact, Notched (ISO) | 7.00 kJ/m² @Temperature -30.0 °C |
3.33 ft-lb/in² @Temperature -22.0 °F |
ISO 180-A |
9.00 kJ/m² @Temperature 23.0 °C |
4.28 ft-lb/in² @Temperature 73.4 °F |
ISO 180-A | |
Thermal Properties | Metric | English | Comments |
CTE, linear, Parallel to Flow | 48.0 µm/m-°C @Temperature 23.0 - 55.0 °C |
26.7 µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-1,-2 |
CTE, linear, Transverse to Flow | 59.0 µm/m-°C @Temperature 23.0 - 55.0 °C |
32.8 µin/in-°F @Temperature 73.4 - 131 °F |
ISO 11359-1,-2 |
Deflection Temperature at 1.8 MPa (264 psi) | 94.0 °C | 201 °F | ISO 75-1,-2 |
Vicat Softening Point | 106 °C @Load 5.10 kg |
223 °F @Load 11.2 lb |
50°C/h; ISO 306 |
108 °C @Load 5.10 kg |
226 °F @Load 11.2 lb |
120°C/h; ISO 306 | |
Flammability, UL94 | V-0 @Thickness 0.750 mm |
V-0 @Thickness 0.0295 in |
|
5VA @Thickness 2.00 mm |
5VA @Thickness 0.0787 in |
||
5VA @Thickness 3.00 mm |
5VA @Thickness 0.118 in |
||
Processing Properties | Metric | English | Comments |
Melt Temperature | 260 °C | 500 °F | Injection molding; ISO 294 |
Mold Temperature | 80.0 °C | 176 °F | Injection molding; ISO 294 |
Injection Velocity | 240 mm/sec | 9.45 in/sec | ISO 294 |
图:
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!
我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
欢迎新老客户来电或QQ咨询:
联系人:李生
联系电话;13636696005
联系QQ;1020580970
联系邮箱;1020580970@qq.com