物性表:
图:
Physical Properties | Metric | English | Comments |
---|---|---|---|
Viscosity | 410000 cP @Shear Rate 1000 1/s, Temperature 260 °C |
410000 cP @Shear Rate 1000 1/s, Temperature 500 °F |
melt viscosity; b.o. ISO 11443-A |
Melt Flow | 22.0 g/10 min @Load 0.00000510 kg, Temperature 260 °C |
22.0 g/10 min @Load 0.0000110 lb, Temperature 500 °F |
cm3/10 min; ISO 1133 |
Mechanical Properties | Metric | English | Comments |
Tensile Strength at Break | 60.0 MPa | 8700 psi | 50 mm/min; ISO 527-1,-2 |
Tensile Strength, Yield | 65.0 MPa | 9430 psi | 50 mm/min; ISO 527-1,-2 |
Elongation at Break | >= 50 % | >= 50 % | 50 mm/min; b.o. ISO 527-1,-2 |
Elongation at Yield | 5.0 % | 5.0 % | 50 mm/min; ISO 527-1,-2 |
Tensile Modulus | 2.50 GPa | 363 ksi | 1 mm/min; ISO 527-1,-2 |
Izod Impact, Notched (ISO) | 10.0 kJ/m² @Temperature -30.0 °C |
4.76 ft-lb/in² @Temperature -22.0 °F |
ISO 180-A |
40.0 kJ/m² @Temperature 23.0 °C |
19.0 ft-lb/in² @Temperature 73.4 °F |
ISO 180-A | |
Thermal Properties | Metric | English | Comments |
Deflection Temperature at 1.8 MPa (264 psi) | 104 °C | 219 °F | ISO 75-1,-2 |
Vicat Softening Point | 120 °C @Load 5.10 kg |
248 °F @Load 11.2 lb |
50°C/h; ISO 306 |
122 °C @Load 5.10 kg |
252 °F @Load 11.2 lb |
120°C/h; ISO 306 | |
Flammability, UL94 | V-1 @Thickness 0.750 mm |
V-1 @Thickness 0.0295 in |
|
V-0 @Thickness 1.50 mm |
V-0 @Thickness 0.0591 in |
||
Processing Properties | Metric | English | Comments |
Melt Temperature | 260 °C | 500 °F | Injection molding; ISO 294 |
Mold Temperature | 80.0 °C | 176 °F | Injection molding; ISO 294 |
Injection Velocity | 240 mm/sec | 9.45 in/sec | ISO 294 |
图:
上海松翰塑化科技有限公司!本公司承诺,假一赔百!所有产品都是原厂家,原包装一线独家营销!
我司所销售所有产品均为原厂原包,均可提供相关资料报告(如:物性表,MSDS报告,UL报告,COA报告,SGS报告,FDA等)!
欢迎新老客户来电或QQ咨询:
联系人:李生
联系电话;13636696005
联系QQ;1020580970
联系邮箱;1020580970@qq.com